PDA

View Full Version : Wanted: 1992-1995 ZR-1 Springs

Erik
02-10-2021, 05:15 PM
Looking for a set of springs from a 1992-1995 ZR-1. Whatcha got?
bowtiguy
02-11-2021, 02:23 PM
Looking for a set of springs from a 1992-1995 ZR-1. Whatcha got?

Erik,

what spring rates/ part#'s are you looking for? I'm pretty sure there are a few C4 springs in my fathers parts stash. I can check the next time I head back to Illinois in the next month or so.

-=MIke
Erik
02-11-2021, 02:35 PM
Erik,

what spring rates/ part#'s are you looking for? I'm pretty sure there are a few C4 springs in my fathers parts stash. I can check the next time I head back to Illinois in the next month or so.

-=MIke

It seems like they are FSM and RHY. But there is some question about the front code.

Thanks very much!
Erik
-=Jeff=-
02-12-2021, 10:55 AM
https://www.corvetteactioncenter.com/specs/c4/1984-1996-corvette-suspension.html

that might help
Joelbbvette
02-12-2021, 11:26 AM
Eric, so I would find a person with a 92-95 and the build sheet. It will list the Springs by the letter codes which should be helpful. BTW, does your 90 have an AA front spring?

Joel
Erik
02-12-2021, 04:35 PM
Eric, so I would find a person with a 92-95 and the build sheet. It will list the Springs by the letter codes which should be helpful. BTW, does your 90 have an AA front spring?

Joel

I believe it does. I'm just going through the steps of getting my build sheet. That should answer it definitively.

Maybe I should start a separate thread asking folks what spring codes people have on their build sheets.
bowtiguy
02-12-2021, 05:07 PM
I believe it does. I'm just going through the steps of getting my build sheet. That should answer it definitively.

Maybe I should start a separate thread asking folks what spring codes people have on their build sheets.


my 1991

front AA
Rear NYR
Joelbbvette
02-12-2021, 10:49 PM
my 1991

front AA
Rear NYR




My early #277 90 is the same.


Joel
dredgeguy
02-13-2021, 09:30 AM
My 92 #246 has FSM for front and RHY for rear. Attached copy of my build sheet.
91vettezr1
02-15-2021, 04:38 PM
Looking for a set of springs from a 1992-1995 ZR-1. Whatcha got?

i have a 94 zr-1 rear spring from a car with 56k miles. i will take a picture if interested
Erik
02-19-2021, 11:49 PM
i have a 94 zr-1 rear spring from a car with 56k miles. i will take a picture if interested

Please do!
91vettezr1
02-20-2021, 01:30 PM
try today
91vettezr1
02-21-2021, 07:01 PM
here are a few pics
Stingray1967
02-22-2021, 05:29 PM
I replaced my front spring with a gently used FHA code spring. The RHY code spring in my car I believe to be original. The ride height balanced out perfectly.
Divinia
11-06-2021, 07:37 AM
The car was lowered when I got it. It was way too low. People back in the day would remove the two center rubber mounts (I think they are rubber) on the front spring. I couldn?t stand how low it sat. Looked cool, but made it tough to drive. So, I had Frank Para Chevrolet in Irving, Texas put a new front spring and different bolts on the back to raise it back up to factory specs. The code should be correct but I don?t remember the details.

D.
Stingray1967
11-07-2021, 10:45 AM
The car was lowered when I got it. It was way too low. People back in the day would remove the two center rubber mounts (I think they are rubber) on the front spring. I couldn?t stand how low it sat. Looked cool, but made it tough to drive. So, I had Frank Para Chevrolet in Irving, Texas put a new front spring and different bolts on the back to raise it back up to factory specs. The code should be correct but I don?t remember the details.

D.

Thanks much!