WTB Rear Wheel Socket Extension for 1990

[justingbeck]

I need to buy an original wheel socket extension for 1990 ZR1. I would also like to find the Velcro holder for the extension. Any help would be greatly appreciated

[spork2367]

https://www.amcorlocks.com/product-page/890-04-hex-key

[Mystic ZR-1]

Didn’t we figure out recently that the 1990 Zs didn’t
come with a socket extension?
Mine, #2282, doesn’t have one.... NCRS didn’t ask about it.

[justingbeck]

I missed out on that topic but it is mentioned that 1990 and 1991's are equipped in the NCRS pgs. 53-55 in the technical manual/Judging guide. I hope you're right because that would be one less worry for me

[Mystic ZR-1]

They’ve been known to be wrong! Often....
Besides, it would probably be only 1 point deduction, you start with 4500.

[justingbeck]

There is a wheel instruction sheet GM part# 10080896 showing the extension that is connected to the lug wrench followed by the lug nut lock "key". There is one of these sheets along with the Velcro holder, 1990 manual, and the rest of the 1990 supplemental info on Ebay. It all came out of the same car. The guy wants a ton of money for this but it does support the theory that it was supplied with 1990 Corvettes. There is an illustration of the same instruction sheet on page 54 of the NCRS manual.
I don't plan on having my car judged but I would like to get all of this literature

[jrd1990zr1]

Justin,

I'll look, I may have the sheet you are looking for. May be able to scan and e-mail it.

Gloria McNay the C-4 NCRS interior judge used to make the velcro holders.

I have a phone # and e-mail address if you need it e-mail me.

John