Shot in the dark. Anyone have their radio bezel out in a 90-93 right now? Need a pic

[Corvette95]

I know it is a long shot, but if anyone has their radio bezel off I need a picture of the right side of the radio area where the metal clip on the right side of the radio bezel clips into. I believe my receiving tab is broken/missing. My other cars are 94 and later dashes. Mine is a 90, 90-93 should be same mount.

[secondchance]

I know it is a long shot, but if anyone has their radio bezel off I need a picture of the right side of the radio area where the metal clip on the right side of the radio bezel clips into. I believe my receiving tab is broken/missing. My other cars are 94 and later dashes. Mine is a 90, 90-93 should be same mount.

https://www.google.com/search?q=1993+corvette+behind+radio+bezel&client=safari&hl=en-us&prmd=sivn&source=lnms&tbm=isch&sa=X&ved=2ahUKEwiqobnC9vDqAhWrlHIEHXXUAUIQ_AUoAnoECAoQA g&biw=1024&bih=666#imgrc=cCNEXLXVdbr1EM

Above image, unfortunately, is for later cars. However, my 91 had steel metal clip on the right. Often these clips fall off when bezel is removed and failed to be put back on while reassembling

[Corvette95]

Thanks for the post. I have a bezel, I am trying to see if the square slot the metal bezel tab fits in is part of the dash frame support . I had to make a tab for the passenger side console cover (for the 7mm screw) - the plastic and carpet piece. The receiver may have been broken off prior. I will plastic weld one back like factory. Thanks!