PDA

View Full Version : Could it be Ed's car?


secondchance
12-13-2015, 08:14 PM
I am seeing an fire damaged LT5 engine and a complete SW headers with Corsa exhaust for sale posted by "fparts" based out of Bristol, PA.
Could these be off Ed's car?

http://www.ebay.com/itm/1991-Chevrolet-CORVETTE-LT5-ZR1-Engine-81k-FIRE-DAMAGED-Runs-/371506464570?hash=item567f82c73a:g:X3gAAOSwnipWaxq 2&vxp=mtr

http://www.ebay.com/itm/90-95-Corvette-C4-ZR1-Corsa-Exhaust-System-Mufflers-with-SW-Headers-LT5-/371503344477?hash=item567f532b5d:g:B~gAAOSw8-tWZee~&vxp=mtr

secondchance
12-13-2015, 08:25 PM
Just talked to Ed. These are off Ed's car. Headers and Corsa could be a deal!

Scrrem
12-14-2015, 09:00 AM
Just talked to Ed. These are off Ed's car. Headers and Corsa could be a deal!

I figured that engine was out of Ed's car. Wonder if the heat from the fire would have warped any of the parts?
Rich

secondchance
12-14-2015, 04:18 PM
I figured that engine was out of Ed's car. Wonder if the heat from the fire would have warped any of the parts?
Rich

I would be real leery...

George Maz
12-22-2015, 02:26 PM
Some issues with the arrived condition of this exhaust system.
Seller has responded immediately to my concerns.
My post is withdrawn.

spork2367
03-12-2016, 12:26 AM
I bought an entire salvage ZR1 from Rocky at Contemporary Corvette (FParts) a couple years ago. They were easy to work with. Hope you get things worked out with the exhaust.

George Maz
03-12-2016, 01:57 AM
It arrived shipping battered. Seller responded quickly offering full money-back guarantee & paid return shipping, so I know he's a good guy.
I held onto it, and glad I did. The headers are going into another ZR-1 I just acquired & might swap the Corsa into it later on.

On another note, I just double shipped a brand new high quality case, to fetch a C4 glass top. This is the same type of case/trunk used by studios to transport flat screen monitors. The case took a real beating, glass was ok, but it was the same FedEx route as the Corsa exhaust.

George Maz
03-20-2016, 03:24 PM
Can someone confirm if these SW headers were ever coated, or not?

*Update- reply received, Jet-Hot coated.

dredgeguy
03-23-2016, 09:16 AM
Can someone confirm if these SW headers were ever coated, or not?

*Update- reply received, Jet-Hot coated.

I know Ed had the headers coated. SW sent them out to their coatings people who then drop shipped to Ed