Will any year C4 jack work on 92 ZR-1?

[sshort67]

First post by new owner (00289)
First, the ZR-1 forum search has answered most of my many questions and appreciate the willingness of folks to share their knowledge.
Getting the jack out is somewhat of a pain so I looked on e-bay for a factory jack, from the pictures I could not tell if some on the contact surfaces are the same. Will any C4 jack work on the 92. Thanks in advance Steve Short, Fair Grove, Missouri

[secondchance]

First post by new owner (00289)
First, the ZR-1 forum search has answered most of my many questions and appreciate the willingness of folks to share their knowledge.
Getting the jack out is somewhat of a pain so I looked on e-bay for a factory jack, from the pictures I could not tell if some on the contact surfaces are the same. Will any C4 jack work on the 92. Thanks in advance Steve Short, Fair Grove, Missouri

Most likely but not positive. 90-95, I'm pretty sure, will work.

[Ccmano]

Welcome to the forum and the addiction (as I like to say). Can’t answer your question, but tell us more about your Z and yourself....
H
:cheers:

[Mystic ZR-1]

Forget the factory jack and get an inexpensive scissor jack...
Stow it in the the bin behind the passenger seat along with a real
wrench & extension for removing the lug nuts.
Works better and is probably safer to use.
A can of tire goop, a plug kit with wire cutters for pulling out the nail and a cheap 12v compressor ain't a bad idea either. Of course if you rip a hole in the sidewall or tread, you're screwed....

[GOLDCYLON]

The 90-93 jack had an integrated handle in the jack and the 94-96 you had no handle integrated so you had to use the Wheel wrench handle behind the seat however all will fit and all will work. GC