PDA

View Full Version : Emblem question

ALLTHECAMS
08-07-2019, 10:25 PM
Are the side emblems the same size as the rear?
Thanks
Matt

Sent from my XT1710-02 using Tapatalk
DRM500RUBYZR-1
08-08-2019, 06:24 AM
Yes, same.
Marty
ALLTHECAMS
08-08-2019, 11:30 AM
Anyone know the measurements for placement?
Thanks
Matt

Sent from my XT1710-02 using Tapatalk
DRM500RUBYZR-1
08-08-2019, 11:35 AM
5 and 3/4 from the rear edge.
1 and 7/8 from the bottom edge.
Marty
ZWILD1
08-09-2019, 06:18 PM
I never cared for putting the hood emblems on the 90 and 91 cars. With my first 91 I resisted the temptation. But now with my current car I find myself in a bit of a dilemma. One of the previous owners added just one to the left driver side. Not sure of the story on this. Whether he could only find one and so installed just the one. But there you have it. I have been looking for another Turquoise Metallic 42U to go on the right side. I recently had the car paint corrected and asked the guy doing the work what he thought about possibly removing it. He said better off to leave it as if it has been on the car long enough it might leave an outline if removed.
ALLTHECAMS
08-09-2019, 06:44 PM
Got them installed. I chose not to drill holes in my hood and ground off the pegs with a Dremel.
Matt10194

Sent from my XT1710-02 using Tapatalk
-=Jeff=-
08-09-2019, 09:43 PM
I have the LT5 emblems on the hood of my 1990
DRM500RUBYZR-1
08-10-2019, 06:36 AM
Got them installed. I chose not to drill holes in my hood and ground off the pegs with a Dremel.
Matt10194

Sent from my XT1710-02 using Tapatalk

Looks GREAT! ( and "'finished")
Marty