NEW Fuel Pressure Regulator coming very soon!

[A26B]

We are pretty excited about this and couldn't wait until everything was ready to ship before spilling the beans.

Jerrys Gaskets has developed a brand new, direct replacement, Fuel Pressure Regulator for the LT5. It is based on the Lingenfelter and Wasinger modifications to the original regulator.

Instead of trying to utilize the original regulator body and deal with core exchanges and small run delays, we chose to make the "body" all new, from billet aluminum. It will utilize the proven 3.5bar/350kPa regulator. We will also have available, 4.0bar/400kPa regulators. Regulators will come with Viton o-ring seals and nitrile diaphram for compatibility with ethanol blended gasoline fuel.

Each Fuel Pressure Regulator will come fully assembled, with a complete set of Viton o-ring seals for the fuel rail/regulator piping and fuel feed & return block.

We hope you like it!

Pre-anodized regulator body, inside view
https://cdn10.bigcommerce.com/s-nkg90o/products/486/images/2754/HPT_ApprovalSample-C4x6__68960.1589996201.1280.1280.jpg?c=2

Anodized regulator assembly
https://cdn10.bigcommerce.com/s-nkg90o/products/486/images/2752/IMG_0968__04634.1589992235.1280.1280.jpg?c=2

[secondchance]

this is very cool!
It's people like you and Wasinger and stuff like this that allows me to be excited about our ZR-1s despite the fact that I have been driving these cars since 1991 - 29 years!

Thanks Jerry & Phil!

[lfalzarano]

That is a fantastic job!


Sent from my iPhone using ZR-1 Net Registry (http://r.tapatalk.com/byo?rid=90383)

[Ccmano]

We, the ZR-1 community, are so lucky to someone like you Jerry! :handshak: Thank you so much for your support that goes above and beyond.
H
:cheers:

[PhillipsLT5]

Another GREAT job! Think about how many of these cars would not be running without Jerry & the rest of the ZR-1 community

[conesare2seconds]

Thanks! :fahne:

[BlackZR1]

Thanks Jerry and Phil.
Chamfers all over give it a pro appearance.

[Jitse]

Nice , I am going to put it on my list for the next order!

[DRM500RUBYZR-1]

Well Done!!!
Your efforts are very much appreciated.
The result; Fantastic!
Thank you!
:cheers:
Marty

[A26B]

I had help along the way....
Phil Wasinger- instigator extraordinaire
Graham Behan-Lingenfelter original specs
Corey Henderson- engineering, CAD, CNC, testing & awesomeness
Keeping the ZR-1 alive and well has always been a group effort. It’s an amazing group of special people.


Sent from my iPhone using ZR-1 Net Registry (http://r.tapatalk.com/byo?rid=90383)

[EvanZR1]

Awesome news, great job!

[ZWILD1]

That is really awesome. I was lucky that the last time I needed one back in 2008 they were still available. I wish someone would reproduce the original LT5 plug wires. My car has a nice set but they won't last forever.

[RussMcB]

I had help along the way....
Phil Wasinger- instigator extraordinaire
Graham Behan-Lingenfelter original specs
Corey Henderson- engineering, CAD, CNC, testing & awesomeness
Keeping the ZR-1 alive and well has always been a group effort. It’s an amazing group of special people[/url]Thank you, Jerry and gang!

[jss06c6]

Phil, Jerry, Graham, Corey... fabulous work. Very, very much appreciated!

Sent from my SM-G950U using ZR-1 Net Registry mobile app (http://r.tapatalk.com/byo?rid=90383)

[Pete]

I had help along the way....
Phil Wasinger- instigator extraordinaire
Graham Behan-Lingenfelter original specs
Corey Henderson- engineering, CAD, CNC, testing & awesomeness
Keeping the ZR-1 alive and well has always been a group effort. It’s an amazing group of special people.


Sent from my iPhone using ZR-1 Net Registry (http://r.tapatalk.com/byo?rid=90383)

Nice looking piece of art.
Great job guys :thumbsup:

Pete

[Paul Workman]

I had help along the way....
Phil Wasinger- instigator extraordinaire
Graham Behan-Lingenfelter original specs
Corey Henderson- engineering, CAD, CNC, testing & awesomeness
Keeping the ZR-1 alive and well has always been a group effort. It’s an amazing group of special people.


Sent from my iPhone using ZR-1 Net Registry (http://r.tapatalk.com/byo?rid=90383)

A-MEN!!!

I'll be adding one to my spare parts bin @ first opp!

[daniels]

Amazing work! I will surely be ordering one soon

[Top Toy]

Another class act by the ZR-1 community! Worth it just for the appearance upgrade. Long live the King!

Sent from my SM-G975U1 using ZR-1 Net Registry mobile app (http://r.tapatalk.com/byo?rid=90383)