View Full Version : OEM Exhaust Manifolds for sale and other misc parts from '92 ZR-1
I need to clean up my garage and get rid of some parts.
For sale from the '92 ZR-1 I use to own:
1. OEM exhaust manifolds and fittings ***sold***
2. OEM spark plug wires with ZR-1 on them
3. Front and rear leaf springs and misc. mounting hardware. Springs are
marked FHA and RHY1.
4. OEM trailing arm brackets
5. OEM hoses *** Sold***
6. Stock ZF Shifter
7. RD Racing camber brace, ZR-1 specific
8. Rebuilt zf-6 slave cylinder***sold***
9. DRM camber rod brackets
10. ZF-6 speed from 1992 zr-1 Corvette #427 does not hold 3rd gear. New rebuild kit with less than 1000 miles. Just need 3rd gear fixed.
11. Spare upper plenum gasket.
12. Oil pan gasket.
The whole lot for $1200 obo.
Will sell parts individually.
Thank you!
https://s5.postimg.org/jkuimvssz/20170406_204528.jpg (https://postimg.org/image/jkuimvssz/)
https://s5.postimg.org/5omaazwk3/20170406_204245.jpg (https://postimg.org/image/5omaazwk3/)
https://s5.postimg.org/7k92m5leb/20170406_204512.jpg (https://postimg.org/image/7k92m5leb/)
https://s5.postimg.org/oyqynz5eb/20170711_200420.jpg (https://postimg.org/image/oyqynz5eb/)
https://s5.postimg.org/g2g6k1es3/20170711_200429.jpg (https://postimg.org/image/g2g6k1es3/)
pictures added.
Thank you,
https://s5.postimg.org/7vo6sgopf/20170711_200439.jpg (https://postimg.org/image/7vo6sgopf/)
https://s5.postimg.org/4asb98k5v/20170711_200445.jpg (https://postimg.org/image/4asb98k5v/)
https://s5.postimg.org/glg9ds0b7/ZR-1_Leaf_Spring_4.jpg (https://postimg.org/image/glg9ds0b7/)
https://s5.postimg.org/ktb1mj1qr/ZR-1_Leaf_Spring_3.jpg (https://postimg.org/image/ktb1mj1qr/)
https://s5.postimg.org/5w2klioib/ZR-1_Leaf_Spring_2.jpg (https://postimg.org/image/5w2klioib/)
https://s5.postimg.org/kdzrtiftf/ZR-1_Leaf_Spring_1.jpg (https://postimg.org/image/kdzrtiftf/)
Z51JEFF
04-07-2017, 04:01 AM
Hi Karl,you didn't happen to get those coolant hoses from me did you? There was a member I sent a set to that wanted a used set for measurement purposes and I never heard from the guy and forgot who it was.
Hi Karl,you didn't happen to get those coolant hoses from me did you? There was a member I sent a set to that wanted a used set for measurement purposes and I never heard from the guy and forgot who it was.
No, Pete is my witness he did the work on my car. I installed silicone hoses and kept the OEM stuff.
Im no thief!
Sorry Jeff.
Good luck!
Hi Karl,you didn't happen to get those coolant hoses from me did you? There was a member I sent a set to that wanted a used set for measurement purposes and I never heard from the guy and forgot who it was.
And by the way in the future if you have a problem with something or me send me a pm instead of trying to "put me on blast" and make me look bad.
Not cool at all.
Z51JEFF
04-08-2017, 12:09 AM
And by the way in the future if you have a problem with something or me send me a pm instead of trying to "put me on blast" and make me look bad.
Not cool at all.
Hey Chief,I asked a very simple and basic question,how you drag an accusation out of that is beyond me. No apology is needed and none will be offered. Once again,I loaned a set of coolant hoses to somebody on this site that was going to have these made and never heard another thing about it.
Z51JEFF
04-08-2017, 12:14 AM
I IN NO WAY IMPLYED KARL IS A THEIF. Does that fix it?
https://s5.postimg.org/5d22pzmhf/Shifter_3.jpg (https://postimg.org/image/5d22pzmhf/)
https://s5.postimg.org/3wqk7ujkj/Shifter_2.jpg (https://postimg.org/image/3wqk7ujkj/)
https://s5.postimg.org/8tzjf7w5v/Shifter_1.jpg (https://postimg.org/image/8tzjf7w5v/)
-=Jeff=-
04-12-2017, 08:33 AM
And by the way in the future if you have a problem with something or me send me a pm instead of trying to "put me on blast" and make me look bad.
Not cool at all.
Hey Chief,I asked a very simple and basic question,how you drag an accusation out of that is beyond me. No apology is needed and none will be offered. Once again,I loaned a set of coolant hoses to somebody on this site that was going to have these made and never heard another thing about it.
You did not accuse him, but it would have been more polite to drop him a PM then posting on an open forum. I would have reacted the same way Karl did,,
It will all be in the potential buyers interpretatation
BTW Karl, I sent you a PM
bvectra
07-01-2017, 12:34 PM
camber brace and plug wires info price
:salute:
Private messages were sent a couple of days ago.
Ttt
GOLDCYLON
07-05-2017, 11:10 AM
How much for the rebuilt salve cylinder? Who rebuilt it ? Thanks GC
I forget his bame off the top of my head but he is from Iowa and is pretty popular for these rebuilds. Will figure it out later. I think his name is Jim? $100 obo + shipping sounds fair.
G8nightman
07-05-2017, 07:00 PM
Price on camber brace? If not sold?
Sent from my iPhone using ZR-1 Net Registry (http://r.tapatalk.com/byo?rid=90383)
Price on camber brace? If not sold?
Sent from my iPhone using ZR-1 Net Registry (http://r.tapatalk.com/byo?rid=90383)
$200 + shipping and handling.
LGAFF
07-06-2017, 08:12 PM
I forget his bame off the top of my head but he is from Iowa and is pretty popular for these rebuilds. Will figure it out later. I think his name is Jim? $100 obo + shipping sounds fair.
Jim Jandik in New Virginia IA
G8nightman
07-06-2017, 10:20 PM
$200 + shipping and handling.
Do you have a picture?
Sent from my iPhone using ZR-1 Net Registry (http://r.tapatalk.com/byo?rid=90383)
onetinsoldier
07-07-2017, 05:48 PM
Wires still available ? If so price please ! Thanks
GOLDCYLON
07-07-2017, 05:51 PM
I forget his bame off the top of my head but he is from Iowa and is pretty popular for these rebuilds. Will figure it out later. I think his name is Jim? $100 obo + shipping sounds fair.
If it's the smooth painted body vs cast I will take it. Do you have a picture available ? Goldcylon@cox.net
How's $100 shipped ?
Do you have a picture?
Sent from my iPhone using ZR-1 Net Registry (http://r.tapatalk.com/byo?rid=90383)
I will have to take a picture sometime this weekend.
Wires still available ? If so price please ! Thanks
$200 plus s&h
If it's the smooth painted body vs cast I will take it. Do you have a picture available ? Goldcylon@cox.net
How's $100 shipped ?
It is the OEM unit, has some surface rust. I just uploaded pictures at the beginning of the thread.
GOLDCYLON
07-08-2017, 12:14 AM
It is the OEM unit, has some surface rust. I just uploaded pictures at the beginning of the thread.
Ok PayPal ?
GOLDCYLON
07-08-2017, 12:58 AM
pm sent
Karl pm sent and PayPal sent. GC
Do you have a picture?
Sent from my iPhone using ZR-1 Net Registry (http://r.tapatalk.com/byo?rid=90383)
Pictures added.
GOLDCYLON
07-11-2017, 11:22 PM
Karl I received the slave cylinder thanks again GC :cheers:
Karl I received the slave cylinder thanks again GC :cheers:
You are welcome!
Everyone else I still have parts for sale!
BigIke
07-23-2017, 06:02 PM
Karl, how much for the tranny? Might be able to slap my 3rd gear set in there and fix my current disorder... I'm suffering from a 2-year case of NoSecondGearAtAll... It's a horrible affliction, that causes my to do the 1st to 3rd thing...
Sent from my SM-G950U using ZR-1 Net Registry mobile app (http://r.tapatalk.com/byo?rid=90383)
Karl, how much for the tranny? Might be able to slap my 3rd gear set in there and fix my current disorder... I'm suffering from a 2-year case of NoSecondGearAtAll... It's a horrible affliction, that causes my to do the 1st to 3rd thing...
Sent from my SM-G950U using ZR-1 Net Registry mobile app (http://r.tapatalk.com/byo?rid=90383)
Pm sent.
I am suspending my parts for sale until further notice, less the leaf springs.
Thank you.
vBulletin® v3.8.11, Copyright ©2000-2024, vBulletin Solutions Inc.