Need help. Hard top foam padding.

[nelson007]

Can someone advise me where to,purchase the foam headliner. After removing the one in my car it looks pretty bad.
Thanks,
Nelson007

[Z06scentair]

Corvette America sells an entire new liner for $149. Mine looked bad when I pulled it out.

Would have never had a sound sleep if I had put new fabric over that broken up board.

My problem is I ordered as always from Corvette Central only to find out Corvette America is the manufacture. The headliner arrived damaged bent in half in a Corvette America box.

Called and asked for replacement from Corvette Central, let the run around begin!

Never ever ever never ever will I ever do buisness with Corvette Central ever again! Did I say Never? Hell yeah!

Ordered another from Corvette America today. Did a chargeback on Corvette Central Today.

Brad

[KILLSHOTS]

The Registry store has some nice embroidered suede headliners for less than the fabric ones at the Corvette stores. Less money, plus you're helping the club. ;)

[secondchance]

Nelson,

This is what I used. Comes with sponge backed cloth and a can of spray adhesive. I'll install for you if you want when we have our next WMD maintenance day. I think Ron Kreigh needs the same service also.

[nelson007]

I bought the headliner from the Net Registry store, p that looks great, what i need is the foam padding it is glued-to.
Thanks,
Nelson007

[WVZR-1]

I believe I'd visit a local auto upholstery shop and see the offerings. I believe you're looking for KP sheet that is used in most of the later headliners. They should have different offerings I believe in thickness. Catch them in a proper mood and the install might be a bargain. It certainly doesn't hurt to ask. The finish is sometimes worth the professional install. If you didn't have the headliner already they can usually accommodate you with a very nice headliner from remnants that can't do other projects.

I did mine in '03 but I had a relationship with the trimmer.

[nelson007]

Thanks for the advice, I will try that. I bought the liner from the Registry store and that looks great.
Nelson 007

I believe I'd visit a local auto upholstery shop and see the offerings. I believe you're looking for KP sheet that is used in most of the later headliners. They should have different offerings I believe in thickness. Catch them in a proper mood and the install might be a bargain. It certainly doesn't hurt to ask. The finish is sometimes worth the professional install. If you didn't have the headliner already they can usually accommodate you with a very nice headliner from remnants that can't do other projects.

I did mine in '03 but I had a relationship with the trimmer.

[Schrade]

Mine was borderline when I got it out.

I put a mini-roller to it, with water based Acrylic Latex Black, which checked the dust, and reinforced the pad.