Starter Solenoid Connector

[Dynomite]

I am looking for a couple Starter Solenoid Connectors just in case anyone has a non-repairable Starter.
I have a couple of broken Starter Solenoid Connectors.

https://cimg5.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/400x400/80-f1a70ebd_2655_437e_b2b6_ffb1e61ffd99_cefd3f4696a42 4f7ebd692d9a64fd0a3623b1a48.jpeghttps://cimg2.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/400x400/80-ceae9b8a_893e_4903_ab84_385aaa9df830_1aa1b84ea9e87 751bc2b3c30a86d66fd0c455bfe.jpeg

The Solenoid Connector can be disconnecting from the copper connector with a solder iron as shown.
The Solenoid Connector can then be tapped out using a flat screwdriver and hammer from inside.

The connector shown in first photo below was removed incorrectly by prying on the outside breaking
the plastic part inserted into the hole "so the tab that was soldered is not showing in first photo below".

https://cimg7.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/400x400/80-1d485024_218c_43e7_85d4_da7ea1c6ebf0_112f8f909db90 5d3e0e09365ad99a8291b9d297b.jpeghttps://cimg9.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/400x400/80-d6fe2cb1_6cc1_4c91_a221_ccbfe8e45e35_c83a861cb08b6 5bfb9d5fdaba807eb63a9b16980.jpeg

[secondchance]

Hey Cliff,

Can the plastic housing glued back together? There are some incredible adhesives these days.
I have never dealt with these guys but looks like they carry extensive starter parts for all starters including nippon Denso.

https://www.amscovf.com/NIPPONDENSO-STARTER-PARTS_c_32853.html

[Dynomite]

Hey Cliff,

Can the plastic housing glued back together? There are some incredible adhesives these days.
I have never dealt with these guys but looks like they carry extensive starter parts for all starters including nippon Denso.

https://www.amscovf.com/NIPPONDENSO-STARTER-PARTS_c_32853.html

That is a excellent find for starter parts :thumbsup:

I did not find the connector however and the connectors were broken and the broken piece lost. I was hoping someone could find those connectors at a site such as you mention or.....know of a starter non salvageable from which parts can be removed :thumbsup: