My Fuel rail Schrader valve is leaking.

[phrogs]

Anyone know a good valve removal tool that will work on this fuel rail?

I don't want to buy one that won't fit.

Also I have a old rail with one but got a part number for a replacement valve?

Thanks
Jp

[RussMcB]

A guess: If it is similar to a tire valve, you can use a valve core removal tool (available at most auto parts stores, maybe Walmart).

I took mine out to add a fuel pressure sender, but it's been too long for me to remember exactly how I did it. I don't remember it being hard, so that makes me think the core remover worked.

[Ccmano]

A guess: If it is similar to a tire valve, you can use a valve core removal tool (available at most auto parts stores, maybe Walmart).

I took mine out to add a fuel pressure sender, but it's been too long for me to remember exactly how I did it. I don't remember it being hard, so that makes me think the core remover worked.

Yup, same as any tire schrader valve.
H
:cheers:

[jss06c6]

Guys,

Just went through this (had slight leak on the original high side schrader valve). If you have an R-12 valve, you'll need an R-12 tool, which is quite a bit larger in diameter than a R134a tool. I picked up a set (schrader valves and removal tools) on Amazon that worked great.. I'll get a picture posted a bit later this morning..

Sent from my SM-G950U using ZR-1 Net Registry mobile app (http://r.tapatalk.com/byo?rid=90383)

[phrogs]

Ok, thanks!