street / track alignment

[henryr]

i plan on taking the 90 out for a track day at road atlanta.

anyone have a suggestion for an aggressive street / track alignment?

[henryr]

never mind found some links in searches

[Kevin]

there's also a place in the owners kit that tells you the settings

[DRM500RUBYZR-1]

https://www.vbandp.com/instructions/corvette-doc/43-alignment-specs/file.html

Great info!

:cheers:
Marty

[henryr]

danka....

what about lowering this thing a bit ?

[RussMcB]

danka....

what about lowering this thing a bit ?Are you a member of the ZR-1 Registry? If yes, there is a good article in the recent quarterly issue in the Members Only section:

http://www.zr1netregistry.com/MembersOnly/Newsletter.aspx

I bought the commonly available kit with the longer bolts that allow you to lower the rear (my front is low enough so I left it as is).

When are you going to Road Atlanta?

[henryr]

i am not but that is on my list

chin has two upcoming events end of Feb and in March

[mike100]

I would suggest lowering the fronts with coil overs. There aren't very many unmolested ZR-1 front springs left. Don't cut the rubber bushing off of yours to find out you don't like how low it rides or how much softer the preload on the spring gets.

The lowering bolts on the rear are super easy and a half hour job to swap back.