New Aluminum Flywheels & Ram Clutches

[A26B]

http://jerrysgaskets.com/store2/root/index.php?main_page=index&cPath=10&zenid=84882079143e9f455aee9a2385954ce4

We have finally expanded our listing of Ram Clutches for the ZR-1 and added 2 new aluminum billet flywheels, with some features not offered by any other manufacturers, features that I believe, offer better and more options, relative to a ZR-1 owners preferences and needs.

The new flywheels are custom made exclusively for Jerry's Gaskets, PN's 10202537 & 10202538.

Many different clutch options at prices competitive with Summit & Jegs. We will be adding more, stock replacement pull release style clutches, as well as a hydraulic push-release style, compatible with the dual mass flywheel and our new aluminum flywheels mentioned above.

Your feedback is welcome and appreciated.

[A26B]

If you just need to replace the disc, with the dual mass flywheel & stock pressure plate, you can use either one of these clutch discs.

http://jerrysgaskets.com/store2/root/index.php?main_page=product_info&cPath=10&products_id=874

or

http://jerrysgaskets.com/store2/root/index.php?main_page=product_info&cPath=10&products_id=886

[secondchance]

Fantastic! I know I will be going down this road sooner or later.
Thank you for helping us keep our Zs running.

[batchman]

And thank you for doing a *great* job of laying out the options in a sensible fashion.

I keep wondering though how the pedal effort is with the Ram stuff especially converting push/pull, which new for this year my rules package will allow!

Cheers,
- Jeff

[secondchance]

Scott, one of our WAZOO gang, had Mrac install Ram clutch. I believe some mods were made to Ram kit to work with OEM dual mass flywheel.
His thread indicates Ram set up feels as good, if not better then, OEM.
http://www.zr1.net/forum/showthread.php?t=22736

[-=Jeff=-]

Nice Jerry, glad to see some more options