415 build numbers?

[CamP]

I just purchased the 415 that was owned by Joel Corbitt. We were talking about how many 415 crankshafts were made by Sonny Bryant and Joel thought it was about 30. I heard Lingenfelter used Bryant cranks on their 415 builds and I know Aaron Scott used them as well. Just wondering how many of these engines are out there?

[Paul Workman]

I know that Pete Polatsidis and Marc Haibeck built some 427 and 441s which (I believe) used the Bryant cranks. (Mebby they can chime in here....).

[Young1]

I talked with Bob Haibeck two days ago and he is currently having cranks fabbed by Moldex.

[Top Toy]

I talked with Bob Haibeck two days ago and he is currently having cranks fabbed by Moldex.Saw one of those Moldex cranks at Marc's. A work of art!

Sent from my SM-G975U1 using ZR-1 Net Registry mobile app (http://r.tapatalk.com/byo?rid=90383)

[tf95ZR1]

How much $ for a Moldex crank?

[Paul Workman]

:happy1:How much $ for a Moldex crank?

[Subfixer]

You could ask them directly,
https://moldexcrankshaft.com/

Or email Marc.

[Polo-1]

over ten years ago it was around $3k. That was on the bottom end, no knife edging or finish balancing.

[CamP]

Joel said his finished Bryant 415 crank was $5k.

[A26B]

That?s what I recall too (for my 415 Bryant crank)


Sent from my iPhone using ZR-1 Net Registry (http://r.tapatalk.com/byo?rid=90383)

[tpepmeie]

Same


Sent from my iPhone using ZR-1 Net Registry (http://r.tapatalk.com/byo?rid=90383)