Tony Davila
05-04-2014, 01:35 PM
For those of you who hate having only one 12V outlet on the center dash, I may have a solution. I have installed a 3 port 12V outlet on the front of the passengers seat.
All you need is the following.
1. A desire....
2. 12V multiport outlet
3. a block of wood 7"x1/4"x1"
4. Self tapping screws
5. Some wiring knowledge.
http://i69.photobucket.com/albums/i66/Zrace1/5330jpeg_zps5687b165.jpg
12V multiport outlet of your choice.
http://i69.photobucket.com/albums/i66/Zrace1/4540jpeg_zps1e20f817.jpg
Small piece of wood, paint it black so it is not noticeable.
http://i69.photobucket.com/albums/i66/Zrace1/44300jpeg_zps1bc22590.jpg
Attached outlet to wood then wood to front of seat via self tapping screws. Plenty of juice under seat to tie in for 12V.
http://i69.photobucket.com/albums/i66/Zrace1/4414jpeg_zpsf09f9e3e.jpg
http://i69.photobucket.com/albums/i66/Zrace1/2907jpeg_zps9318ce55.jpg
Mission complete, 12V power source for your additional electrical needs.
All you need is the following.
1. A desire....
2. 12V multiport outlet
3. a block of wood 7"x1/4"x1"
4. Self tapping screws
5. Some wiring knowledge.
http://i69.photobucket.com/albums/i66/Zrace1/5330jpeg_zps5687b165.jpg
12V multiport outlet of your choice.
http://i69.photobucket.com/albums/i66/Zrace1/4540jpeg_zps1e20f817.jpg
Small piece of wood, paint it black so it is not noticeable.
http://i69.photobucket.com/albums/i66/Zrace1/44300jpeg_zps1bc22590.jpg
Attached outlet to wood then wood to front of seat via self tapping screws. Plenty of juice under seat to tie in for 12V.
http://i69.photobucket.com/albums/i66/Zrace1/4414jpeg_zpsf09f9e3e.jpg
http://i69.photobucket.com/albums/i66/Zrace1/2907jpeg_zps9318ce55.jpg
Mission complete, 12V power source for your additional electrical needs.