PDA

View Full Version : ECM options

Clean87TA
03-11-2020, 10:18 PM
Finally had some free time.. y’all think this would work? For the 411 ls1 ecm?
XfireZ51
03-12-2020, 01:45 PM
Even at $1k, a stock ECM would be a better, simpler solution unless ur considering FI or something exotic.
RussMcB
03-12-2020, 02:06 PM
What the heck is that yellow thing?!
Clean87TA
03-12-2020, 03:19 PM
Even at $1k, a stock ECM would be a better, simpler solution unless ur considering FI or something exotic.

If I could even find a stock ECM.. I got spare parts it’s worth giving a shot if not MS3 set will do it
Clean87TA
03-12-2020, 03:21 PM
What the heck is that yellow thing?!

It’s my Turbo Camaro
-=Jeff=-
03-12-2020, 03:30 PM
If I could even find a stock ECM.. I got spare parts it’s worth giving a shot if not MS3 set will do it

They are around.. I know someone with a few
BigJohn
03-12-2020, 04:42 PM
It’s my Turbo Camaro


Cool I love it 😍
grahambehan
03-12-2020, 07:08 PM
Ok, I'll say it, I don't fully understand this thread.
The 24 x reluctor wheel may work at the edge of the dampener. Ms3 will work with the stock 9x tho. So why?

Graham
-=Jeff=-
03-12-2020, 09:11 PM
Ok, I'll say it, I don't fully understand this thread.
The 24 x reluctor wheel may work at the edge of the dampener. Ms3 will work with the stock 9x tho. So why?

Graham

I believe the OP has a LT5 but did not get an ECM or maybe even a harness for that matter
grahambehan
03-12-2020, 09:23 PM
0k, my statement still stands ,as to crank trigger input, regardless of harness. The megasuirt ecu will accept either input, 9x or 24x.

Graham
Clean87TA
03-12-2020, 09:30 PM
0k, my statement still stands ,as to crank trigger input, regardless of harness. The megasuirt ecu will accept either input, 9x or 24x.

Graham

As stated I have extra Ls parts laying around.. so why not.
grahambehan
03-12-2020, 09:39 PM
Ok , just asking trigger wheel options with megasquirt, however you wish to do it is fine.

Graham