View Full Version : Lookinjg for some 1990 ZR1 parts
jrd1990zr1
12-05-2006, 10:17 PM
Hi,
Looking for some 1990 OEM parts for NCRS flight judging.
OEM front 3 piece plastic spoiler, no nicks or scrapes (has 1990 date on it)
Black PF 670C oil filter
The two torx head screws that hold the front licence cover on
Rear license plate screws
Any advice on a source would also be appreciated.
Thanks, John
Hammer
12-05-2006, 11:03 PM
Hi,
Looking for some 1990 OEM parts for NCRS flight judging.
OEM front 3 piece plastic spoiler, no nicks or scrapes (has 1990 date on it)
Black PF 670C oil filter
The two torx head screws that hold the front licence cover on
Rear license plate screws
Any advice on a source would also be appreciated.
Thanks, John
Just saw 4 original (I think) ZR-1 filters on Ebay. No Buy it Now so you will have to bid on them. Check them out.
http://cgi.ebay.com/ebaymotors/NOS-BLACK-OIL-FILTER-ZR1-CORVETTE-LT5_W0QQitemZ120061606850QQihZ002QQcategoryZ33661Q QrdZ1QQcmdZViewItem
TommyL
12-09-2006, 10:31 AM
Hi,
Looking for some 1990 OEM parts for NCRS flight judging.
OEM front 3 piece plastic spoiler, no nicks or scrapes (has 1990 date on it)
Black PF 670C oil filter
The two torx head screws that hold the front licence cover on
Rear license plate screws
Any advice on a source would also be appreciated.
Thanks, John
John,
Send your address to me at kito@sympatico.ca and I will send you the 2 front cover screws. :cheers:
guinnessdood
12-12-2006, 12:20 PM
Hi,
Looking for some 1990 OEM parts for NCRS flight judging.
OEM front 3 piece plastic spoiler, no nicks or scrapes (has 1990 date on it)
Black PF 670C oil filter
The two torx head screws that hold the front licence cover on
Rear license plate screws
Any advice on a source would also be appreciated.
Thanks, John
Contact Doug or Colton at Corvette Recycling (sales@corvetterecycling.com)...especially for the small odds and ends...they have parted a few cars lately.
phrogs
01-01-2007, 12:38 AM
Hey send me a email when you get this
I may have your NOS spoliers with 90 dates molded into them.
jrd1990zr1
01-12-2007, 09:29 PM
Thanks everyone for the help. I got everything I need.
For now at least.
vBulletin® v3.8.11, Copyright ©2000-2024, vBulletin Solutions Inc.