NOS plenum and original exhaust

[Dean]

Corvette ZR1 ZR-1 LT5 Plenum that has never been on an engine. I had this for years as a spare for my 1991 ZR1 but I no longer have the car. I bought this from the GM proving grounds years ago. $350 + shipping

[SIZE=2][FONT=Arial]Original LT5 ZR1 exhaust removed when the car has less than 5,000 miles on it for aftermarket exhaust. This was removed from a 1991 ZR1. One piece undamaged exhaust from the front to the back. It has been stored in my garage for years. This is the exhaust you need especially if you are doing any NCRS judging with your car. $400. You will have to pick up this or

Both sold.

[cvette98pacecar]

Dean, I will take the plenum. How do you want payment.

[Dean]

I was told this is the secondary throttle solenoid. Still for sale $50.00. Brand new.

Still available 3/16/15

[Dean]

more parts

New Red Seat belts both side together $200
Oil plug gasket $2.00 sold
GM muffler clamps that were on the exhaust of a 1991 ZR1 $5.00 sold

Seat Belts still available 3/16/15!

[Dean]

brand new fuel railings with eight new injectors still in the plastic case they were shipped in for GM $200.00 sold

throttle body gasket new $10.00

Throttle body gasket still available 3/16/15

[Dean]

air dam and sold.

[Jagdpanzer]

I'll take the three pcv tubes, oil pressure sender, two injector relays

[FU]

PM me , power key, and chip price.

[RICKYRJ1]

pm me, prices on the hoses, wires, belt and rear back panel :handshak:

[A26B]

I would like to buy the secondary port throttle vacuum system and secondary port throttle solenoid valve.
Please PM price

[Scrrem]

Pm me a price on the battery cable and what color are the seat belts?
Rich

[GOLDCYLON]

How much for the power steering cap and the injector rails? Also price for the seat belts and color

[GOLDCYLON]

Dean I made you an offer on the PS cap and had a question on the injector rails. You must list the prices for all the items according to the forum rules.

To the folks looking... the seatbelts are Red.

[Dynomite]

Interested in fuel rails...PM price.....shipped to 93291
Do not need the injectors.....just fuel rail with Fuel Pressure Regulator.

Depending on what Daryll has decided ;)

[GOLDCYLON]

Interested in fuel rails...PM price.....shipped to 93291
Do not need the injectors.....just fuel rail with Fuel Pressure Regulator.

Depending on what Daryll has decided ;)

I asked for the fuel rails as well minus the injectors (Great minds) we havent agreed on a price yet or if hes willing to do that as well. Update now I noticed there is a price on it as I asked as a mod for him to post up his prices per the rules. OK I will go for the whole setup at $200 if Dean agrees

However I also think I have closed the deal on the PS cap and the bracket for the air dam but he has to get back with me

[GOLDCYLON]

does anyone know what this brace is for?

The Air Dam. I made an offer for it as well as we already agreed on the PS cap. I will take the fuel rail setup with the injector for $200 if you agree. LMK Dean

[GOLDCYLON]

don't panic i still have to parts and holding for the first person that asked about them below. I just deleted them because I didn't have a price listed per the rules.

I need some help here. I don't remember what this switch or relay was for????


Secondary throttle solenoid

[Dean]

Brand new power switch model with two new keys and knock outs. This is brand new and never been opened. $300.00

Original computer chip from a low mile 1991 ZR1 $75.00 sold

NOS power switch and (2) new keys sold

[Dynomite]

Brand new power switch model with two new keys and knock outs. This is brand new and never been opened. $300.00

Original computer chip from a low mile 1991 ZR1 $75.00

I will take the chip......PM me shipping costs to 93291....and your PayPal.

And I will take the Fuel Rails if Daryll runs out of money ;)

Daryll.....you cannot buy a House with six car garage and have any money left over for Fuel Rails :D

I just had an emergency yesterday and installed my last Fuel Rail under the portable Flood Lights last night to get one of our guys ZR1 running.
Did a 12 minute Plenum Removal after dark under flood lights with NO Injector Housing Coolant Blocked. It took a couple hours to put it back together and fire it up (did some house cleaning under the Plenum). Idled and ran perfectly. Never seen a tighter Secondary Vacuum System....vacuum pump came on for a few seconds and did not hear it again :sign10:

[Dean]

Brand new ZR51 performance C4 Corvette beam plates. These fit manual trans corvettes to strengthen the overall drive line structure. I bought these for my ZR1 but never installed them. See the link below for more information. You will not find these cheaper and brand new with instructions.

$125.00 sold

http://zfdoc.com/c4beamplate.htm

[Dynomite]

Brand new ZR51 performance C4 Corvette beam plates. These fit manual trans corvettes to strengthen the overall drive line structure. I bought these for my ZR1 but never installed them. See the link below for more information. You will not find these cheaper and brand new with instructions.

http://zfdoc.com/c4beamplate.htm

How much for C4 Beam Plates shipped to 93291?

[Dean]

Next things i need to dig out and examine are:


CTP Techline kit with vidoes

Almost ever issue of the ZR1 Legend magazine that Larry used to put out plus the issues that came out after that.

[Dean]

Plug wires are still available. These are for 1, 3, 5 & 7. Two sets for that side. These are brand new from the GM proving grounds with all the clips and shielding on them. These are the original NCRS required ones with all the markings on them saying Corvette LT5 and plug number. $100 for all and I know you can make money on that.

Sold

[Dynomite]

Plug wires are still available. These are for 1, 3, 5 & 7. Two sets for that side. These are brand new from the GM proving grounds with all the clips and shielding on them. These are the original NCRS required ones with all the markings on them saying Corvette LT5 and plug number. $100 for all and I know you can make money on that.


OK Dean.......I will take the plug wires.....I need those original Clips :D
Give me a total for Plug Wires, C4 Beam Plates, and Chip.....plus shipping to 93291.

I will run on the Drivers Side Only to save some gas....:sign10:

Anything else?????
Should I wait ;)

Daryll: If you change your mind on the Fuel Rails let me know..... :p

Cliff

[GOLDCYLON]

Dayum Cliff need to take a road trip to Deans house. You will save on postage lol

Did you get that PM from me ?

[GOLDCYLON]

Next things i need to dig out and examine are:


CTP Techline kit with vidoes

Almost ever issue of the ZR1 Legend magazine that Larry used to put out plus the issues that came out after that.

Folks I have these magazines they are great. Good tech info Cliff I highly suggest you get these for archival purposes I may have some the missing issues

[Dynomite]

Dayum Cliff need to take a road trip to Deans house. You will save on postage lol

Did you get that PM from me ?

Yes....got PM.....but I never give up.....:D

If I take a road trip to Ohio I could also pick up your stuff for you and drop off on way back :sign10:

[Roadster]

Dean, if Cliff passes on the ZR-1 magazines, let me know how much you want shipped to 18976. I would be interested. Thanks.....Tom

[Dynomite]

Dean, if Cliff passes on the ZR-1 magazines, let me know how much you want shipped to 18976. I would be interested. Thanks.....Tom

They are all yours as you like Tom......I like hardware :p

[Roadster]

They are all yours as you like Tom......I like hardware :p

Thanks Cliff, if it works out with Dean, will just be adding to my collection to read now and for my retirement in a few years. God knows, I have enough reading material for a long time......just hoping I last long enough to enjoy reading all the car magazine and books that I have.....:)
Plus hope I can read every article that you have posted, I think that would take me a few years in itself just to absorb your knowledge.....:)
I am sure everyone else also enjoys your detailed writings and photos as I do with what you have accomplished and done, keep up the great work......it is appreciated...:cheers:

[GOLDCYLON]

Dean.. The check is in the mail. Thanks GC :cheers:

[Roadster]

Has anyone heard from Dean lately??? Sent him a PM and posted here about interest in the ZR-1 magazines, but haven't heard back yet!!!

[A26B]

Has anyone received the parts that you have paid for? I have not.

[Dynomite]

It appears Dean was on the forum 8 hours ago.

[Dean]

The first group of parts will be going out tomorrow. i have them all boxed, labeled and in my SUV ready. The next batch will be mid week. I have received payments from everyone but one so far.

[GOLDCYLON]

The first group of parts will be going out tomorrow. i have them all boxed, labeled and in my SUV ready. The next batch will be mid week. I have received payments from everyone but one so far.

Did my check make it yet? It went out last Monday's mail

[Dynomite]

Did my check make it yet? It went out last Monday's mail

Same question for me?.....my check went out last Saturdays mail (March 7th)

[Dean]

I got everyone's check except one and he is mailing it on Friday so we are good. One load of stuff is going out today and the rest this week also.

[George Maz]

I purchased a nos starter from Dean in January, perfect transaction. I've made a second order for more stuff along with another forum member. Thankyou Dean for these smooth transactions.

[Dean]

Five packages went out today with FedEx. :cheers: Three more packages I will be shipping on Wednesday.

[Dean]

Three more boxes where shipped today. That is all of them but one that will ship after payment received. I put the Legend, King of the Hill and Heart of the Beast magazines on Ebay. I don't know what value to put on them and I know I had to put a value to list them on here.

[Dean]

I hope people are getting their stuff by now.

[Jagdpanzer]

Dean,
Parts showed up today and everthing looks in fine shape.

[Dynomite]

I hope people are getting their stuff by now.

Very nice stuff I received today....thanks :thumbsup:
Everything is in mint condition :handshak:

[GOLDCYLON]

Received my parts. Everything as advertised. Many thanks :cheers:

[GOLDCYLON]

anything else left Dean, you havent listed ?

[A26B]

Parts received, all good.

[Dean]

I don't have much left now unless I come across more in the garage. Items I still have are:
Updated 4/13/15

(2) new red seat belts
tech award engine model
Legend magazines
Heart of the Beast magazines
(2) Red bumper ZR1 emblems new
Gordon Killebrew hood opening tool
Gordon Killebrew Fault code diagnostic grounding plugs with book and plugs
Gordon Killebrew ZR-1 training book from his ZR1 class
1991 ZR1 sales brochure and envelope
CPT LT5 training manuals (2) and (2) VHS tapes
(2) more extra CPT LT5 training VHS tapes

[GOLDCYLON]

I don't have much left now unless I come across more in the garage. Items I still have are:

Exhaust
secondary throttle solenoid
(2) new red seat belts
91-95 power switch and keys
tech award engine model
Legend magazines
Kind of the Hill magazines
Heart of the Beast magazines


First thanks for the Clean parts you already sent

Are you willing to Part with some of the magizines? I am going to inventory what I have but I may still have a few gaps. If they were black I would have bought those belts as thats a fair price. My thought is on the mags to some how archive em for the Paying registry members. I was going to talk about this project with Cliff and maybe Mark if there was interest. GC

[Dean]

I wasn't sure what to do with the magazines so they are on Ebay if anyone interested.

[Dean]

Look at a few previous posts to see what I have left. :-D