PDA

View Full Version : Gauging Interest - Reproducing License Plate Bracket

Jagdpanzer
09-21-2019, 05:09 PM
I’m considering making the mold tooling for reproducing our license plate bracket and would like to get a sense for how many members would be interested in one.


Sent from my iPhone using ZR-1 Net Registry (http://r.tapatalk.com/byo?rid=90383)
doctorjay61
09-21-2019, 05:43 PM
I’m considering making the mold tooling for reproducing our license plate bracket and would like to get a sense for how many members would be interested in one.


Sent from my iPhone using ZR-1 Net Registry (http://r.tapatalk.com/byo?rid=90383)I would be interested. Thank you.

Sent from my SM-G950U using ZR-1 Net Registry mobile app (http://r.tapatalk.com/byo?rid=90383)
S.hafsmo
09-21-2019, 06:41 PM
This is the rear plate I requested earlier? If so, I'm in for one.
Jagdpanzer
09-21-2019, 06:51 PM
Yes, this would be for the rear.


Sent from my iPhone using ZR-1 Net Registry (http://r.tapatalk.com/byo?rid=90383)
efnfast
09-22-2019, 08:37 AM
Plastic Phil?
Jagdpanzer
09-22-2019, 09:22 AM
Yes, urethane plastic
efnfast
10-05-2019, 08:42 AM
I'd take one.
XfireZ51
10-05-2019, 11:00 AM
Phil,

Any chance u could 3D print the radio console bezel?
Jagdpanzer
10-05-2019, 01:15 PM
If I had a 3D printer I would give it a try. Smaller ones have become quite affordable so I may look into it.


Sent from my iPhone using ZR-1 Net Registry (http://r.tapatalk.com/byo?rid=90383)
Buckley
12-21-2019, 07:52 PM
Hi, I would be interested as well
Jagdpanzer
12-21-2019, 10:07 PM
I would need to make at least 10 of these to justify the effort to make the mold tooling.


Sent from my iPhone using ZR-1 Net Registry (http://r.tapatalk.com/byo?rid=90383)
2ljd
12-23-2019, 02:41 PM
Sign me up for one!
S.hafsmo
12-23-2019, 03:21 PM
I'd be surprised if you'd struggle getting rid of 10 pieces. Everywhere I've requested these, I've been told they are in high demand these days, and very hard to come by. I stille haven't found a single one.
Jagdpanzer
12-23-2019, 03:36 PM
OK guys
I will proceed with the project
It’ll be a few weeks to produce the molds. It takes two of them.


Sent from my iPhone using ZR-1 Net Registry (http://r.tapatalk.com/byo?rid=90383)
mamasood@kfupm.edu.sa
04-07-2020, 03:35 PM
This is the rear plate I requested earlier? If so, I'm in for one.