93 Zr1 Clutch Slave Cyl

[Route 66]

I need to replace or rebuild the clutch slave cylinder on my 93 ZR1. Looking for input from others as to what they have done. I would prefer buying American made parts if possible. Your input would be most appreciated. Thanks Ellis

[1991 Corvette ZR-1]

Someone may be holding onto a NOS part that you could buy. Another option is to reach out to Bill Bourdeau as he used to rebuild the masters but possibly the slave as well.

http://www.zfdoc.com/

Zip Corvette has this as a replacement. Appears to be the steel version with the skinny mounting flange and not a cast iron replacement.

https://www.zip-corvette.com/91-96-clutch-slave-cylinder.html?gclid=Cj0KCQjwpdqDBhCSARIsAEUJ0hNtbr zQvEJcnuvoCvSLMPxAO5Re0ZlPkG1Als40qBSF5VZgmSMQ-8kaAjz3EALw_wcB

[Route 66]

Thank you. I will contact ZFDoc

[Paul Workman]

Rock Auto (https://www.rockauto.com/en/catalog/chevrolet,1993,corvette,5.7l+v8+dohc,1041343,trans mission-manual,clutch+slave+cylinder,2044) carries the cast iron clutch slave cylinders you want.