FX3 question

[EvanZR1]

I discovered the other day (getting car ready for going to the Mile), that while the car is a 1991 and Pete said the shocks were 91s when putting DRM coilovers on, that the FX3 controller is a 92+ unit. What kind of issues will this cause (if any). I have not been getting any errors, but the car seems too floaty even on the stiffest setting.

Should I try to find a 90/91 controller and swap it out?

Pic of controller in car:
https://www.dropbox.com/s/5l6hjnaiz8jql25/2018-10-14%2016.12.24.jpg?raw=1
https://www.dropbox.com/s/k8p17lr563ssygq/2018-10-14%2016.12.33.jpg?raw=1

[-=Jeff=-]

If I recall the 92 FX3 controller spins the actuators a shorter distance. I would confirm the shocks, not that I doubt Pete, but the 90/91 controller does spin the shocks further when adjusting


Sent from my iPhone using ZR-1 Net Registry (http://r.tapatalk.com/byo?rid=90383)

[EvanZR1]

That's what I thought as well. I need to double check the shock numbers, if they are 91 shocks, I'll probably try and find a 91 controller of Ebay to plug in. Alternative is putting the 92+ shocks that came with the coilovers back on.