PDA

View Full Version : SYS MESSAGE


Mr Blue
10-27-2014, 12:28 PM
My 1991 # 1408 started flashing SYS in the mileage display as I was driving to work today. I had to put a battery booster on it, as it had been sitting long enough to have low battery. Other that that it started and ran fine, just that annoying message intermittently. I have not seen any threads on this message, and would welcome help on what to look for.

David

We Gone
10-27-2014, 01:14 PM
You can find out what it is with a scanner, or Gordon Kellebrew sells a set of grounding plugs that allow you to read them using the dash. I'm sure someone else may have a link to what ALDL points to jump to do this and use the dash to diagnose. It may even be in the FSM never looked for it as I have the plugs and a scanner..

http://www.gordonkillebrew.net/Products

batchman
10-27-2014, 05:25 PM
I often get the SYS message when my lightweight battery is in a marginal state of charge. Let your battery come back to life and it should go away - only real impact is it won't allow secondaries.

My answer was to keep it on a tender.

Cheers,
- Jeff

ghlkal
10-27-2014, 07:48 PM
Here's how to check what the SYS code is ...
http://www.zr1.net/forum/showthread.php?t=17846


I often get the SYS message when my lightweight battery is in a marginal state of charge. Let your battery come back to life and it should go away - only real impact is it won't allow secondaries.


I've also experienced a SYS if the battery is low ...

Mr Blue
10-30-2014, 07:25 PM
Thanks everyone

It appears that this was a battery charge issue. After I drove the car and the battery charge was up, no more message. I learned a few useful things anyways. I'll keep the car on a float charger from now on.

David