Wheel well fasterners

[Jetjock]

Anybody have a line on how to get fasteners for the inner fenders? I have some wrong and missing screws and I want to replace them. Also, any way to restore the plastic wheel wells?


Roy

[Paul Workman]

Jason at Vette2Vette (https://www.vette2vette.com/)would be a place to check on wheel well panels AND screws as well.
As for general fasteners including screws, MicMaster-Car (https://www.mcmaster.com/) has an on-line catalog which is extensive.
Also, Eklers Corvette (https://www.ecklerscorvette.com/) or MidAmerica Motorworks.com (https://www.mamotorworks.com/) may also have fender well screws.

Good luck!

[dredgeguy]

At Mirrock you can buy a 20 lbs bag of assorted screws, nuts/bolts for the C4 for cheap. Give Mark a call and I am sure he will have what you need. He had the bag of assorted screws at Carlisle last year and if you just want specific screws sure he will have them for you. Just another reason to attend Carlisle this year!

[Jagdpanzer]

Agree with Charlie
Mirrock is a great source for C4 stuff.
I bought one their 20 lbs box of screws and there were plenty of wheel well liner SS retaining torx head screws.


Sent from my iPhone using ZR-1 Net Registry (http://r.tapatalk.com/byo?rid=90383)

[Flyman 27]

From Mirrock, I purchased a 20 pound box of C4 fasteners for $40. One of my best purchasers ever, really comes in handy.
For the wheel well liners, I lightly sanded them with fine paper, then sprayed them with Krylon satin black for plastic. Have looked great for over a year now.

[Paul Workman]

From Mirrock, I purchased a 20 pound box of C4 fasteners for $40. One of my best purchasers ever, really comes in handy.
For the wheel well liners, I lightly sanded them with fine paper, then sprayed them with Krylon satin black for plastic. Have looked great for over a year now.

Ah! Good to know on BOTH counts! Mirrock AND the Krylon restoration info!=D>

[Young1]

Mirrock is a great vendor of parts and info. If it?s broke or missing ask Mark.