List of C4 ZR-1/LT5 Repair, Maintenance, and Performance Shops

[Ccmano]

One of the questions always asked in the forum is, "Where can I find a shop in that can work on my Z?". Here is a list of C4 ZR-1 (LT5 specifically) competent shops.
Note: 01/30/2025, shops in Orange are unknown


Tier 1 Shops - High Level LT5 Competence

ARIZONA

ZFDoc - Bill Boudreau
5612 East Almeda Court, Cave Creek, AZ 85331 (Phoenix Area)
602-319-6575
http://zfdoc.com/


CALIFORNIA

Paul Pfaff Racing
5362 System Drive, Huntington Beach, CA
714-296-6726
http://www.pfaffengines.com/


COLORADO

Draggin the Ave Customs - Jerry Price
3160 N Industrial Way, Castlerock, CO 80109
303-621-5101


FLORIDA

Evolution Motorsport Engineering - Dempsy
3808 East Dr. Martin Luther King Jr Boulevard, Tampa, Florida 33610
813-260-0067
540-737-8779
INFO@EVOLUTION-MOTORSPORT.COM
http://www.evolution-motorsport.com/


ILLINOIS

Haibeck Automotive Technology - Marc Haibeck (Forum Member Marc Haibeck (https://zr1.net/forum/member.php?u=967))
430 W Kay Unit D, Addison, IL 60101
630-458-8427
http://www.zr1specialist.com

Pete's Performance Parts - Pete Polatsidis (Forum Member Pete (https://zr1.net/forum/member.php?u=10))
Des Plaines, IL
847-778-4507
https://zr1pete.wordpress.com


INDIANA

Pepmeier Engine Development - Todd Pepmeier (Forum Member tpepmeie (https://www.zr1.net/forum/member.php?u=420))
10298 Copper Ridge Drive, Fishers, IN 46040
317-503-3287
pepmeierengines@yahoo.com https://toddpepmeier.wixsite.com/pepmeierengines


KENTUCKY

Graham Behan
New Concord, KY 42076
260-701-8860
grahambehan@yahoo.com
(Senior Lotus engineer & mentor to virtually all of the most well known LT5 shops)


PENNSYLVANIA

JWC Performance
605 Guilford Ave, Chambersburg, PA 17201
301-991-6991
https://jwc-performance.com/


TEXAS

Crossed Flags Performance - Steve Schroder
37007 Red Rock, Magnolia, Texas 77355
832-748-1286 cell
sschroder@crossedflagsllc.com

Henderson Performance Technologies (HPT) - Corey Henderson
1660 Loop 337, New Braunfels, TX 78130
830-620-1117
https://www.hendersonperformance.com/
https://www.facebook.com/HendersonPerformance/


WASHINGTON

Benchmark Automotive Tire & Service - Scott Carlson
8248 NE SR 104, Kingston, WA 98346
360-297-6812
http://benchmarkautoandtire.com/


Tier 2 Shops - General LT5 Competence - Possible Mixed Reviews - Possibly Once a Tier 1 Shop but Current Status Unknown


CALIFORNIA

American Heritage Performance
25901 Belle Porte Ave, Harbor City, CA 90710
310-326-2399
https://americanheritageperformance.com/

Franks Performance
2020 S Susan St Unit E, Santa Ana, CA 92704
714-403-5758
www.franksperformance.com

Precision Motive - Pat Hendrix
25789 Dollar St, Hayward, CA 94544
510-886-0789
http://www.precisionmotive.com

Northstar Automotive Technology aka Park Performance Northstar
190 Calderon Ave, Mountain View, CA 94041
650-967-8388


COLORADO

Yoder Chevrolet (do they still have a C4 LT5 mechanic?)
601 Denver Ave, Fort Lupton, CO 80621
720-689-0501
http://www.purifoychevrolet.com


FLORIDA

Corvette Masters - Robbie Hooper
8615 US-17, Maitland, FL 32751
407-831-3990
http://corvettemasters.com

SS Performance Auto
5760 Progress Rd, South Miami, FL 33143
305-668-9792
www.ssperformanceauto.com


GEORGIA

South Georgia Corvettes - Aaron Scott
1396 Dillon Rd, Thomasville, GA 31757
229-224-2919

Catapano Corvettes - Bob Catapano
4026 Mount Vernon Dr. Woodstock Ga. 30189
770-380-0290
catapanovettes@Gmail.com


LOUISIANA

Ebert's Engine Service
60077 US-11, Slidell, LA 70458
985-960-2483


MARYLAND

Gallant's Automotive - Rob Metzger
309 S Atwood Rd, Bel Air, MD 21014
410-838-2355
https://www.gallantsautomotivebelair.com/

Sport Chevrolet (must ask for their C4 LT5 Mechanic)
3101 Automobile Blvd, Silver Spring, MD 20904
240-802-7405
https://www.sportchevrolet.com/service


NEW YORK

Vette Doctors
52 Elm Pl, Amityville, NY 11701
631-841-0779
https://www.thevettedoctors.com/


PENNSYLVANIA

Brady's High Performance
386 Millwood Rd, Willow Street, PA 17584
717-283-0056
https://www.facebook.com/BradysHighPerformanceServiceLlc/


CANADA

Stevenson Specialty Cars
35 Brook St. Unit 1, Port Perry, ON, L9L 1B5
905-982-0826
Dave@Stevensonspecialtycars.ca
http://stevensonspecialtycars.ca/

Who can we add?

Feel free to provide updates, good and bad, we really need to vett these shops!

[I]This should be a list of people who know what they're doing, particularly on an LT5 engine.

H
:cheers:

[PhillipsLT5]

Bill Boudreau at (602) 319-6575.
http://zfdoc.com/
Cave Creek, AZ (Phoenix Area)

[lfalzarano]

Corvette Masters - Orlando, FL


Sent from my iPhone using ZR-1 Net Registry (http://r.tapatalk.com/byo?rid=90383)

[Paul Workman]

Corvette Masters - Orlando, FL


Sent from my iPhone using ZR-1 Net Registry (http://r.tapatalk.com/byo?rid=90383)

Not heard of this one. Would you say they're "LT5" savvy(?); not just C4s generally?

[Ccmano]

Does Lingenfelter and Doug Rippie still work on our cars?

Any new info on Vette Doctors in NY or Tony’s Corvettes on MD?

Not sure I would include Corvette Mike in Anaheim, CA. although in a pinch they would do, unless someone has better info.

This should be a list of people who really know what they are doing....
H
:cheers:

[secondchance]

Not heard of this one. Would you say they're "LT5" savvy(?); not just C4s generally?

I know the owner, Robbie Hooper, quite well. He serviced my Z starting around 1992 until I left Florida in 2001. I don't know how extensive work Robbie has done on LT5s but knowing his tremendous knowledge in all automotive stuff, I am sure he can tackle any work even for LT5s.

Even nowadays, I call Robbie at times to ask for his opinion on diagnosing.

[Ccmano]

I know the owner, Robbie Hooper, quite well. He serviced my Z starting around 1992 until I left Florida in 2001. I don't know how extensive work Robbie has done on LT5s but knowing his tremendous knowledge in all automotive stuff, I am sure he can tackle any work even for LT5s.

Even nowadays, I call Robbie at times to ask for his opinion on diagnosing.

One more member recommendation for this shop and I will add then to the list.
H
:cheers:

[lfalzarano]

Robbie’s Corvette Masters is located next to Rogers Corvettes. Rogers is a Chevrolet dealer that only sells low mileage and excellent condition Vettes of almost any year. He has sold to me and many other ZR-1 owners. He recommended Robbie for mechanical work.


Sent from my iPhone using ZR-1 Net Registry (http://r.tapatalk.com/byo?rid=90383)

[Ccmano]

Any votes for Dave Mullins Corvette in Dallas?
H
:cheers:

[Saoirse32]

Yet to be an owner, and surely a novice in the purest sense, but any experience with West Coast Corvettes in Anaheim, CA?


Sent from my iPhone using Tapatalk

[Ccmano]

Yet to be an owner, and surely a novice in the purest sense, but any experience with West Coast Corvettes in Anaheim, CA?


Sent from my iPhone using Tapatalk

More of a C1,C2,C3 shop. Can’t comment on C4 or ZR-1 ability.
H
:cheers:

[Dynomite]

More of a C1,C2,C3 shop. Can’t comment on C4 or ZR-1 ability.
H
:cheers:

Some Observations for you :handshak:

Happy New Year Everyone :cheers::cheers::cheers:

Buy High.....Sell Low (https://www.corvetteforum.com/forums/c4-zr-1-discussion/3005470-tech-info-lt5-modifications-rebuild-tricks-500-hp-13.html#post1592505505)

[EvanZR1]

Any votes for Dave Mullins Corvette in Dallas?
H
:cheers:

That would be DMS Corvette Shop (http://dmscorvetteshop.com/) in Garland (suburb of Dallas). I sent them an email to see if they are familiar with ZR-1s, if they are, I'll check them out.

[Z51JEFF]

Precision Motive in Hayward Ca has worked on ZR-1s in the past but don’t know how extensive the Z knowledge is at that shop. I do know they put the automatic in the Steel Blue 91 with the Shinoda body kit floating around and worked out all the bugs,not sure who did the plumbing for the nitrous setup. The owner of the shop Pat Hendrix is a great guy to deal with and he’s had this shop for years.

[Ccmano]

Possibly the better solution is to list two categories. Vetted known level one “Master Shops” and level two “Basic Competency” Shops. Based on member feed back we can move shops between the two or out altogether.
H
:cheers:

[Ccmano]

What’s the story on South Georgia Corvette? Still in business? They did a lot of Z work 10years ago.
H
:cheers:

[Dynomite]

We have worked on several Zr1's over the years:

https://imagizer.imageshack.com/v2/800x600q90/922/I8BkMm.jpg (https://imageshack.com/i/pmI8BkMmj)

We work on all year Corvette's. Our specialty is C5, C6, C7's but we have more than a lifetime of experience on the C2's, C3's and C4's.

We do anything from General Services (brakes, etc...), Diagnostics (headlights, electrical, etc...) to full race builds (we have an in House 902s Engine Dyno and are a full automotive racing machine shop).

We are located in Harbor City (near Torrance/Palos Verdes/Long Beach/Pedro).

http://www.americanheritageperformance.com/

https://www.yelp.com/biz/american-heritage-performance-harbor-city

https://www.google.com/search?source=hp&ei=fj9PWqeyBIGzmQG_rInoDg&q=american+heritage+performance&oq=american+heritage+performance&gs_l=psy-ab.3..0l4j0i22i30k1l6.606.3540.0.3588.30.17.0.2.2. 0.303.1887.0j8j1j1.10.0....0...1c.1.64.psy-ab..18.12.1936.0..46j0i131k1j0i46k1.0.voStfmLQJzs# lrd=0x80dd4a753c860093:0xbc29102874b9e7a2,1...

The American Heritage Repair shop in CA cropped up in response to the reconditioning of a ZR-1 on CF.....Maybe of interest to your list?

This also cropped up in a google search which google searches may also locate other ZR-1 Repair Shops (try several different searches regarding the ZR-1) :thumbsup:
ZR-1 Repair and Maintenance Costs (https://repairpal.com/chevrolet/corvette+zr-1)

[Ccmano]

The American Heritage Repair shop in CA cropped up in response to the reconditioning of a ZR-1 on CF.....Maybe of interest to your list?

This also cropped up in a google search which google searches may also locate other ZR-1 Repair Shops (try several different searches regarding the ZR-1) :thumbsup:
ZR-1 Repair and Maintenance Costs (https://repairpal.com/chevrolet/corvette+zr-1)

Thanks Cliff. I am familiar with them, they are a relatively new (10 yrs or so) but highly respected corvette shop in SoCal. I was not sure of their ZR-1 capabilities. As we all know willingness to work on a Z and higher level LT5 work are two very different things. This may be another good example for a two tier list. I will update the listing accordingly later today.
H
:cheers:

[Ccmano]

This just posted over on CF regarding the presale inspection on the low mile 90’ for sale in SOCAL. A good example why these shops need to be vetted.
H

“My experience with Corvette Mike was terrible..I went to them as I wanted to have the best shop work and document on my low mile (17,000) ZR! car I purchased. They misquoted, charged extra, when the work was done and I picked it up, only to find out they didn't test drive it . it didn't run any better...THEY DIDN'T EVEN TEST DRIVE IT AFTER PLENUM/INJECTOR SERVICE..... they apologized and wanted me to give them a chance to correct the problem. I did.....They told me it was a bad TPS, (TPS was replaced with new delco by me) only to find out that the TPS connector was them problem ..This was a 1600++ repair for injector and plenum removal and they didn't test drive it..(I know, hard to believe)......The worst part was when service manager (carl) tried to tell me he he spent 4 hours diagnosis and it should cost an extra 4-500 dollars.....Since then I have found many people have had issues with
Corvette MIke...I would not recommend this business as they have no accountability”

[lfalzarano]

Sounds like they screwed up, but not sure that you want to test drive your Z! I always pop the hood and do a visual inspection and then tell them you’ll be right back. U road test it and either give them a thumbs up or get into to them to fix it right!

BTW-tell them there are no greasy finger prints on the engine and you don’t want to see them when you pick up the car!


Sent from my iPhone using ZR-1 Net Registry (http://r.tapatalk.com/byo?rid=90383)

[Ccmano]

Updated...

I’ll ask again, Does anyone have a status on the following shops? All of these were once top notch LT5 Shops.

South Georgia Corvettes, Thomasville, GA.
Doug Rippie, Waverly, MN.
Lingenfelter Performance, Decatur, Indiana.

For tier two, any new info on Vette Doctors in NY or Tony’s Corvettes on MD?

Based on some internet searches...

South Georgia Corvettes, Appears to be out of business.
Doug Rippie, Still shows an LT5 package but no maintenance or repair.
Lingenfelter Performance, no reference to anything C4 let alone LT5.
Vette Doctors, Shows an LT5 package, possible maintenance and repair. Is known to work on Z’s.
Tony’s Corvettes, no specific LT5 reference. Is known to work on Z’s.

[dredgeguy]

I understand that Tony's Corvettes in MD has a mechanic who is LT5 certified. Also Sport Chevrolet in MD also has a mechanic who is LT5 certified.

As for me, I stick with Wazoo who are all better than LT5 certified!

[Dynomite]

I understand that Tony's Corvettes in MD has a mechanic who is LT5 certified. Also Sport Chevrolet in MD also has a mechanic who is LT5 certified.

As for me, I stick with Wazoo who are all better than LT5 certified!

Have to ask......how do you become LT5 Certified? :p
Seems it is based on the personal opinion of others who are not LT5 Certified ;)

Or it is based on the percentage of times you guess exactly what is wrong with an LT5 in the first step of a diagnostic process based on the insufficient information provided by an Uncertified LT5 operator :)

Having said that......a group of guys not LT5 certified may as a group be LT5 Certified and that is why I have suggested Jim and the WAZOO guys on a Sat are LT5 Certified (I have never heard of a complaint) :sign10:

[grahambehan]

How does one become certified, enquiring minds want to know.

Graham

[dredgeguy]

My understanding was back in the day Chevy dealers who were lucky enough to receive a ZR-1 had to send at least one mechanic for special training to be LT5 certified. Not every Chevy dealer had one on staff. I do not know where the training was held. I would assume most of them are now retired.

[Ccmano]

There certainly was a GM LT5 training class with an extensive curriculum. I too recall dealerships had to have trained technicians to sell ZR-1s. Not sure if it was called a certification. Weren’t there even little trophies technicians got for completion?

Probably long since discontinued by GM.
H
:cheers:

[Jagdpanzer]

How does one become certified, enquiring minds want to know.



Graham



The WAZOO LT5 certifying process straight forward and starts with a critical evaluation of a candidate’s skills on the BBQ grille. Next up is stocking and maintaining the beer cooler. 21st and final step is cam timing while blindfolded with one arm tied behind the back.


Sent from my iPhone using ZR-1 Net Registry (http://r.tapatalk.com/byo?rid=90383)

[grahambehan]

The WAZOO LT5 certifying process straight forward and starts with a critical evaluation of a candidate’s skills on the BBQ grille. Next up is stocking and maintaining the beer cooler. 21st and final step is cam timing while blindfolded with one arm tied behind the back.


Sent from my iPhone using ZR-1 Net Registry (http://r.tapatalk.com/byo?rid=90383)
Guess that means I would fail, since my Wife says I can't even handle the beer cooler part right.


Graham

[Ccmano]

My wife refuses to let me barbecue, she does it all. Claims I burn everything. There is however method to my madness. ;)
H
:cheers:

[Jagdpanzer]

Come on guys, this is serious, no sand bagging


Sent from my iPhone using ZR-1 Net Registry (http://r.tapatalk.com/byo?rid=90383)

[jss06c6]

Wonder if the LT-5 training curriculum is in a barn somewhere??? Would be a nice barn find..

Sent from my XT1585 using ZR-1 Net Registry mobile app (http://r.tapatalk.com/byo?rid=90383)

[Vette73]

Updated...

I’ll ask again, Does anyone have a status on the following shops? All of these were once top notch LT5 Shops.

South Georgia Corvettes, Thomasville, GA.
Doug Rippie, Waverly, MN.
Lingenfelter Performance, Decatur, Indiana.

For tier two, any new info on Vette Doctors in NY or Tony’s Corvettes on MD?

Based on some internet searches...

South Georgia Corvettes, Appears to be out of business.
Doug Rippie, Still shows an LT5 package but no maintenance or repair.
Lingenfelter Performance, no reference to anything C4 let alone LT5.
Vette Doctors, Shows an LT5 package, possible maintenance and repair. Is known to work on Z’s.
Tony’s Corvettes, no specific LT5 reference. Is known to work on Z’s.
Maybe it has changed , but the last time I checked the LT-5 Package from Vette Drs. was somewhere in the neighborhood of 21,000 dollars....I mean,really?

Sent from my LG-TP260 using ZR-1 Net Registry mobile app (http://r.tapatalk.com/byo?rid=90383)

[DRM500RUBYZR-1]

How does one become certified, enquiring minds want to know.

Graham


Don't you have to spend a minimum of one night at a Holiday Inn?

Or must you buy one of the pewter mechanic with engine awards?
:D
:cheers:
Marty

[Dynomite]

You are Certified if?? :thumbsup:

The WAZOO LT5 certifying process straight forward and starts with a critical evaluation of a candidate’s skills Painting the BBQ with Silver or Black BBQ High Temp Rust Oleum for practice before Painting the LT5 Top End Silver Rustoleum High Temp . Next up is stocking and maintaining the beer cooler (The one with door opening cams and grease fittings). 21st and final step is cam timing while blindfolded with one arm tied behind the back while trying to read directions as this should be memorized with no reading directions necessary....now take off the blindfold and untie your arm and just do it.

Sent from my iPhone using ZR-1 Net Registry (http://r.tapatalk.com/byo?rid=90383)

You mean the first step is Painting the Top End using High Temperature BBQ Rust Oleum? (using a BBQ grill for practice) :D

Painting Top End (https://www.corvetteforum.com/forums/c4-zr-1-discussion/3005470-tech-info-lt5-modifications-rebuild-tricks-500-hp-9.html#post1588412803)

https://cimg5.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/350x400-1/80-49b05cc4_bb84_4449_af48_80241b98e38a_1__ed1d5c987c 7b74e588f25841f78ab867f6e5a3fa.jpghttps://cimg6.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/350x400-1/80-37cdb647_2dda_449e_8d0d_57905f95ecfd_1__9b8438e304 b23d4da9642916f1045c6eb6b04738.jpg
https://cimg7.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/350x400-1/80-8e46b8a0_fd42_44c0_b89b_e3e8f15bab7f_1__bfd55b88e6 cf4c3615944cbc0e06f8d5548a25b5.jpg
https://cimg8.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/600x450-1/80-f1e67ee1_dca6_4b7e_b799_feb1ba5026d5_1__11e4916977 52da2d3bd8365b248ea922bc95e44a.jpg
https://cimg0.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/600x450-1/80-1e0bbbfc_aa25_449b_aba1_8593318b9c00_1__56e32d4c1f b1263bdb644bcfd98b363719b3d95d.jpg
https://cimg1.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/600x450-1/80-63a572bd_1dd6_4143_b2f1_1b01bafe478a_1__cca658581e 68f4155f0c3c0f7484e7b166369188.jpg

Note: This LT5 is set up with Marcs chip for 91 octane :p

Ccmano has a great start on a list of Mechanics that can help keep the ZR-1 alive :handshak:

[Ccmano]

Any more recommendations? I can’t believe that is it...?

Can we get this thread up as a sticky...? So we can continue working on it and make it more visible to newbies.

Thanks
H
:cheers:

[Blackbelt]

Yet to be an owner, and surely a novice in the purest sense, but any experience with West Coast Corvettes in Anaheim, CA?


Sent from my iPhone using Tapatalk


Don't do it

[A26B]

Over the last several years, I have had many customers ranging from novice to the very best & well known LT5 builders. The following is a list of professionals I have encountered, who impressed me with their knowledge & approach to working on the LT5. Some you will recognize & others may be known only to locals. Satisfy yourself before using anyone on the following list.

In order by state;

ARIZONA
Larrys Engine & Marine, 600 W Lester, Tuscon,AZ
520-623-5373

CALIFORNIA
Pfaff Engine Builders, 5362 System Drive, Huntington Beach,CA
714-296-6726

COLORADO
Jerry Price, 3160 N Industrial Way, Castlerock,CO
303-621-5101

GEORGIA
South Georgia Corvette (SGC), 1396 Dillon Rd, Thomasville,GA

ILLINOIS
Haibeck Automotive Technology, 430 W Kay Unit D, Addison,IL
630-458-8427

KENTUCKY
Senior Lotus Engineer & mentor to virtually all of the most well known LT5 shops
Graham Behan
New Concord, KY 42076
(260)701-8860
email: grahambehan@yahoo.com

MINNESOTA
Doug Rippie Motorsports (DRM), 412 Pacific, Waverly,MN
763-658-6109

PENNSYLVANIA
JWC Performance, 605 Guilford Ave, Chambersburg,PA
301-991-6991

TEXAS
Henderson Performance Technologies (HPT),1660 Loop 337, New Braunfels,TX
830-620-1117

VIRGINIA
Evolution Motorsports, 88 le way Dr, Ste 123, Fredricksburg,VA
540-737-8779

WASHINGTON
Scott Carlson, Benchmark Auto, 8248 NE SR 104, Kingston, WA
360-297-6812

[Ccmano]

Over the last several years, I have had many customers ranging from novice to the very best & well known LT5 builders. The following is a list of professionals I have encountered, who impressed me with their knowledge & approach to working on the LT5. Some you will recognize & others may be known only to locals. Satisfy yourself before using anyone on the following list.

In order by state;

ARIZONA
Larrys Engine & Marine, 600 W Lester, Tuscon,AZ
520-623-5373

CALIFORNIA
Pfaff Engine Builders, 5362 System Drive, Huntington Beach,CA
714-296-6726

COLORADO
Jerry Price, 3160 N Industrial Way, Castlerock,CO
303-621-5101

GEORGIA
South Georgia Corvette (SGC), 1396 Dillon Rd, Thomasville,GA

ILLINOIS
Haibeck Automotive Technology, 430 W Kay Unit D, Addison,IL
630-458-8427

KENTUCKY
Not real sure about this guy, but they say he "wrote the LT5 book"
Graham Behan, KY
email only : grahambehan@yahoo.com

MINNESOTA
Doug Rippie Motorsports (DRM), 412 Pacific, Waverly,MN
763-658-6109

PENNSYLVANIA
JWC Performance, 605 Guilford Ave, Chambersburg,PA
301-991-6991

TEXAS
Henderson Motorsports,1660 Loop 337, New Braunfels,TX
830-620-1117

VIRGINIA
Evolution Motorsports, 88 le way Dr, Ste 123, Fredricksburg,VA
703-339-0999

WASHINGTON
Scott Carlson, Benchmark Auto, 8248 NE SR 104, Kingston, WA
360-297-6812


Fantastic list! Thanks Jerry!
H
:cheers:

[93RubyZ]

I think it's been over ten years ago or so, but I worked on a project that included preparing a list of "ZR-1 shops." My research was based pretty much solely on the inputs from members of this forum as well as those from Corvette Forum and possibly whatever else I was able to find on the web. There was no confirmation done on the validity of the recommendations and this is over ten years old so it's possible some of these shops no longer exist, but here is the list (take it for what it's worth -- this is not a personal recommendation from me as I have only personal experience with one shiop on this list -- ZR51/Bill Boudreau, who I would highly recommend):

Name, Location, Phone, Website
Bank's Chevrolet, Concord, NH 603-224-4055
Brady's High Performance, Willow Street, PA 717-283-0056
Ebert's Engine Service, Abita Springs, LA 985-960-2483
Freedom Cars, Nashville, TN 615-254-5252
Guldstrand Motorsports, Burbank, CA 818-558-1499 http://www.guldstrand.com (http://www.guldstrand.com/)
Haibeck Automotive Technology, Addison, IL 630-458-8427 http://www.zr1specialist.com (http://www.zr1specialist.com/)
Henderson Performance Technologies, New Braunfels, TX 210-867-6286 http://www.hendersonperformance.com (http://www.hendersonperformance.com/)
Jim Watson Performance Concepts, Lawrenceville, GA 770-978-7400
Lingenfelter Performance Engineering, Inc., Decatur, IN 260-724-2552 http://www.lingenfelter.com (http://www.lingenfelter.com/)
Pacific Northwest ZR-1, Vancouver, WA 206-755-0976 http://www.pnwzr1.com (http://www.pnwzr1.com/)
Pine Belt Chevrolet, Eatontown, NJ 732-542-1000
Purifoy Chevrolet, Ft. Lupton, CO 303-659-8311
South Georgia Corvette, Inc., Thomasville, GA 229-226-4447
SS Racing, Dallas, TX 972-519-3553
The Vette Doctors Inc., Amityville, NY 631-841-0779 http://www.thevettedoctors.com (http://www.thevettedoctors.com/)
Tony's Corvettes, Gaithersburg, MD 301-869-7110
ZR51 Performance, Cave Creek, AZ 602-319-6575 http://www.zfdoc.com (http://www.zfdoc.com/)
Auto Masters, Bowling Green, KY 270-842-0454

[Ccmano]

Thanks! Another great help for the quest to find competent shops. I’ll do some checking and comparison to the current list.

Also, We still need to get this list as a sticky...
H
:cheers:

[Ccmano]

Is anyone familiar with Northstar Automotive in Mountainview CA?

https://www.northstarauto.com

H
:cheers:

[A26B]

WARNING!! Eberts Engine Service results in a strong warning from Norton Internet Security. Do not click this link, especially if you do not have Internet Malware Protection.

Also,
AutoMasters of Bowling Green weblink is no longer viable. Jim VanDorn, shop owner, passed away & Automasters is closed.

South Georgia Corvette URL is not working. Aaron Scott/South Georgia Corvette is on Facebook.



I think it's been over ten years ago or so, but I worked on a project that included preparing a list of "ZR-1 shops." My research was based pretty much solely on the inputs from members of this forum as well as those from Corvette Forum and possibly whatever else I was able to find on the web. There was no confirmation done on the validity of the recommendations and this is over ten years old so it's possible some of these shops no longer exist, but here is the list (take it for what it's worth -- this is not a personal recommendation from me as I have only personal experience with one shiop on this list -- ZR51/Bill Boudreau, who I would highly recommend):

Name, Location, Phone, Website
Bank's Chevrolet, Concord, NH 603-224-4055
Brady's High Performance, Willow Street, PA 717-283-0056
Ebert's Engine Service, Abita Springs, LA 985-960-2483 http://www.acsvette.com (http://www.acsvette.com/)
Freedom Cars, Nashville, TN 615-254-5252
Guldstrand Motorsports, Burbank, CA 818-558-1499 http://www.guldstrand.com (http://www.guldstrand.com/)
Haibeck Automotive Technology, Addison, IL 630-458-8427 http://www.zr1specialist.com (http://www.zr1specialist.com/)
Henderson Performance Technologies, New Braunfels, TX 210-867-6286 http://www.hendersonperformance.com (http://www.hendersonperformance.com/)
Jim Watson Performance Concepts, Lawrenceville, GA 770-978-7400
Lingenfelter Performance Engineering, Inc., Decatur, IN 260-724-2552 http://www.lingenfelter.com (http://www.lingenfelter.com/)
Pacific Northwest ZR-1, Vancouver, WA 206-755-0976 http://www.pnwzr1.com (http://www.pnwzr1.com/)
Pine Belt Chevrolet, Eatontown, NJ 732-542-1000
Purifoy Chevrolet, Ft. Lupton, CO 303-659-8311
South Georgia Corvette, Inc., Thomasville, GA 229-226-4447 http://www.sgvette.com (http://www.sgvette.com/)
SS Racing, Dallas, TX 972-519-3553
The Vette Doctors Inc., Amityville, NY 631-841-0779 http://www.thevettedoctors.com (http://www.thevettedoctors.com/)
Tony's Corvettes, Gaithersburg, MD 301-869-7110
ZR51 Performance, Cave Creek, AZ 602-319-6575 http://www.zfdoc.com (http://www.zfdoc.com/)
Auto Masters, Bowling Green, KY 270-842-0454 http://www.automastersofbg.com (http://www.automastersofbg.com/)

[Ccmano]

I know this might be a sore subject for some but...

Is Jeff Flint still active with Pacific Northwest ZR-1 near Seattle?
H
:cheers:

[93RubyZ]

Thanks for the warning! I edited my post to remove those links. I just copied and pasted what I had from years ago and didn't check the links before posting.

[haber rj]

Anyone know of any ZR1 shops in Southern Ontario Canada that can work on our cars.

[haber rj]

I had lunch with Aaron Scott from South Georgia Corvettes a week ago and I am happy to announce that South Georgia Corvettes is open and back in business. After a brief closing for personal reasons Aaron assured me that he was back and eager to provide whatever services is needed to the Corvette community. He will be updating his website shortly and his contact number ls 1-229-403-7009. He is at his original location in Thomasville Georgia. I do believe this is good news for the Vette community in and around the southern United States.

[Ccmano]

I had lunch with Aaron Scott from South Georgia Corvettes a week ago and I am happy to announce that South Georgia Corvettes is open and back in business. After a brief closing for personal reasons Aaron assured me that he was back and eager to provide whatever services is needed to the Corvette community. He will be updating his website shortly and his contact number ls 1-229-403-7009. He is at his original location in Thomasville Georgia. I do believe this is good news for the Vette community in and around the southern United States.

That’s great news! I’ve updated the listing on the first page. Let us know when the website is up and what the url is.
H
:cheers:

[Bob Eyres]

I second the opinion that Aaron Scott is a first class Corvette (LT5) mechanic.
And a good guy too. I was on my way to BG for the "Gathering", one time way back in the last century. I had a failure in the ZF6, (long story), and limped in to Aaron's shop. Within a couple of hours he popped in a spare ZF6 that he had in the shop, and shipped my trans out for a rebuild. I got to Bowling Green on time, and then home with no problem. He let me use the trans until mine came back. Great guy.
A word of warning for any shop listed here though. Many of these places have had "up and down" reputations over the years. Because of staff changes, and because of the fact that the LT5 is, in many ways an "orphan engine", not the "latest and greatest" anymore, But mainly because their reputation depends on the personal integrity of one individual, and that can vary over the years for multiple reasons. One of the shops listed, rated at the very highest level by many , gave me the most horrendous service ever. But they have obviously cleaned up their act since, and I don't think it's fair to criticize after a long time period. When in doubt, ask for current opinion from the guys on this list.

BTW, one more shop to mention, in Florida, "Eismann's Corvette Center" here in Jupiter. They've been building, restoring, and servicing Corvettes for more than forty years. I don't go there regularly any more because of high labor costs, but they do know their Corvettes, and LT5's, since day one.

[Ccmano]

Canada Shop added...
H
:cheers:

[Tripler]

Canada Shop added...
H
:cheers:
That's awesome . Thankyou . Dave is an amazingly nice guy . Fun thing about Dave is that he and his son do tractor pulls as a hobby . These tractors are lawn tractors lol and we plan to attend one of these events . Can you imagine a lawn tractor pushing close to 80 or more hp lol . Some run nitrous . From the factory they were 25hp at the most .
Hopefully nothing serious goes wrong with our Z but we have Dave close by if needed.
;)

[Helium3]

Just wanted to say thanks for posting the list. Didn't know there was a LT5 shop out by Poulsbo, WA on the tier 1 list no less.



I visited Tony's Corvette last summer while getting another vehicle worked on down the street. He seemed a little hesitant to do anything other than basic bolt-ons. He even had a 91 ZR-1 sitting out that needed a good home. He seems to be more invested with newer Vettes and restoring the classic Gen 1 and 2s.


My experience with Corvette Mike wasn't great either, but just some email communication. I was looking for a Mosler MT900, ended up contacting Warren Mosler directly.


I'm looking forward to GM coming out with the DOHC turbo engines for the upcoming Corvettes and Cadillac's. That may increase the shops that will work on our older DOHC LT5 motors.

[rkreigh]

The WAZOO LT5 certifying process straight forward and starts with a critical evaluation of a candidate’s skills on the BBQ grille. Next up is stocking and maintaining the beer cooler. 21st and final step is cam timing while blindfolded with one arm tied behind the back.


Sent from my iPhone using ZR-1 Net Registry (http://r.tapatalk.com/byo?rid=90383)




Although very humble the Wazoo guys have built several engines, pulls and installs included, numerous injector plenum pulls, clutches trannys, and just about anything you can think of taking apart with few exceptions.


I'd wager that even with a break for a brew or two and pizza many hands make light work and the price of admission is a smile, a handshake, and a desired to get your hands dirty. Highly recommend it.


A Wazoo graduate is Demps who went "all in" and has one of the nicest shop in the areas. Phil is one of the most advanced engineers I know and has invested much of his time into preserving and improving his Z which is quite spectacular.


I hope to sneak a few more ponies out of the LSV. I heat cycled it a few too many times and blew a rad hose and soon after a head gasket. Should have parked it but it got hot a few times about a year ago. Fast forward, it shot some water out the $6 so it was time to tear it down. Mostly from what I learned hands on at wazoo I went solo on the engine pull and took the engine straight to Demps. We also work with Lloyd who does some quality machine work and knows his way around liners and honing and does lots of dohc ford work so he's not afraid of a few extra valves.


As to the post above. I believe Aaron Scott is back in business in Ga.


Although I haven't been up there in a while


Vette Doctors mostly doing late model stuff but know there way around an LT5


Ron has some builders in Las Vegas, of course Jerry's Gaskets in Ok City, and there are many more.


Good thread.:cheers::dancing:Eagle:

[rkreigh]

Just wanted to say thanks for posting the list. Didn't know there was a LT5 shop out by Poulsbo, WA on the tier 1 list no less.



I visited Tony's Corvette last summer while getting another vehicle worked on down the street. He seemed a little hesitant to do anything other than basic bolt-ons. He even had a 91 ZR-1 sitting out that needed a good home. He seems to be more invested with newer Vettes and restoring the classic Gen 1 and 2s.


My experience with Corvette Mike wasn't great either, but just some email communication. I was looking for a Mosler MT900, ended up contacting Warren Mosler directly.


I'm looking forward to GM coming out with the DOHC turbo engines for the upcoming Corvettes and Cadillac's. That may increase the shops that will work on our older DOHC LT5 motors.


let us help you out with the car. Most folks have moved on because lt5 volume is low and you gotta eat. you are in a hot bed of enthusiasts that can do whatever you need from stock maint to 700 +

[haber rj]

I just wanted to bring to the forms attention that I spoke with Aaron Scott today from South Georgia Corvettes and he confirmed to me again that he is open for business. His only contact number is 299-403-7099 at this time which is his cell phone.

[Ccmano]

I just wanted to bring to the forms attention that I spoke with Aaron Scott today from South Georgia Corvettes and he confirmed to me again that he is open for business. His only contact number is 299-403-7099 at this time which is his cell phone.

Cool, so the 299-403-7009 number we have listed is not correct?
H
:cheers:

[haber rj]

Sorry about the typo baby sitting the grandson the number is 299-403-7009, thank you for catching this.

[Ccmano]

Just realized Pepmier Engine Development in Indiana was not on the list. That has now been updated.

Any other submissions?
H
:cheers:

[lfalzarano]

Yeah, Corvette Masters Inc.
8615 US-17, Maitland, FL 32751

407-831-3990


Sent from my iPhone using ZR-1 Net Registry (http://r.tapatalk.com/byo?rid=90383)

[Ccmano]

Yeah, Corvette Masters Inc.
8615 US-17, Maitland, FL 32751

407-831-3990


Sent from my iPhone using ZR-1 Net Registry (http://r.tapatalk.com/byo?rid=90383)

Thanks! However Corvette Masters is already on the list. But keep those recommendations coming.
H
:cheers:

[precast1]

What’s the story on South Georgia Corvette? Still in business? They did a lot of Z work 10years ago.
H
:cheers:South Georgia Corvette is alive and well Aaron Scott is working on my car right now.

He has a beautiful garage in Thomasville, Ga At the current time he has 8 or 9 cars in the shop. The quality of his work is unbelievable. He will not do something that isn't done to a very high standard.

He is also a very nice guy and has no problem sharing his knowledge.

Please if your anywhere close just go check out his shop you will be nothing but impressed.

Thank you,

Tom

Sent from my SM-G950U using ZR-1 Net Registry mobile app (http://r.tapatalk.com/byo?rid=90383)

[Ccmano]

South Georgia Corvette is alive and well Aaron Scott is working on my car right now.

He has a beautiful garage in Thomasville, Ga At the current time he has 8 or 9 cars in the shop. The quality of his work is unbelievable. He will not do something that isn't done to a very high standard.

He is also a very nice guy and has no problem sharing his knowledge.

Please if your anywhere close just go check out his shop you will be nothing but impressed.

Thank you,

Tom

Sent from my SM-G950U using ZR-1 Net Registry mobile app (http://r.tapatalk.com/byo?rid=90383)

We have heard this was the case. Your the first to confirm.
Thanks
H
:cheers:

[precast1]

We have heard this was the case. Your the first to confirm.
Thanks
H
:cheers:Picked up the car yesterday from South Georgia Corvette, Aaron Scott replaced the injectors and changed all fluids. Burned a new chip. Took the car on an extensive test drive. Car was spotless cleaner than when I dropped it off. Just got done driving it this afternoon 94 degrees here today got to 7000 rpm immediately. Ran it hard for 45 minutes never over 5/8 on the heat gauge. Car was done on time as promised. His shop is neat and beautiful. Shared the pictures with me on the record setting run of 24 hours with Tommy Morrison. He will be doing some complete builds for me very soon. Knows everying there is to know about the ZR1 as he was there at the start. If your with in a days travel bring your car to him if you want it done right. By the way the charges for all he did was very reasonable a bit less than I expected which is always a nice surprise.

Sent from my SM-G950U using ZR-1 Net Registry mobile app (http://r.tapatalk.com/byo?rid=90383)

[Ccmano]

Picked up the car yesterday from South Georgia Corvette, Aaron Scott replaced the injectors and changed all fluids. Burned a new chip. Took the car on an extensive test drive. Car was spotless cleaner than when I dropped it off. Just got done driving it this afternoon 94 degrees here today got to 7000 rpm immediately. Ran it hard for 45 minutes never over 5/8 on the heat gauge. Car was done on time as promised. His shop is neat and beautiful. Shared the pictures with me on the record setting run of 24 hours with Tommy Morrison. He will be doing some complete builds for me very soon. Knows everying there is to know about the ZR1 as he was there at the start. If your with in a days travel bring your car to him if you want it done right. By the way the charges for all he did was very reasonable a bit less than I expected which is always a nice surprise.

Sent from my SM-G950U using ZR-1 Net Registry mobile app (http://r.tapatalk.com/byo?rid=90383)

That’s great news, thanks for the report.
H
:cheers:

[ZuggZR1]

Do we know if any in the Raleigh, NC area who is a respectful LT5 ZR1 mechanic if I should need one. I have a C4 1990 ZR1 DRM 500 Vette

[lfalzarano]

I have always resorted to Hendrick Chevrolet in Cary. They have a few older mechanics that are good. I usually, let them diagnose the problem (if it isn’t obvious to me) and then hunt down the part on the Internet. They’ve installed my water pump and alternator I bought.

If it is running OK, bring it to Aaron Scott at South Georgia Corvettes. About 5 hours from here. Stay in the left lanes in SC, because 95 is terrible in that State!


Sent from my iPhone using ZR-1 Net Registry (http://r.tapatalk.com/byo?rid=90383)

[Prasutagus]

Any thoughts on Austin Corvette? I took my C6 there when I had it and had a good experience. They seem to work on a lot of C4s but not sure about ZR-1s.

Henderson is right down the road in New Braunfels but if I had a shop an Uber ride away from me it would help me feel more confident in my decision to buy a Z :)

[Ccmano]

Any thoughts on Austin Corvette? I took my C6 there when I had it and had a good experience. They seem to work on a lot of C4s but not sure about ZR-1s.

Henderson is right down the road in New Braunfels but if I had a shop an Uber ride away from me it would help me feel more confident in my decision to buy a Z :)

Crossed Flags in Magnolia comes highly recommended but probably not a Uber ride away for you.
H
Crossed Flags Performance, 36675 High Meadow Industrial Lane, Magnolia, Texas. 77355, 832-748-1286, http://www.crossedflagsllc.com/ sschroder@crossedflagsllc.com

[EvanZR1]

Having Corey in New Braunfels and Steve (Crossed Flags) in Magnolia is about as good as it gets. Steve has an enclosed trailer and can do pickup/delivery (for a charge of course), but is well worth it to not have to deal with it. C4 ZR-1s are fairly reliable once they are in a good state and as long as you exercise them regularly. I can definitely attest that Steve @ Crossed Flags does great, thorough work and would take care of you.

[Zrracer]

IMHO
Graham Behan should have his own special status above all the rest. His depth of knowledge with the LT5 is far beyond anyone else. From being involved with design to modification I can not think of anyone who comes near his depth of understanding and attention to detail. I am sure many shops here have called him for information.
That is where my car is and I know I have nothing to worry about. He even Repaired pieces from another shops work. Found all the missing parts I did not get.fixed damaged electrical fx3 and the like.
He is the guy. He is worth the drive.
Robin

[haber rj]

Where is he located

[Zrracer]

KENTUCKY
Graham Behan, KY
email only : grahambehan@yahoo.com
Not real sure about this guy, but they say he "wrote the LT5 book" This is of course a joke. Graham was a senior engineer for Lotus who supervised the LT5 development into a production engine. He did, literally write the book & has mentored virtually every top tier shop listed here.

[Ccmano]

KENTUCKY
Graham Behan, KY
email only : grahambehan@yahoo.com
Not real sure about this guy, but they say he "wrote the LT5 book" This is of course a joke. Graham was a senior engineer for Lotus who supervised the LT5 development into a production engine. He did, literally write the book & has mentored virtually every top tier shop listed here.

In the ZR-1 world Graham is a legend. Better contact info so we can send more work his way (assuming he wants it) would be appreciated.
H
:cheers:

[Zrracer]

I don’t know if he wants his number released. I would suggest you contact him via email and ask. I don’t want him mad at me while he has my car😇

[precast1]

South Georgia Corvette, Aaron Scott owner. Arron worked on my car just before the C4 Gathering this year. New injectors, hot chip, all fluids changed and a general check over so I could enjoy the trip. This shop is a Tier 1 shop plus. Aaron is on of a few shops that fabricated a twin turbo LT5. He knows the LT5 inside and out. On numerous occasions GM top brass has not only inspected his shop. Seen all his cars but drove the twin turbo. If you just need maintenance or a high performance ZR1 save yourself a lot of aggravation and talk to Aaron.
To top it all Aaron is a really nice guy.

Sent from my SM-G950U using ZR-1 Net Registry mobile app (http://r.tapatalk.com/byo?rid=90383)

[Bob Eyres]

Aaron Scott is a first class ZR-1 tech, and a great guy.
Top this- On a trip from South Fla. To the Gathering in BG, I had problems with my ZF6 trans. I limped into his shop in S. Georgia thinking I would never make the Gathering. He dropped what he was doing and pulled the trans., shipped it to Bill B. for a rebuild, LENT me a ZF6 he had on the shelf, and got me back on the road again. I got to BG and then home with no problems.
When my trans got back I went up to his shop and he re-installed it. No charge, except for the time to do the trans swaps.
If only I lived closer to South Georgia, no one would touch my car except Aaron Scott.



Sent from my iPhone using ZR-1 Net Registry (http://r.tapatalk.com/byo?rid=90383)

[msmooreZR1]

Looking for someone near Nashville TN. I tried Freedom Cars and number is not in service. I just need some "minor" repairs, mostly help with oil leaks and some general maintenance.

Any suggestions appreciated.


Thanks!

[davidijaxson]

I stopped by DMS Corvette in Garland, TX on Tuesday. They dont do any LT5 work currently.

Sent from my SM-G975U using Tapatalk

[Ccmano]

I stopped by DMS Corvette in Garland, TX on Tuesday. They dont do any LT5 work currently.

Sent from my SM-G975U using Tapatalk

Thanks for the update. They have been removed.
H
:cheers:

[Z51JEFF]

Why not start a registry of knowledgeable owners that can help others that might live in the area,I work on my car and don’t might helping somebody with a problem or knowledge.

[Ccmano]

Why not start a registry of knowledgeable owners that can help others that might live in the area,I work on my car and don’t might helping somebody with a problem or knowledge.

That’s an interesting thought Jeff. The concept of a “Mentor” program has been discussed. It would be interesting to see what kind of traction something like that would have. Something to ponder...
H
:cheers:

[tf95ZR1]

MANY years ago (15?) a membership booklet was distributed.
Names, addresses, phone numbers, tags. etc.
But now a days, maybe all don't want that info disseminated.

[32valvZ]

Id be willing to help out in my area.(South/West Colorado) I am by no means an expert, but I was a mechanic many years ago with a associates from a Tech school in Denver bought out by Lincoln Tech now I believe.

I have many tools, air and a Kwik Lift in my garage. Ive had only 2 ZR-1s now, but (9 Vettes total) and have really learned allot from this forum and by working on them.

Like I said, not a professional any more, a hobbyist, but willing to help where I can.

[Erik]

Looking for someone near Nashville TN. I tried Freedom Cars and number is not in service. I just need some "minor" repairs, mostly help with oil leaks and some general maintenance.

Any suggestions appreciated.


Thanks!

Did you ever find anyone?

[haber rj]

Aaron Scott at South Georgia Corvettes has a new phone number. The new number is 229-224-2919

[Ccmano]

Aaron Scott at South Georgia Corvettes has a new phone number. The new number is 229-224-2919

Thank you, it has been updated.
H
:cheers:

[Erik]

Anyone know a decent shop in the Charlotte, NC area?

[Crusin]

Good post letting ZR-1 owners where to locate shops that work on the LT5's. I have been to Haibeck in Addison Illinois, and he certainly knows the ZR-1 inside and out. I wasn't aware of the shop in Port Perry Ontario, thanks for the info. May possibly selling and purchasing a 2020 Corvette. Last car for me might as well go all the way. Happy motoring all.

[Mikey]

Anyone know a decent shop in the Charlotte, NC area?

Innovation Performance in Pinehurst/Aberdeen NC. Not LT5 but anything else automotive and they know Corvettes well. Ask for Jon or Crimson. They also know everyone in the business in NC and will point you in the right direction if they can't help.

[Mikey]

Looking for someone near Nashville TN. I tried Freedom Cars and number is not in service. I just need some "minor" repairs, mostly help with oil leaks and some general maintenance.

Any suggestions appreciated.


Thanks!

Moving to the area soon and can maybe help. I have a lift and do my own work.

[lmcptman@gmail.com]

Updated...

I’ll ask again, Does anyone have a status on the following shops? All of these were once top notch LT5 Shops.

South Georgia Corvettes, Thomasville, GA.
Doug Rippie, Waverly, MN.
Lingenfelter Performance, Decatur, Indiana.

For tier two, any new info on Vette Doctors in NY or Tony’s Corvettes on MD?

Based on some internet searches...

South Georgia Corvettes, Appears to be out of business.
Doug Rippie, Still shows an LT5 package but no maintenance or repair.
Lingenfelter Performance, no reference to anything C4 let alone LT5.
Vette Doctors, Shows an LT5 package, possible maintenance and repair. Is known to work on Z’s.
Tony’s Corvettes, no specific LT5 reference. Is known to work on Z’s.


Vette Doctors does work on Our cars, bring my Z there whenever it needs work.
Excellent work

[lmcptman@gmail.com]

Looking for someone in my area that is willing to work on ZR1. I am located on Long Island and currently use Vette Doctors, his work is fine but the wait time is crazy. Looking for an alternative local tech who understands these cars.

[Atari_Prime]

SoCal


Pfaff Engineering
Location: Huntington Beach
Notes: Does not work on stock ZR-1s. Can assist with modding and increasing the HP only.



JD Corvette
Location: Bellflower
Notes: They are dedicated to solely working on Corvettes. Claim they have worked on about 8-10 C4 ZR-1s in the last couple of years.

Powerhouse Racing (specifically Edwin)
Location: Lancaster (but does house calls in LA and OC)
Notes: Seems like a nice guy, don't know a lot about him other than what the forums mention.

[mlipmd]

I also have to give kudos and praise to Aaron Scott at South Georgia Corvettes in Thomasville GA. I had my car there for a few days for various things and when I drove home it was a completely different and much improved car. He is very gracious and a genuinely nice guy and is very knowledgeable about the ZR-1-1 and LT5 as well as every other Corvette, and even Vipers if you're into those. He can do any routine servicing and repairs as well as any performance mods you want without hesitation, having built many high performance engines that would blow your mind. A highly recommended shop and I will be back when needed and might even just go back to visit and say hello. It's understandable why people come from so far away for him to work on their cars.

[davidijaxson]

I called Steve Schroder at Crossed Flags a few weeks ago to see about having some work done and it appears he is moving.

[rkreigh]

Looking for someone in my area that is willing to work on ZR1. I am located on Long Island and currently use Vette Doctors, his work is fine but the wait time is crazy. Looking for an alternative local tech who understands these cars.


unfortunately folks are moving on and working on the new vettes to pay the bills. Unless super urgent I'd wait!! I bought my car from Larry Merow rest his soul and vette dr took very good care of the LSV while up in Long Island


Call Ramp chevy where vt dr came from and Carmen from Vet Dr and I'm sure if they can't take care of it they would refer you.


I'm in alex va, what do you need done???

[jss06c6]

I called Steve Schroder at Crossed Flags a few weeks ago to see about having some work done and it appears he is moving.David is correct. I just completed my last project here in Texas. My wife and I are headed to Pagosa Springs, CO. We are building there on some property we own. Will take some time to effect the move, but I need to get our house ready to list so my time is consumed.

Pagosa Springs is not a reasonable location for a performance shop, so my role going forward would be consultative.

I've had the great pleasure and blessing to work on many C4'S over the past 4 years, developing lifelong friendships with many owners. They are truly unique and very few shops out there will try to learn how to tune and maintain them. I absolutely love the "real" LT-5! My '91 will forever remain with me until I give it to my son someday.

Last C4 project involved complete LT-1 rebuild after it spun #6 rod bearing.. the former "builder" put a stock flexplate (externally balanced) on an internally balanced rotating assembly! Balance was off by 84 grams! Finding competent shops to work on the Gen2 SBC family and our LT-5 is getting very scarce..

Thanks and Warmest Regards,

Steve Schroder
Owner
Crossed Flags Performance, LLC17121

Sent from my SM-G950U using ZR-1 Net Registry mobile app (http://r.tapatalk.com/byo?rid=90383)

[rkreigh]

IMHO
Graham Behan should have his own special status above all the rest. His depth of knowledge with the LT5 is far beyond anyone else. From being involved with design to modification I can not think of anyone who comes near his depth of understanding and attention to detail. I am sure many shops here have called him for information.
That is where my car is and I know I have nothing to worry about. He even Repaired pieces from another shops work. Found all the missing parts I did not get.fixed damaged electrical fx3 and the like.
He is the guy. He is worth the drive.
Robin

Amen~! some of my best times were hanging with Graham after John passed. Graham has forgotten more than we'll ever know and has built the lt5 in the most amazing configurations. Riding around with Will in his TT 385 ruined me. Graham, now that you aren't with LPE, can you do more TT LT5s??? I've punched up the LS engines but they just don't have the moxy and sex appeal of the lt5

I can see graham mastering the lt6 as he's an engineer ameritus and can figure it out and make it better, regardless of what it is.

Graham, hope to see you again soon, the LSV needs love.

[grahambehan]

Hi Ron, long time. Thought you just had the LSV re done?
No limits on TT cars, just time.
Graham

[rkreigh]

LSV still isn't done. Damn shame too as I miss driving it.

another GB TT is just what the Dr ordered!!!

I'm working on 3 vettes right now and none of em run. At least they will all be fast when done!

just picked up a honey of a c5 with a built lsa engine with hard core callies internals (416) Upgrading that one to a D1X procharger

the LSV, engine is together but the top end needs refinishing

TTiX TT c5 Z06, getting new engine and clean up.

Again having a bit of ZR-1 DTs as it's been a while.

[ddiblasio]

This is great information.
I recently moved to central VA and now have a place I can go to within an hour of+/- from me.
thank you

[dredgeguy]

For those in NJ you need to add Conte's Corvettes in Vineland, NJ
In MD, Gallant's Automotive in Bel Air, MD. The owner Rob Metzger was a ZR-1 certified mechanic back in the day. He now owns his own GM and Corvette Performance Center

[precast1]

I also have to give kudos and praise to Aaron Scott at South Georgia Corvettes in Thomasville GA. I had my car there for a few days for various things and when I drove home it was a completely different and much improved car. He is very gracious and a genuinely nice guy and is very knowledgeable about the ZR-1-1 and LT5 as well as every other Corvette, and even Vipers if you're into those. He can do any routine servicing and repairs as well as any performance mods you want without hesitation, having built many high performance engines that would blow your mind. A highly recommended shop and I will be back when needed and might even just go back to visit and say hello. It's understandable why people come from so far away for him to work on their cars.Aaron is worth the drive. He can build anything.


Sent from my SM-G986U using ZR-1 Net Registry mobile app (http://r.tapatalk.com/byo?rid=90383)

[ZrErik]

I made my purchase a few months ago and was pleasantly surprised (and lucky) to find Evolution Motorsports in Fredericksburg VA 3 miles from me.

Dempsy knows his stuff, my purchase was pretty squared away already, but he has tightened it up to perfect. Glad to have them close.

[We Gone]

Aaron is worth the drive. He can build anything.


Sent from my SM-G986U using ZR-1 Net Registry mobile app (http://r.tapatalk.com/byo?rid=90383)


Just talked with Aaron last week, We spent about an hour catching up, I have know him over 20 years. he is back in business and 100% committed to the ZR-1 and keeping the beast alive. :cheers: