1990 Power switch

[jrd1990zr1]

Does anyone know how to test a power switch out of the car? There are three pins, I have a complete circuit thru the common pin and one leg with the key on. The other side appears to be open.

Thanks for the advice

[368zr1]

As you can see on the schematic only 2 pins on the Valet/Power Key Switch are used.

When the switch is in Full Power Mode, the Dark Blue/White wire
is connected thru the switch to ground.

http://i135.photobucket.com/albums/q129/88f150xlt/zr1powerswitch.jpg

[90ZR1]

I just had mine re-wired to always have the power on... is what the ZR1 craves!

[jrd1990zr1]

Thank you

As you can see on the schematic only 2 pins on the Valet/Power Key Switch are used.

When the switch is in Full Power Mode, the Dark Blue/White wire
is connected thru the switch to ground.