PDA

View Full Version : anyone know where to get vacuum lines for the Z

zr-1assassin
03-04-2007, 11:09 PM
NEED THE VACUUM LINE THAT CROSSES OVER THE MOTOR FROM DRIVERS SIDE PLENUM TO PASS. SIDE PUMP AT THE FRONT OF THE CAR. ANYONE KNOW WHERE TO GET THESE. CHECKED ECKLERS,MID-AMERICA AND CORVETTE CENTRAL, COULDNT FIND ANY. THERE IS A KIT ON EBAY FOR $300.00 BUT ALL I NEED IS THE ONE.
Jeffvette
03-05-2007, 12:40 AM
www.whiteracingproducts.com
Z Factor
03-05-2007, 11:16 AM
In addition to the source posted, you can contact P & G. They can normally get what you need at reasonable prices, certainly better than the dealer. Their number is 1.888.870.0280 x214

https://www.partszoneonline.com/index.php

:cheers:
hpbadger
03-05-2007, 03:56 PM
I will be checking these sources myself as I broke a vacuum line yesterday:cry:

Anybody have any luck patching up broken plastic lines? fobs? tape?
tccrab
03-05-2007, 04:56 PM
I will be checking these sources myself as I broke a vacuum line yesterday:cry:

Anybody have any luck patching up broken plastic lines? fobs? tape?

The "plastic" tubing itself is a semi-rigid nylon tubing that's available from Legris. I can't remember the exact size (3mm ???), but it's metric.
Here's a link to their website:
http://www.legris.com/legris_com/VisualSearch?activite=BM&gr=09&fa=01
You can buy similar tubing from most any Pneumatic supply house. Look in the yellow pages under Pneumatic.

TomC
'90ZR1 #792
hpbadger
03-06-2007, 02:01 PM
The "plastic" tubing itself is a semi-rigid nylon tubing that's available from Legris. I can't remember the exact size (3mm ???), but it's metric.
Here's a link to their website:
http://www.legris.com/legris_com/VisualSearch?activite=BM&gr=09&fa=01
You can buy similar tubing from most any Pneumatic supply house. Look in the yellow pages under Pneumatic.

TomC
'90ZR1 #792

Thanks!

hpb