PDA

View Full Version : WTB 30MM/26MM sway bars

cvette98pacecar
03-22-2015, 11:07 AM
I know there are at least 10 of you that have 30MM front and 26MM rear sway bars laying around.
I need one of each ASAP.
Pete
03-23-2015, 08:57 PM
Front Hollow:32mm
http://www.summitracing.com/parts/aco-2170/overview/year/1995/make/chevrolet/model/corvette

Rear Hollow;25mm
http://www.summitracing.com/parts/aco-2175/overview/year/1995/make/chevrolet/model/corvette


Front Solid:29mm
http://www.summitracing.com/parts/aco-505/overview/year/1995/make/chevrolet/model/corvette

Rear Solid:25mm
http://www.summitracing.com/parts/aco-698/overview/year/1995/make/chevrolet/model/corvette


Addco will make whatever you want.

Pete
phrogs
03-23-2015, 10:07 PM
what are the stock sizes?
JimZRyd
03-23-2015, 10:15 PM
Unless it's for a dedicated track car, is there much advantage in going with a solid bar vs a hollow bar? Never given it much thought. Always just figured thicker was better. Thanks!
Pete
03-23-2015, 10:16 PM
Stock ZR-1's

1990
Front Hollow:26mm
Rear Solid:24mm

1991-1995
Front Hollow: 26mm
Rear Solid: 26mm

Pete
LGAFF
03-23-2015, 10:30 PM
Wonder if 30MM is the limit for a stock class, as it was offered with the Z51(non-ZR-1)?
cvette98pacecar
03-23-2015, 11:18 PM
Wonder if 30MM is the limit for a stock class, as it was offered with the Z51(non-ZR-1)?

Here is a chart that hib had posted on the Auction Center

http://www.corvetteactioncenter.com/tech/c4/susp_chart.html
cvette98pacecar
03-23-2015, 11:26 PM
Unless it's for a dedicated track car, is there much advantage in going with a solid bar vs a hollow bar? Never given it much thought. Always just figured thicker was better. Thanks!

The 30/26 was the stock size for the R9G race cars as well as all of the Z07 suspension cars. The 32/26 from what Ive read will cause the car to push.
JimZRyd
03-24-2015, 09:49 AM
The 30/26 was the stock size for the R9G race cars as well as all of the Z07 suspension cars. The 32/26 from what Ive read will cause the car to push.

Is that with stock size tires? I've got a set of 345's and waiting on rims. Figured I would have to move up to a bigger size with the increase in rubber. Had to on my C5. What's the thoughts on solid vs hollow?