On pulling front fascia off a 92

[XfireZ51]

My front fascia had a defect when I first bought it, w the passenger side corner having cracked paint. I'm in the process of removing fascia and thought I would ask if anyone else has done this. I've removed all the bolts along the fender well, front air dam, top along the hood (what a PITA, especially the two corner TORX screws). I see that there is a center retainer but can seem to see the bolts from behind. Any hints are welcome.

Thx.

[LGAFF]

FSM has instructions

[XfireZ51]

FSM has instructions
I looked at that. Think I may need to unbolt the side marker lights.

[Z51JEFF]

I looked at that. Think I may need to unbolt the side marker lights.

The side marker lights will cause the edge of the bumper to hang up as you pull the cover off and can't forget the 2 small screws on the bottom of the bumper by the foglight access panels. I've done this job,pretty easy and straight forward.

[XfireZ51]

The side marker lights will cause the edge of the bumper to hang up as you pull the cover off and can't forget the 2 small screws on the bottom of the bumper by the foglight access panels. I've done this job,pretty easy and straight forward.

Thanks. Yeah I got the small screw tucked underneath. It does feel that marker lights need t be undone. Just waiting for a bit warmer weather. Those torx screws at the corners are a PITA. No room between hood and facia to get a wrench in there.

[BigJohn]

Okay!
Doug I didn't say it !

[Mystic ZR-1]

Okay!
Doug I didn't say it !

??????

[BigJohn]

??????



Sawzall

:neutral: