C6 ZR1 wheels on a C4 ZR-1

[Norwegianmopar]

Anyone know what size wheels and tires I can put on my Z without getting any rubbing or clearance issues?

Would like to get some C6 ZR1 style wheels in staggered 18/19 inch or just 19 inch all around.

All input is highly appreciated.

Roy M.

[indy91zr1]

From what I have seen from looking for wheels right now the rears should fit with a spacer and the fronts clear no problems. You could prob find a bolt on spacer that would put the wheel in the correct offset for the z. Wanna say you will need like a 10mm spacer for the rear. Looks like 275/30/18 for fronts and 32/30/19 for rears should work.

[henryr]

MMR sells the new ZR1 replicas in 18's....

seller on ebay says theyll do custom offsets

ive been pondering that route


https://www.ebay.com/itm/18-M755-Flow-Forged-MRR-Black-18x10-18x12-Corvette-ZR1-Style-Replica-Wheels/382847950710?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m1438.l2649

[Norwegianmopar]

Consider getting these in 9,5 x 18 and 11 x 19 to get some rubber too, not just rims with a tape roll, which I don't like myself. What do you think? Will be black and I will add a red stripe on the edge when I get them. They will go on an Admiral Blue car if everything goes as planned.

https://www.mrrwheels.com/products/fs1

[Paul Workman]

IIRC, Dominic (aka XfireZ51) has C6ZR1 wheels on his Z. He'd be one to ask any particulars re: those wheels.

[henryr]

IIRC, Dominic (aka XfireZ51) has C6ZR1 wheels on his Z. He'd be one to ask any particulars re: those wheels.


are there pics anywhere ?


ive contacted MMR directly about the offsets - no response yet


i'd prefer 18/18s to maintain the look