Door Window Removal Advice

[Jagdpanzer]

Have to do some work on diver side window regulator. Anyone have some pointers on how to best remove the widow?


Sent from my iPhone using ZR-1 Net Registry (http://r.tapatalk.com/byo?rid=90383)

[conesare2seconds]

Following with interest. I need to repair or replace my DS regulator.

[ZWILD1]

Either use the GM shop manual or you can buy a CD. Take some pics to help you remember how things are. Another suggestion is you probably can find a video on youtube of someone working on the C4 window regulator. While I have not had to do any repairs to my current car, I did remove both regulators from my sons 98 Trans Am to replace the electric window motors.

I made myself two window props out of some wood scraps with a U-shaped notch for the bottom of the glass and put rubber anti slip pads on the part that rest against the bottom of door. I did this to give myself some room inside of the door and so I didn't need to remove the window. If you have to mess with the bolts that hold the front and rear window tracks its best to mark their positions with a scribe or pencil.