Coil question

[mgbrv8]

I am detecting a minor misfire underload. My injectors have been changed in the past I changed the pumps, plugs and wires just 2k miles ago. I am thinking I have a coil issue sense the coils seem to be original. my car is a 91 with 77k on the clock.

I was wondering what coil people go with my car is stock with the exception of headers and flowmaster exhaust

Dave

[LGAFF]

Don't use Accel, had two on the 91 I am working on short out and blow out a 20 amp fuse; I have had no issues with generics from Autozone or O Reillys

[mgbrv8]

This should work right??



http://www.ebay.com/itm/NEW-GENERAL-MOTORS-HONDA-ISUZU-NEW-ACDELCO-IGNITION-COIL-Premium-Quality-/171952798528?fits=Year%3A1991|Model%3ACorvette&hash=item28092f7b40:g:jG0AAOSwl8NVcdk5&vxp=mtr

[secondchance]

This should work right??



http://www.ebay.com/itm/NEW-GENERAL-MOTORS-HONDA-ISUZU-NEW-ACDELCO-IGNITION-COIL-Premium-Quality-/171952798528?fits=Year%3A1991|Model%3ACorvette&hash=item28092f7b40:g:jG0AAOSwl8NVcdk5&vxp=mtr

That one should work. However, last 3 AC/Delco coils I purchased on Ebay turned out to be made in China. That doesn't mean they are bad. Just that I don't know how long they will be good for...

If you want to take a chance I will sell you 3 brand new in AC/Delco box for $60 including shipping.

[mgbrv8]

Got ya

That one should work. However, last 3 AC/Delco coils I purchased on Ebay turned out to be made in China. That doesn't mean they are bad. Just that I don't know how long they will be good for...

If you want to take a chance I will sell you 3 brand new in AC/Delco box for $60 including shipping.

[A26B]

This should work right??



http://www.ebay.com/itm/NEW-GENERAL-MOTORS-HONDA-ISUZU-NEW-ACDELCO-IGNITION-COIL-Premium-Quality-/171952798528?fits=Year%3A1991|Model%3ACorvette&hash=item28092f7b40:g:jG0AAOSwl8NVcdk5&vxp=mtr



There is another coil that externally looks identical to the correct one for the ZR-1 & it fits all sorts of other vehicles. However, it has a different PN than the ZR-1 specific coil. I can't cite specs right off hand, but I recall that there is a difference in windings/resistance. FWIW, it's always been about 1/2 the price of the ZR-1 specific coil..... just like the one referenced in the link.

I would think long & hard before buying this coil for an LT5, especially since the seller does not state the GM PN in the auction.

[XfireZ51]

MSDs here. Been working for 8 years.

[Fully Vetted]

MSDs here. Been working for 8 years.

Ditto. No issues.

[Z51JEFF]

I had an OEM coil die at less than 8000 miles so might want to rethink that one. I'm running MSDs.