FS: 1990 ZR-1 LT5 Engine Part Out

[Ccmano]

Great parts still available, feel free to make an offer. I am in the process of parting out a 1990 LT5 engine and trans. It has been in storage for the past few years that I am aware of. Not sure exactly how long. Parts I have available now are listed here. I will also send you a photo when you pm me so you can see what your getting before we finalize the transaction. I'm open to offers on everything especially multiple items. Prices listed do not include shipping. PM to make offers. Payment via PayPal only. Photos are throughout the thread, scroll down
H


Here's what's left.... as of 4/3/2023
Half price if you want it all or make offer.

*Injector Housing bolt set. $25
*Throttle body bolt set $25
*MAP Sensor with plenum bracket $55
*Secondary throttle plate arms, washers, nuts set $79
*Secondary linkages and mounting brackets with bolts $65
*AC compressor, functional, no clutch $129
*IAC Motor $25
*Intake air temp sensor $25
*[B]Both under plenum water temp sensors $35
*Drive shaft with the yoke attached $149
*Cam cover vent line 1 driver side available $20 ea.
*2 Flywheel bolt sets $39 ea
*2 New Knock Modules (90 only) $99 ea.
*Power steering bracket with bolts $39
*Right and left engine mount brackets with bolts $70
*Vacuum line keeper with bolts, mounts to PS reservoir $35
*1 set ground bolts to top of bellhousing $25
*1 set Bell housing mounting bolts $39
*1 set DIS Module mounting bolts $20
*1 set oil filter housing mounting bolts $20
*Engine Wiring Harness Loom $20
*Bell housing inspection cover $20
*transmission exhaust system hanger $20
*Clutch fork and pivot $50
*1 set fuel injector clips $10

H

https://farm66.staticflickr.com/65535/48762106688_3d5e76bdd1_c.jpg (https://flic.kr/p/2hhWxto)

https://farm66.staticflickr.com/65535/48762423956_fecc4a5ef1_c.jpg (https://flic.kr/p/2hhYaMw)

https://farm66.staticflickr.com/65535/48762106998_79de01c6e7_c.jpg (https://flic.kr/p/2hhWxyJ)

https://farm66.staticflickr.com/65535/48762106763_f4c48cd9b8_c.jpg (https://flic.kr/p/2hhWxuF)

https://farm66.staticflickr.com/65535/48762424056_045d8349cf_c.jpg (https://flic.kr/p/2hhYaPf)

https://farm66.staticflickr.com/65535/48762107118_e5b418cd6b_c.jpg (https://flic.kr/p/2hhWxAN)

https://farm66.staticflickr.com/65535/48762107278_2917bdef18_c.jpg (https://flic.kr/p/2hhWxDy)

https://farm66.staticflickr.com/65535/48762612557_b7deb7615c_c.jpg (https://flic.kr/p/2hhZ8Rg)

[billschroeder5842]

Unless I missed it, do you have a Fuel Pressure regulator or the ECM plastic cover for the wiring harness??

[Pete]

Do u have air filter housing cover?

Pete

[Ccmano]

Do u have air filter housing cover?

Pete

Sorry Pete don’t have that.
H
:cheers:

[-=Jeff=-]

Do u have air filter housing cover?

Pete

you mean the lid that bolts on? I need to look in my stuff I might

Hans,

was this 1990 a C60 or C68? that might matter for the AC portion of the harness

[-=Jeff=-]

Fuel rail with pressure regulator $399

Unless I missed it, do you have a Fuel Pressure regulator or the ECM plastic cover for the wiring harness??

He has the Pressure regulator with fuel rails

[Ccmano]

you mean the lid that bolts on? I need to look in my stuff I might

Hans,

was this 1990 a C60 or C68? that might matter for the AC portion of the harness

That’s a good point, I really don’t know, since I only bought the engine/trans. With so few C60, Manual Air, cars made it’s most likely a C68. Also a mute point as the harness is sold.
H
:cheers:

[Ccmano]

https://farm66.staticflickr.com/65535/48762622892_e9977c7e99_c.jpg (https://flic.kr/p/2hhZbVs)

https://farm66.staticflickr.com/65535/48762107588_f9a9191f89_c.jpg (https://flic.kr/p/2hhWxJU)

https://farm66.staticflickr.com/65535/48762612837_6d4fb9e46f_c.jpg (https://flic.kr/p/2hhZ8W6)

https://farm66.staticflickr.com/65535/48762424766_c9af3d43e2_c.jpg (https://flic.kr/p/2hhYb2u)

https://farm66.staticflickr.com/65535/48762107388_ec9bf9f751_c.jpg (https://flic.kr/p/2hhWxFs)

https://farm66.staticflickr.com/65535/48762424656_ccfd0c1977_c.jpg (https://flic.kr/p/2hhYaZA)

[Ccmano]

https://farm66.staticflickr.com/65535/48762107368_4cb26aef8d_c.jpg (https://flic.kr/p/2hhWxF7)

https://farm66.staticflickr.com/65535/48762107338_e826fab6e3_c.jpg (https://flic.kr/p/2hhWxEA)

https://farm66.staticflickr.com/65535/48762612582_51995a2b41_c.jpg (https://flic.kr/p/2hhZ8RG)

https://farm66.staticflickr.com/65535/48762107193_ae9efc0850_c.jpg (https://flic.kr/p/2hhWxC6)

https://farm66.staticflickr.com/65535/48762423956_fecc4a5ef1_c.jpg (https://flic.kr/p/2hhYaMw)

[Ccmano]

Space for pix...

[Ccmano]

Saved for pix...

[-=Jeff=-]

http://a65.tinypic.com/2rh6zd0.jpg


How much for this one? I need it as mine has a broken tab

[dredgeguy]

Hans, are you going to Carlisle?

[Ccmano]

Hans, are you going to Carlisle?

Not going to be able to make it this year Charlie.
H
:cheers:

[Ccmano]

Sold

[-=Jeff=-]

http://a66.tinypic.com/357kck6.jpg
http://a67.tinypic.com/1z2q0dd.jpg

How much for these.

[Ccmano]

$35 for the two plenum fittings. $25 each for the coolant lines. $75 plus shipping if you want them all.
H


Sent from my iPhone using ZR-1 Net Registry (http://r.tapatalk.com/byo?rid=90383)

[Joelbbvette]

PM sent.

[-=Jeff=-]

I will take the fittings for $35

[Ccmano]

I will take the fittings for $35

Just add $7.50 for Priority Mail, you know my PayPal by now. I could have thrown them in the last batch I sent you had I known.
H
:cheers:

[-=Jeff=-]

I will take care of it Monday.. not at home and limited internet currently

[GOLDCYLON]

Lots of nice parts Hans ! Are the coolant pipes free of dents if so sold !

[GOLDCYLON]

Payment sent Thanks Hans! GC :cheers:

[Ccmano]

Updated for sold and additional items.
H
:cheers:

[Ccmano]

Updated for sold and additional items again.
H
:cheers:

[SitkaSam]

Interested in exhaust system.. is the GM number on the muffler
LH 12509997 and RH 12509998?
Also looking for origional AC air filter and ZR1 black & white gas cap
Thanks!
John
will consider trading a new BB Stainless Cat back system...less than 1,000 miles, shines like new

[Dynomite]

I ship dipsticks in tubes :thumbsup:

[Ccmano]

I ship dipsticks in tubes :thumbsup:

Thanks for the purchase Cliff, tubes it is.
H
:cheers:

[Ccmano]

Updated...feel free to make offers
H
: cheers:

[Ccmano]

Thank you for the purchase Dimitri.
H
:cheers:

[Ccmano]

Thank you for the purchase Joel.
H
:cheers:

[Ccmano]

Lots of great parts are still available. Don’t be afraid to make an offer, I might just say yes.
H
:cheers:

[Corvettes White]

Thank you for the fuel rails, Hans. They are ready to bolt on. Aside, your son works a mile from my project. Worked out perfectly!
George.

[Ccmano]

Thank you for the fuel rails, Hans. They are ready to bolt on. Aside, your son works a mile from my project. Worked out perfectly!
George.

Thanks for your purchase George, glad it worked out. Sorry we couldn’t get together, would have loved to meet you in person.
Hans
:cheers:

[-=Jeff=-]

Thank you for the fuel rails, Hans. They are ready to bolt on. Aside, your son works a mile from my project. Worked out perfectly!
George.

Are you actually working on your 89 project now? Finally?

[Corvettes White]

Are you actually working on your 89 project now? Finally?


Hi Jeff. Maybe in January. I have been swamped with everything else. Not to mention three engine builds and a respray in the last four years. I was in southern Indiana last month and met up with Brett. He is doing the fiberglass panels and rear bumper for me. So I guess on a technicality I am working on it. All I really need to do next is order some injectors and put the top back on the engine. Then bolt the drive train together. There are parts for the project in the house, in the garage, in a storage place, at Brett's, and at my Brother's house. And a shell of a car under cover outside. I admit I miss driving the '89. A special feel about it. Best to you. George

Hans, I think I should have taken you up on the fuel line. Let me know how much. Thank you.

[Ccmano]

TTT...

[Ccmano]

Thank you for your purchases Tom and Glen.
H
:cheers:

[Ccmano]

TTT
:cheers:

[Ccmano]

Thank you for your purchase Jorgen in Sweden.
H
:cheers:

[Ccmano]

Thank you for your purchase Paul...
H
:cheers:

[Subfixer]

What happened to the rest of the engine?

[Ccmano]

What happened to the rest of the engine?

The “Long Block” was sold to the German Racing team that campaigns the LT5 powered Opel Kadet hill climb car. Hovemann Racing. It will be rebuilt into their backup engine. Everything else was or is being sold here. The only major piece left is the transmission.
H
:cheers:

[Subfixer]

The “Long Block” was sold to the German Racing team that campaigns the LT5 powered Opel Kadet hill climb car. Hovemann Racing. It will be rebuilt into their backup engine. Everything else was or is being sold here. The only major piece left is the transmission.
H
:cheers:



That's a cool place for that long block to end up.

[Ccmano]

TTT Make offers...
H
:fahne:

[Ccmano]

Back to regular price but feel free to make an offer.
H

[JMO343]

PM sent.


John
1990 #2331

[2poor4aZR1]

Any parts left or available? I have some odds and ends I'd like to grab if you still have them.

[Ccmano]

Any parts left or available? I have some odds and ends I'd like to grab if you still have them.

Here's what's left....
Half price if you want it all or make offer.

*Injector Housing bolt set. $25
*Throttle body bolt set $25
*MAP Sensor with plenum bracket $55
*Secondary throttle plate arms, washers, nuts set $79
*Secondary linkages and mounting brackets with bolts $65
*AC compressor, functional, no clutch $129
*IAC Motor $25
*Intake air temp sensor $25
*[B]Both under plenum water temp sensors $35
*Drive shaft with the yoke attached $149
*Cam cover vent line 1 driver side available $20 ea.
*2 Flywheel bolt sets $39 ea
*2 New Knock Modules (90 only) $99 ea.
*Power steering bracket with bolts $39
*Right and left engine mount brackets with bolts $70
*Vacuum line keeper with bolts, mounts to PS reservoir $35
*1 set ground bolts to top of bellhousing $25
*1 set Bell housing mounting bolts $39
*1 set DIS Module mounting bolts $20
*1 set oil filter housing mounting bolts $20
*Engine Wiring Harness Loom $20
*Bell housing inspection cover $20
*transmission exhaust system hanger $20
*Clutch fork and pivot $50
*1 set fuel injector clips $10

[G8nightman]

Pic of MDPS Sensor with the ECM bracket?

[Ccmano]

Pic of MDPS Sensor with the ECM bracket?

Sorry for the delay in getting back to you... crazy weekend.
Here are coupe pix....
H

https://farm66.staticflickr.com/65535/52790229632_6240d09a4b_c.jpg (https://flic.kr/p/2oqTJ5Y)

https://farm66.staticflickr.com/65535/52790784131_7beed349ee_c.jpg (https://flic.kr/p/2oqWyVi)

[G8nightman]

Cool I will take it.

[Ccmano]

Cool I will take it.

Sent you a PM.
H