View Full Version : '94Z VS cammed LS1 from a roll
Anyone see the what appears to be a '94 ZR-1 with gears only lose to a cammed '00 LS1 Camaro on YouTube? And it is from a roll?
Good video but a cammed LS1 appears to be no contest for a stock LT5 with gears from a roll.
Granted the Camaro has gears and a host of other mods looks like the LS is no slouch!
I am not sure if I wanna post that kind of video and risk getting banned! LOL
If you go to you tube and use these words as your search: c4 zr-1 corvette and filter for this month you should find the video.
:flag:
tccrab
04-04-2019, 09:10 PM
I'll step out on a limb here, nobody better ban you if you post up a YouTube link.
Maybe 10 years ago the mood of this august organization wouldn't allow it, but It's my opinion that things have changed......
Post it up.
'Crabs
'90ZR1 #792
XfireZ51
04-04-2019, 09:14 PM
Maybe he should run a cammed LT-5. What do we know about the ZR?
32valvesftw
04-04-2019, 09:33 PM
I just watched the video, the Z sounds like he is shifting too soon. Perhaps one of them was a poor driver.
I'll step out on a limb here, nobody better ban you if you post up a YouTube link.
Maybe 10 years ago the mood of this august organization wouldn't allow it, but It's my opinion that things have changed......
Post it up.
'Crabs
'90ZR1 #792
https://youtu.be/ReyEAKtyNuA
Maybe he should run a cammed LT-5. What do we know about the ZR?
Seems to be stock except for gears.
If so then I wonder how any given 500hp package would compare in the same event?
-=Jeff=-
04-04-2019, 10:35 PM
wonder if he was short shifting the ZR-1..
wonder if he was short shifting the ZR-1..
I don't think it would matter. A 400hp car vs a LS with about 500hp is gonna lose every time.
-=Jeff=-
04-06-2019, 12:26 AM
agreed.. just was curious..
Regimof3
04-07-2019, 11:58 AM
I saw it too. Then I forgot about it because I went down a zr1 video rabbit hole.
LGAFF
04-07-2019, 12:25 PM
His dyno #s...
With Longtubes and LS6 intake it put down 386whp and 365tq through a T56 and LS7 clutch. Ran out of injector at 6000rpm stock 853 heads
LGAFF
04-07-2019, 12:27 PM
Karl you actually filmed this a LS1 Corvette w/cam, etc, pulled me off the line by a few car lengths and then I passed him at the end 12.1 @121.25
https://www.youtube.com/watch?v=ZvIRjAy7HRk
-=Jeff=-
04-07-2019, 12:35 PM
End of the day, there is always someone faster.....
Ccmano
04-07-2019, 12:38 PM
End of the day, there is always someone faster.....
Isn’t that the truth... and with more money too lol!
H
:cheers:
Karl you actually filmed this a LS1 Corvette w/cam, etc, pulled me off the line by a few car lengths and then I passed him at the end 12.1 @121.25
https://www.youtube.com/watch?v=ZvIRjAy7HRk
Yes I remember. I am looking forward to another trip to US41.
Odds are a 500hp Z would have outrun the LS in the video.
End of the day, there is always someone faster.....
Agreed. I am happy where I am at in the hp rankings.
Paul Workman
04-07-2019, 03:34 PM
At the last 1/2 mile WANNAGOFAST event in Monee, IL I lined up with a yellow C5 with "VENGEANCE RACING" blazed across the sides.. I don't know the specifics, but assuming it was an LS1(??), it blew me out by at least 4 car lengths, from a dig.
Mine is a ~ 510+hp with stock cams and stock rear end. The C5 had a radical cam and open exhaust and arrived on a trailer for the event; hardly a streetable car, is my point.
No regrets! Just too bad Pete wasn't there with his nasty Green Machine, or the outcome would have been different, I suspect. (And, Pete would have arrived and driven home too...in traffic...no problem.)
Vette73
04-07-2019, 08:44 PM
Agreed...There's always somebody going to be faster and with more money....
XfireZ51
04-07-2019, 10:32 PM
Pete did 154 the last time he was at WGF. He was up there w C6 ZR1s.
Seems like the perfect moment for a 125hp shot of n2o.
If things were only as easy as they are in the movies!
vBulletin® v3.8.11, Copyright ©2000-2025, vBulletin Solutions Inc.