Bose Radio Cable

[tf95ZR1]

Anybody have one or two of these 3 wire, electrical connector cables?
(Minus the black electrical tape!)
They are from inside the Bose radio casing,
about 5 1/4 inches long with female plugs at each end. Thanks!

http://i529.photobucket.com/albums/dd335/tf95ZR-1/RadioConnZ814_zps3802aa96.jpg

http://i529.photobucket.com/albums/dd335/tf95ZR-1/RadioConnA814_zps8f143dea.jpg

[PhillipsLT5]

Dr Don or junkyard?

[tf95ZR1]

Dr Don or junkyard?

Good Idea, Phillip!
Just left an email for Dr. Don's.
Maybe I'll try Marc Haibeck

[Schrade]

Is that the Cassette logic board - to - Mainboard cable?

If it is there Ted, see if it's the same length as the CD logic board - to - Mainboard cable.

And if so, check to see that the same sockets are populated, as the other cable. THEN, is the [IN-]correct cut in correct position - 1 1/2" - 2" from the header?

[tf95ZR1]

Is that the Cassette logic board - to - Mainboard cable?

If it is there Ted, see if it's the same length as the CD logic board - to - Mainboard cable.

And if so, check to see that the same sockets are populated, as the other cable. THEN, is the [IN-]correct cut in correct position - 1 1/2" - 2" from the header?

Yes to all your questions (I think). That's why I didn't focus....

[phrogs]

If it's from inside the radio I'm sure I have one.

[Schrade]

Yes to all your questions (I think). That's why I didn't focus....

Cool!

Are we there yet? How's it sound?

(putting the splice into the Cassette logic board - to - Mainboard didn't work for one of the guys who tried it, and posted in the LS1 boards thread. Someone else explained why, but it was above me (like most stuff http://www.zr1.net/forum/images/icons/icon10.gif ) (had to do with signal strength) ).

Test first with nothing plugged into the input port, to test integrity of the default circuit.

[tf95ZR1]

If it's from inside the radio I'm sure I have one.

PM sent

[tf95ZR1]

Are we there yet? How's it sound?


I'm going to wait and replace this cable first.
Then I'll proceed.