PDA

View Full Version : wtb 18" fiske wheels for 95zr-1


viper107
09-28-2020, 12:14 PM
anybody have a set? the m-5 ones

G8nightman
09-28-2020, 02:23 PM
18's are hard to come by used and I think you mean FM5's

viper107
09-28-2020, 02:31 PM
yes thats it, guess il have to hold my breath and order some

G8nightman
09-28-2020, 03:05 PM
Probably run you 5k with tires

91vettezr1
09-28-2020, 03:31 PM
18's are hard to come by used and I think you mean FM5's

https://www.ebay.com/itm/Fikse-Forged-19-wheels-for-Corvette-Camaro-BMW/224146456713?hash=item34302b8089:g:x8YAAOSwkY9fU-p-


dirt cheap for those wheels. they run $1000 a piece.

G8nightman
09-28-2020, 03:53 PM
https://www.ebay.com/itm/Fikse-Forged-19-wheels-for-Corvette-Camaro-BMW/224146456713?hash=item34302b8089:g:x8YAAOSwkY9fU-p-


dirt cheap for those wheels. they run $1000 a piece.

Nice but not perfect fit for a Z

91vettezr1
09-28-2020, 03:57 PM
Nice but not perfect fit for a Z

i got lucky and found the correct zr-1 offset on ebay for set of fikse, $900 for the pair, had to order the fronts new at $950 a piece.

Anniv88
09-29-2020, 06:57 PM
I would think twice about getting 18's for the rear.
Not a big selection of tires in the size you will need.

viper107
09-30-2020, 10:50 AM
thanks

viper107
09-30-2020, 10:51 AM
so in a 19 for the rear, what would be the set up, 18 front, 19 rear? tire sizes

Jagdpanzer
10-01-2020, 09:59 AM
I'm running 18's on the front and 19's on back. Went with the 19's due to better selection of top rated tires.


Sent from my iPhone using ZR-1 Net Registry (http://r.tapatalk.com/byo?rid=90383)

viper107
10-01-2020, 11:03 AM
what tire sizes you running?

Jagdpanzer
10-01-2020, 11:56 AM
325/30


Sent from my iPhone using ZR-1 Net Registry (http://r.tapatalk.com/byo?rid=90383)

viper107
10-01-2020, 12:47 PM
thanks

Top Toy
10-01-2020, 08:58 PM
FWIW, I just put new tires on my 18" rears. Pirelli P Zero. 335/30 ZR18. Really like them. Also had a set of 325/30 ZR18 Michelin Pilot Sports but the fronts (275) were too narrow for my wheels so swapped them on the Pirelli's (put 295's on the front). No regrets.

Sent from my SM-G975U1 using ZR-1 Net Registry mobile app (http://r.tapatalk.com/byo?rid=90383)

Z51JEFF
10-01-2020, 11:32 PM
When looking for front tires might want to look at a 265/40,a little taller than the 275/35 and almost exactly the same width.

JimZRyd
10-07-2020, 10:29 PM
I went with the Fikse Profil 5?s in 18x10f and 19x12r. Tires are Pilot Super Sports, 285/35?s in front and 345/30?s in back. I?m on coilovers and there was really only minimal trimming of the rear inner fender liner to eliminate any rub. Much better selection of tires in the 18 and 19 inch sizes.

Jim

indy91zr1
10-08-2020, 07:47 PM
I went with the Fikse Profil 5?s in 18x10f and 19x12r. Tires are Pilot Super Sports, 285/35?s in front and 345/30?s in back. I?m on coilovers and there was really only minimal trimming of the rear inner fender liner to eliminate any rub. Much better selection of tires in the 18 and 19 inch sizes.

Jim

If I may ask, do you happen to know the offsets you are running on them?

Thanks

JimZRyd
10-11-2020, 03:33 PM
If I may ask, do you happen to know the offsets you are running on them?

Thanks

Let me find the folder I put all my records in and I?ll get back to you👍🏻

indy91zr1
10-11-2020, 04:07 PM
Sounds great thank you.

JimZRyd
10-11-2020, 06:08 PM
Sounds great thank you.

Found my original paperwork. The offsets for the wheels isn?t listed. Sorry.

Jagdpanzer
10-11-2020, 07:42 PM
Here are the offsets for my 18"/19" Fikse wheels:
Fronts - 18" x 10" with 57mm offset
Rears - 19" x 12" with 38mm offset


Sent from my iPhone using ZR-1 Net Registry (http://r.tapatalk.com/byo?rid=90383)

indy91zr1
10-11-2020, 10:22 PM
Found my original paperwork. The offsets for the wheels isn?t listed. Sorry.

Not a problem. Thank you for checking.

indy91zr1
10-11-2020, 10:25 PM
Here are the offsets for my 18"/19" Fikse wheels:
Fronts - 18" x 10" with 57mm offset
Rears - 19" x 12" with 38mm offset


Sent from my iPhone using ZR-1 Net Registry (http://r.tapatalk.com/byo?rid=90383)
Awesome. Thank you. I have been trying to figure out what offset I would need to run on the front as I want to do 11?s all around and not have them poke to much outside front fender.