Lt5 stuff Engine parts sale or trade. Must sell.

[Torchred96]

Hi Guys. These are some things I have, all 91 lt5

Prices plus shipping.
--------------------------

Heads $600 per side or $1100 for both..assembled with valves and lifters. powder coated silver in near perfect shape. engine did not smoke on startup or any other time.heads are not ported but have already done the sptv's shafts removed and plugged with dorman plugs, so obviously as you guys know better than I, you will need to run a sptv delete program like i am using from Haibeck, or similar.

oil pan, $225. no sensor included and lower pan has been welded at the belly but doesnt leak. No breaks or distortion around mounting flange.

2 sptv actuators they are both hold vacuum and are functional. $55 for pair plus shipping . SOLD


Stock Cams $500 for all 4..with attached gears. SOLD



Fidanza LT5 aluminum flywheel $200 plus shipping. Was in a parted car and is in really good shape bought from the guy I bought my new engine from in naples. I never installed it (rattle potential scared me off). SOLD



email is best: sirlancair at yahoo dot com cell 305 794 2402
thanks
sam

[FU]

Price for heads and cams shipped to 11702 please.

[XfireZ51]

Frank,

What are you up to??

[Torchred96]

Hi Frank, I'm not sure what it will cost. I don't do this on regular basis. I would say to make some reasonable assumption on shipping cost and whatever the difference is, we can either refund or pay the difference depending on the significance of the margin. I'm not going to cry over $25 over the sum of this purchase. How about 100? I really have no idea.

[5ABI VT]

Im interested in the cams. Will they work as regrinds for a 94?:cheers:

[Torchred96]

Flywheel is sold.

5ABI VT : I have no idea if the cams will work as regrinds. I'd post in "technical" as a question as these guys will let you know in a second.

thank you.

[XfireZ51]

Im interested in the cams. Will they work as regrinds for a 94?:cheers:

Any of the cams will. I believe cam specs were the same but phasing was different.

[FU]

I'm trying to get the money together. Hopefully this will happen asap. In the mean time I'm out.
Life sometimes gets in the way :(

[diamond zr1]

how many miles on the cams and heads? can you send photos?text 509 6712952

[Torchred96]

Frank. There are many people who have given me lots of good advice on this and the other forum over the years, and frankly (pun intended), I wouldn't have been able to have modified screaming ZR-1 if it wasn't for the help I got right here.

I am too familiar with life getting in the way of our toys, and I would be happy to ship you these heads and cams, and you can pay me as you get the opportunity given some reasonable time frame. Someone said this is a brotherhood, and that's what brothers do.

Let me know. You're first in line.

[Torchred96]

Diamond, the car showed 135k miles when I pulled the engine due to the rod knock

http://www.zr1.net/forum/showthread.php?t=24993&highlight=heads

[Torchred96]

Still available.

[5ABI VT]

May have a buyer in need of the entire top end or whatever you have. Seems he suffered a chain failure and damaged the heads and valves etc.

[Torchred96]

Let me know Abi VT, I have everything from the shortblock. Assembled Heads, cams, chains etc. I still haven't taken the short block apart to find the source of the knock in the lower end. But that didn't affect the heads and cams because there is no damage there or to the tops of the pistons, and the sleeves all look good near as I can tell.. IT is amazing to me to be able to still see cross hatching in the 136k mile sleeves.

[Torchred96]

I've gotten a few requests to sell the cams at a lower price than I'm asking. I've decided to stay firm on the prices I have listed and changed the ad to reflect that. Prices are as listed now. I would probably make a deal if someone wants the heads and cams together.

thanks

[Torchred96]

Cams are sold. Pending payment.

Heads, shortblock block and oil pan still available.

Thanks