ZR-1 Parts:Name Your Part & Price

[Pete]

I'm completely taking apart a 1990 ZR-1 the frame will be going to the junk yard it's a shame darn frame is perfectly straight but i need it gone and the parts gone.

Let me know what you need from bumper to bumper.
Fenders wells skid bar,control arms (full poly suspension),ABS unit, etc,.
Name your price as long as it's over shipping cost.
Basicly if shipping is $10, pay $11 for the part total of $21 and it's yours.
If you decide to pick up we will come to a price agreement.
Paypal or check.

Thanks
Pete

[TexasZR1]

I have a black 1990 ZR1 with ~ 53k miles that could use a number of parts.


-wiper motor and control module


-shock actuators and ride control computer?


-AC control unit?


-Misc front / undercarriage parts. The prior owner had an 'encounter' with a curb and went right up over it. There's a lot of parts that got scrapped up. I'll have to send pictures of what I need and see what you have I guess?


Shipping would be to 77084.


Sorry to hear you're having to part it! Care to share the story?

[BurnRubber]

I need a good used Ecm. $650:)

[Flyman 27]

I could use a good dash pad if the mounting points are good.
I could also use a couple under dash structural pieces. How far are you tearing it down?
I live fairly close, so I could pick everything up.

[32valvZ]

What color is the interior?
Shocks/Actuators for FX3?
ICM?

[Pete]

I have wiper motor.

No FX3 Parts.

No A/C compressor (only have a few lines)

Email me pics for undercarriage parts PETEZR1@gmail.com

Pete




I have a black 1990 ZR1 with ~ 53k miles that could use a number of parts.


-wiper motor and control module


-shock actuators and ride control computer?


-AC control unit?


-Misc front / undercarriage parts. The prior owner had an 'encounter' with a curb and went right up over it. There's a lot of parts that got scrapped up. I'll have to send pictures of what I need and see what you have I guess?


Shipping would be to 77084.


Sorry to hear you're having to part it! Care to share the story?

[Pete]

I know somebody looking for one also willing to pay $1000.

Pete



I need a good used Ecm. $650:)

[Pete]

Dash pad was sold.
Come by and take out what you need.

Pete



I could use a good dash pad if the mounting points are good.
I could also use a couple under dash structural pieces. How far are you tearing it down?
I live fairly close, so I could pick everything up.

[Pete]

Red interior.

No FX3 parts.

No ICM.

Pete


What color is the interior?
Shocks/Actuators for FX3?
ICM?

[phrogs]

I know somebody looking for one also willing to pay $1000.

Pete

Hey send them my way

[BurnRubber]

Hey send them my way

I will buy a good used ECM for $1000. Come on guys. Cough one up for me.

[91vettezr1]

I need a good used Ecm. $650:)

i know marc haibec is rebuilding these units zr1specialist.com

[BurnRubber]

i know marc haibec is rebuilding these units zr1specialist.com

Not mine. I already sent it to him.

[garyhugo]

Pete if you can get the wheel speed sensors out in good working condition I will take all four.
Gary

[George Maz]

-VSS vehicle speed sensor
-Reverse switch plug
...both are small parts from the transmission if you can spare them.
-Will take 4:10 correction gears, blue & white, if present.
-plastic grommet, for drain at fuel fill boot.
-foam doughnuts, from rear hatch pistons.
-rubber grommets, from rear plastic decklid.
-DERM (if no airbag deployment)...would like to give it to member "WVZR1".
-driver side PCV tubes aluminum hardlines tabs intact.
- Horns ...honk honk...lol.

Probably more stuff too, maybe easier if I just take pictures of what I need.

841884198420

Sent from my SM-N920V using ZR-1 Net Registry mobile app (http://r.tapatalk.com/byo?rid=90383)

[S.hafsmo]

Do you have the braces for the rear fender/wheel well (upper+lower)?

[mhobtr]

Not mine. I already sent it to him.


Check your PM's.

[mhobtr]

If you can get the antenna grommet off without tearing it up, I will buy it.

[Flyman 27]

Picked up my parts Sunday, thanks Pete!

His car still has both rear quarters intact if anyone needs them, they are in very good condition, but you have to be quick, the car will soon be gone.

He also has a steering column with wheel & air bag in good condition. BTW, how much did you want for it?

[-=Jeff=-]

If you can get the antenna grommet off without tearing it up, I will buy it.



It was removed without tearing it, I know as I was there. But are they different then a narrow body car? Meaning has anyone one here confirmed it?


Sent from my iPhone using ZR-1 Net Registry (http://r.tapatalk.com/byo?rid=90383)

[mhobtr]

It was removed without tearing it, I know as I was there. But are they different then a narrow body car? Meaning has anyone one here confirmed it?


Sent from my iPhone using ZR-1 Net Registry (http://r.tapatalk.com/byo?rid=90383)

The slope of the wider body is different at the antenna. A grommet for a regular C4 will not sit flush with the body.

[owwdee]

I need the passenger rear quarter panel if you are able to remove it without damaging it. Shipped to 80022. Not sure how long you’ll have the car. Probably would take a little work to carefully remove it. Let me know. Thanks

[Pete]

George i have none of the above.
Most of the stuff went to the dumpster.

Pete


-VSS vehicle speed sensor
-Reverse switch plug
...both are small parts from the transmission if you can spare them.
-Will take 4:10 correction gears, blue & white, if present.
-plastic grommet, for drain at fuel fill boot.
-foam doughnuts, from rear hatch pistons.
-rubber grommets, from rear plastic decklid.
-DERM (if no airbag deployment)...would like to give it to member "WVZR1".
-driver side PCV tubes aluminum hardlines tabs intact.
- Horns ...honk honk...lol.

Probably more stuff too, maybe easier if I just take pictures of what I need.

841884198420

Sent from my SM-N920V using ZR-1 Net Registry mobile app (http://r.tapatalk.com/byo?rid=90383)

[Pete]

I have the wiper motor.

No suspension parts.

No A/C controller.

Let me know what chassis parts you need.

Pete


I have a black 1990 ZR1 with ~ 53k miles that could use a number of parts.


-wiper motor and control module


-shock actuators and ride control computer?


-AC control unit?


-Misc front / undercarriage parts. The prior owner had an 'encounter' with a curb and went right up over it. There's a lot of parts that got scrapped up. I'll have to send pictures of what I need and see what you have I guess?


Shipping would be to 77084.


Sorry to hear you're having to part it! Care to share the story?

[Pete]

Yes i have them,if your talking about the 2 black bars on each side.

Pete



Do you have the braces for the rear fender/wheel well (upper+lower)?

[Pete]

It's gone.

Pete

If you can get the antenna grommet off without tearing it up, I will buy it.

[Pete]

Hi Dan
Your welcome and thank you too.

I was going to keep the steering column but if you need it i will let it go for $250 complete come pick it up.

Pete





Picked up my parts Sunday, thanks Pete!

His car still has both rear quarters intact if anyone needs them, they are in very good condition, but you have to be quick, the car will soon be gone.

He also has a steering column with wheel & air bag in good condition. BTW, how much did you want for it?

[spork2367]

I wish I had a way to cheaply/easily get the frame to PA. Let me know if you have any ideas. I'm just too busy with work to drive out.

[Pete]

I'm sorry but had it for too long it had to go.

Pete


I wish I had a way to cheaply/easily get the frame to PA. Let me know if you have any ideas. I'm just too busy with work to drive out.

[TexasZR1]

Aluminum parts.

[Pete]

Throw in an Extra $5 for shipping cost and i'll send them with the wiper motor.

Pete


Aluminum parts.

[Joelbbvette]

Do you have the rear license plate surround? Also would love a grab bag of interior screws. 32955

[S.hafsmo]

Yes i have them,if your talking about the 2 black bars on each side.

PeteIndeed I am. $50?

Sent from my MI MIX using ZR-1 Net Registry mobile app (http://r.tapatalk.com/byo?rid=90383)

[Pete]

Sorry,it wa sold.

Pete

QUOTE=Joelbbvette;285426]Do you have the rear license plate surround? Also would love a grab bag of interior screws. 32955[/QUOTE]

[Z51JEFF]

What shape is the carpet in on the right side of the trans tunnel? I need the antenna relay plug under the rear center trim,must be in very nice shape and the small capacitor at the brake light wiring harness at the brake light connector. This capacitor is should be covered in wide black tape.

[-=Jeff=-]

Carpet on the console side? I have it as I wanted the black plastic console side. I need to look at the carpet to check the condition, as I recall it is clean

[ALLTHECAMS]

Rear cargo area surround (black plastic pieces)?

Sent from my XT1710-02 using Tapatalk

[-=Jeff=-]

Rear cargo area surround (black plastic pieces)?

Sent from my XT1710-02 using Tapatalk

I know a couple pieces were cracked/Junk.. I think Pete has the back piece, but it might have been junk too. I was there going through stuff last week

[Z51JEFF]

Carpet on the console side? I have it as I wanted the black plastic console side. I need to look at the carpet to check the condition, as I recall it is clean

Is it still glued to the trim panel?

[Z51JEFF]

Rear cargo area surround (black plastic pieces)?

Sent from my XT1710-02 using Tapatalk

The relay plug for the antenna is under the center piece of the black trim,I only need the relay connector.

[-=Jeff=-]

Is it still glued to the trim panel?

Yes, but I looked last night, Carpet is ripped in the middle

[conesare2seconds]

Looking for a passenger side hood seal.

[Pete]

if you are talking about the fender well seal.
They are not in good condition.

Pete


Looking for a passenger side hood seal.

[GOLDCYLON]

Pete do you have the rubber grommet insert that goes onto the top of the radiator on the passenger side? I also need the back grommet that fits in the top of the shifter boot that mates the top of the shifter boot to the shifter arm

[conesare2seconds]

Pete, thanks for letting me know.

[ZuggZR1]

Do you have 1990 ZR1 Fuel sending unit that has 2 fuel pumps?

[Joelbbvette]

Do you have the gas cap and what is the date stamped into it. If it was from an early car Oct 89 build date, I'm really interested.

[G8nightman]

Pcv piping?


Sent from my iPhone using ZR-1 Net Registry (http://r.tapatalk.com/byo?rid=90383)

[Pete]

Do you have 1990 ZR1 Fuel sending unit that has 2 fuel pumps?


PM'd you.

Pete

[Pete]

Do you have the gas cap and what is the date stamped into it. If it was from an early car Oct 89 build date, I'm really interested.


No gas cap.

Pete

[Pete]

Pcv piping?

Sent from my iPhone using ZR-1 Net Registry (http://r.tapatalk.com/byo?rid=90383)


I might have a stock lower piece if your interested.

Pete

[Buckley]

Looking for rear license plate bracket, would you happen to have one?

[Joelbbvette]

Looking for the four clips metal and plastic wires that connect to the vertical hatch struts. With or without the hatch struts as I really only need the square black plastic pieces with the tabs still on. $20 shipped? Any extra screws for fenders, license plates, etc are always welcome and could add some extra to cover those.
Thanks
Joel

[ZRXMAX]

Did the steering column sell yet?

You can text me if you want to. Faster response time.

951 237 2357
Ted

[Corvette95]

Old thread I know but do you have a RF speed sensor connector (harness side and sensor side) or the harness pigtail and the RF sensor , as it does unplug. I also need the red differential tag "limited slip differential", also need the wiper plastic covers that retain the sprayer lines.
Thanks!

[Pete]

Old thread I know but do you have a RF speed sensor connector (harness side and sensor side) or the harness pigtail and the RF sensor , as it does unplug. I also need the red differential tag "limited slip differential", also need the wiper plastic covers that retain the sprayer lines.
Thanks!

Sorry, guys all the parts are gone.