LT5 Miscellaneous Parts

[Ccmano]

LT5 Parts
Great parts still available, feel free to make an offer. I am finalizing the parting out of a 1990 LT5 engine. Only these miscellaneous parts remain. The engine was in storage for the past few years that I am aware of. Not sure exactly how long. It reportedly had ~35k miles when removed. All the remaining parts I have available now are listed here. Im open to offers on everything especially multiple items. Prices listed do not include shipping. PM to make offers. Payment via PayPal only. The whole lot is available for a significant discount.
H

Injector Housing bolt set. $25
Throttle body bolt set $25
Fuel Pressure regulator vacuum line $15
MAP Sensor with plenum bracket $55
MDPS Sensor with the ECM bracket $55
Secondary throttle plate arms, washers, nuts set $79
Secondary linkages and mounting brackets with bolts $65
AC compressor, functional, no clutch $129
IAC Motor $25
Intake air temp sensor $25
Both under plenum [B]water temp sensors $35
Drive shaft with the yoke attached $149
Cam cover vent lines 1 driver side available $20 ea.
2 Flywheel bolt sets $39 ea
2 New Knock Modules (90 only) $99 ea.
Power steering bracket with bolts $39
Water pump pulley with screws $39
Right and left engine mount brackets with bolts $70
Vacuum line keeper with bolts, mounts to PS reservoir $35
1 set ground bolts to top of bellhousing $25
1 set Bell housing mounting bolts $39
1 set DIS Module mounting bolts $20
Oil filter housing $150
1 set oil filter housing mounting bolts $20
1 set starter mounting bolts $20
2 Alternator brackets $25 ea.
Engine Wiring Harness Loom $20



https://farm66.staticflickr.com/65535/48762612837_6d4fb9e46f_c.jpg (https://flic.kr/p/2hhZ8W6)

https://farm66.staticflickr.com/65535/48762424766_c9af3d43e2_c.jpg (https://flic.kr/p/2hhYb2u)

https://farm66.staticflickr.com/65535/48762107388_ec9bf9f751_c.jpg (https://flic.kr/p/2hhWxFs)

https://farm66.staticflickr.com/65535/48762424656_ccfd0c1977_c.jpg (https://flic.kr/p/2hhYaZA)

[Ccmano]

https://farm66.staticflickr.com/65535/49757436148_424f8e0ee6_c.jpg (https://flic.kr/p/2iNTSf9)

https://farm66.staticflickr.com/65535/49757963951_7151b879b1_c.jpg (https://flic.kr/p/2iNWz9c)

https://farm66.staticflickr.com/65535/50095521231_240cf49649_c.jpg (https://flic.kr/p/2jjLDai)

https://farm66.staticflickr.com/65535/50095521201_a00cd3d63c_c.jpg (https://flic.kr/p/2jjLD9M)

https://farm66.staticflickr.com/65535/50094938423_1aa61a8bd4_c.jpg (https://flic.kr/p/2jjHDUT)

[Ccmano]

https://farm66.staticflickr.com/65535/49713597743_5d12f97fac_c.jpg (https://flic.kr/p/2iK2bBz)

https://farm66.staticflickr.com/65535/49713597698_91c2629891_c.jpg (https://flic.kr/p/2iK2bAN)

https://farm66.staticflickr.com/65535/49714454447_feae862478_c.jpg (https://flic.kr/p/2iK6zhk)

https://farm66.staticflickr.com/65535/49713583443_e361f832fd_c.jpg (https://flic.kr/p/2iK27n2)

[Ccmano]

Hold for pix

[spork2367]

Do you have the two screws that hold the MAP bracket on to the plenum?

[G8nightman]

Can you do metal distribution pipe for 100 shipped?


Sent from my iPhone using ZR-1 Net Registry (http://r.tapatalk.com/byo?rid=90383)

[Ccmano]

Can you do metal distribution pipe for 100 shipped?


Sent from my iPhone using ZR-1 Net Registry (http://r.tapatalk.com/byo?rid=90383)

Just want to be clear, your referring it the coolant pipe, correct?
H

https://farm66.staticflickr.com/65535/48762424056_045d8349cf_c.jpg (https://flic.kr/p/2hhYaPf)

[G8nightman]

Correct.


Sent from my iPhone using ZR-1 Net Registry (http://r.tapatalk.com/byo?rid=90383)

[Ccmano]

Do you have the two screws that hold the MAP bracket on to the plenum?

Sorry, I don’t have those...
H
:cheers:

[XfireZ51]

Hans,

Any chance u have the mounting bracket for the throttle cable? I may be interested in the passenger side cam cover vent tube.

[Ccmano]

Hans,

Any chance u have the mounting bracket for the throttle cable? I may be interested in the passenger side cam cover vent tube.

Dom,

Are you referring to these?

https://farm66.staticflickr.com/65535/49713597743_5d12f97fac_c.jpg (https://flic.kr/p/2iK2bBz)

https://farm66.staticflickr.com/65535/48762622892_e9977c7e99_c.jpg (https://flic.kr/p/2hhZbVs)

[XfireZ51]

Yes to the top, no for the second. Its the bracketing that holds the throttle shield and the throttle cam mechanism.

[Ccmano]

Yes to the top, no for the second. Its the bracketing that holds the throttle shield and the throttle cam mechanism.

I see. No don’t have one of those. Its usually part of the throttle body.
PM and we can arrange the vent line.
H

[Ccmano]

Thank you Chris....
H
:cheers:

[Rhodesjd]

Do you still have fuel injection clips? Tx me 2564906059

[32valvZ]

PM sent Hans

[Ccmano]

Thank you to Jeff and John!
H

[RUSSELL]

is the intake accordion connection still available

[Ccmano]

is the intake accordion connection still available

PM sent...
H

[Ccmano]

Thank you Scott and Russell
H
:cheers:

[Ccmano]

Make an offer, one or all items.
H
:cheers:

[Rhodesjd]

Do you still have power steering pulley? Tx me at 2564906059. Thx Jerry

[Corvette95]

Interested in the plenum pcv tubes, also like the driver side front cam vent pipe (plenum pcv drivers ad passenger pipes , stock good 90 emissions canister and solenoid,
Push pins for secondary injector driver module mounting ? Also a picture of the driver rear engine wiring harness including which cable (cruise I think)!goes into the large I bracket attached to the brake master cylinder. I


Sent from my iPhone using ZR-1 Net Registry (http://r.tapatalk.com/byo?rid=90383)

[Ccmano]

Interested in the plenum pcv tubes, also like the driver side front cam vent pipe (plenum pcv drivers ad passenger pipes , stock good 90 emissions canister and solenoid,
Push pins for secondary injector driver module mounting ? Also a picture of the driver rear engine wiring harness including which cable (cruise I think)!goes into the large I bracket attached to the brake master cylinder. I


Sent from my iPhone using ZR-1 Net Registry (http://r.tapatalk.com/byo?rid=90383)

PM sent...
H
:cheers:

[G8nightman]

Hi ccmano do you happen to have the passenger side coolant pipe that goes on the side of the plenum? By the way your inbox is full.


Sent from my iPhone using ZR-1 Net Registry (http://r.tapatalk.com/byo?rid=90383)

[Ccmano]

Hi ccmano do you happen to have the passenger side coolant pipe that goes on the side of the plenum? By the way your inbox is full.


Sent from my iPhone using ZR-1 Net Registry (http://r.tapatalk.com/byo?rid=90383)

Sorry about that, Ive been away. I dont have the coolant pipe your looking for.
H
:cheers:

[Joelbbvette]

Any chance of a list of what's left? Help the lazy? :-)
Joel

[Ccmano]

Any chance of a list of what's left? Help the lazy? :-)
Joel

What is currently listed at the top of this thread is what is left and is up to date.

H
:cheers:

[Ccmano]

Pressure Plate bolts Sold...
Thank you
Shizap
H
:cheers:

[Corvette95]

Thank you Scott and Russell

H

:cheers:



Interested in cam vent lines but need to double check visually, I believe I need both sides (cosmetic need). Will post pic to verify correct by tomorrow. Still looking for good RF ABS harness and speed sensor with hub and ?limited slip differential orange tag from rear pumpkin.


Sent from my iPhone using ZR-1 Net Registry (http://r.tapatalk.com/byo?rid=90383)

[Ccmano]

Interested in cam vent lines but need to double check visually, I believe I need both sides (cosmetic need). Will post pic to verify correct by tomorrow. Still looking for good RF ABS harness and speed sensor with hub and ?limited slip differential orange tag from rear pumpkin.


Sent from my iPhone using ZR-1 Net Registry (http://r.tapatalk.com/byo?rid=90383)

Just checked, this is the only one I have left...
H

https://farm66.staticflickr.com/65535/51967506278_601e9a5970_c.jpg (https://flic.kr/p/2nbc46y)