Some Mods before the winter.

[G8nightman]

So I got lucky and found a NOS set of injector housings for a great price $360 on ebay had them sent straight to Lee (LGAFF) since I Bought a spare Plenum and Airhorn from him and wanted to get everything ported. Once Lee finished the porting I got everything powder coated red. My AC compressor also blew on my way to Carlisle so order a new unit straight from Denso along with a dyer and AC lines.
http://i.imgur.com/4vzscE0.jpg?1
http://i.imgur.com/pjwGW2r.jpg
I was ready to do the Plenum pull surprise surprise dirty and grimy also found a mouse nest in the valley and of course the drain was clogged. So removed the Starter Alternator and AC comp Coil Packs and this is what we where left with.
http://i.imgur.com/fu4WzLX.jpg
Time to start cleaning. Results...
http://i.imgur.com/cMiWA2K.jpg

[G8nightman]

After everything was clean started to reinstall everything
http://i.imgur.com/OhHpDfA.jpg
http://i.imgur.com/oNXkYJj.jpg
http://i.imgur.com/ICt9GhT.jpg
http://i.imgur.com/9hjcJ0A.jpg
I didn't want to mess with the TB to much I freshened it up a bit
http://i.imgur.com/hSntrXc.jpg
http://i.imgur.com/5WzG35k.jpg

[G8nightman]

Time to close it up
http://i.imgur.com/x8RGFy1.jpg
Also sourced a Set of Front GS Calipers New Rotors and Pads all around
http://i.imgur.com/gs2K88g.jpg
http://i.imgur.com/cwpJG2p.jpg
Cleaned and painted the rear Calipers
http://i.imgur.com/VVxGG4D.jpg

[G8nightman]

And the final product :-)
http://i.imgur.com/jCdWa7A.jpg
http://i.imgur.com/g86hNhz.jpg
http://i.imgur.com/zc1xcjd.jpg
http://i.imgur.com/PA3MRPv.jpg

Hope you enjoy :fahne:

[XfireZ51]

U should try resizing these pics for easier viewing and not to chew up data.

[G8nightman]

U should try resizing these pics for easier viewing and not to chew up data.
Yes sorry doing that now.

[GOLDCYLON]

where did you source those GS calipers ?

The PC process wont screw up the TB I've had it done.

[Roadster]

George, great job and a good future reference......let us know what the performance increase feels like!!!

[G8nightman]

Thanks Tom It pulls harder I am also running Mark H. Chip so its tuned for the porting and headers.

[G8nightman]

where did you source those GS calipers ?

The PC process wont screw up the TB I've had it done.

I was searching for a bit I found some used and new ones from Vendors but they only had front lefts. So I post a WTB thread in the C$ section in the corvette forums and got a bite for a NOS left and right at a great price :-) it was a fellow ZR1 brother that is selling his car and extra parts.

[jcruz]

uh. WOW. Great job!

[Roadster]

Thanks Tom It pulls harder I am also running Mark H. Chip so its tuned for the porting and headers.

That is good news George, I know there has to be a bigger smile on your face then previously for sure!!! Enjoy the power!!!:cheers:

[ghlkal]

Looks great

I especially like how you detailed the wheels =D>