Clean Out

[anthonyzr1]

I wanted to say Hello the the forum! I didn't see a newbie section so I'll just post here and get down to business. I have come into a bunch of LT5 parts! I don't want to put them on ebay, CL or the like and so I found you guys and I wanted to give you first crack at it. If you want to check my seller status my ebay name is boostbros. I'm cleaning out my Dad's property and came across all these old parts. If you want photos phone number shoot me a pm. I know I'll probably be flagged, because its my first post i understand.

3 stock cranks $400 each shipped
Dunn heads off a low mileage 95. I have to see what they are worth
Plenum and runners. I have to see what they are going for as well
LT5 wires (stamped on the wires) new in box $200 shipped
Pistons rods liners (used out of a 91 with 20k) $300 shipped
New Pistons and Liners I'll have to get the part number off them if there is any interest.

Thanks
Anthony

[Dynomite]

I wanted to say Hello the the forum! I didn't see a newbie section so I'll just post here and get down to business. I have come into a bunch of LT5 parts! I don't want to put them on ebay, CL or the like and so I found you guys and I wanted to give you first crack at it. If you want to check my seller status my ebay name is boostbros. I'm cleaning out my Dad's property and came across all these old parts. If you want photos phone number shoot me a pm. I know I'll probably be flagged, because its my first post i understand.

3 stock cranks $400 each shipped
Dunn heads off a low mileage 95. I have to see what they are worth
Plenum and runners. I have to see what they are going for as well
LT5 wires (stamped on the wires) new in box $200 shipped
Pistons rods liners (used out of a 91 with 20k) $300 shipped
New Pistons and Liners I'll have to get the part number off them if there is any interest.

Thanks
Anthony

I will take the LT5 wires...assuming they are the original New Wires.....I would need a photo.

You are in the right area and no worry about being flagged.......and welcome :handshak:

[GOLDCYLON]

Welcome to the forum

interested in the wires

Please sned pics to goldcylon@cox.net

What year are the Plenum and runners for ? GC

[GOLDCYLON]

Cliff go for it obviously typing at the same time :cheers:

[anthonyzr1]

Ok so I just spoke with Cliff, I'll be updating as parts sell and things are added. Thanks soo much for the warm welcome and helping fund the next project!

[efnfast]

You came to the right place to unload that stuff.

[icarus-54]

2nd on the wires,just in case

[ZZZZZR1]

Sending you a pm

:cheers:

David

[anthonyzr1]

Wires are sold guys!

The rest is still for sale. Pics will be posted shortly and I need the weekend to price what I don't have prices for.

Thanks for looking Pm's replied phones have been made.

[pantera1683]

I'm interested in the cams if the price is right.

[LGAFF]

Are those JEal Billet cams?

[Blue Flame Restorations]

Are those JEal Billet cams?

I thought the same thing. Look awful smooth. Not cast.

[tpepmeie]

put me on the list for the heads. pending prices. :cheers:

[anthonyzr1]

Ok guys I'm back from a bachelor party this weekend. Yes it was a TON of fun no there aren't any picture's to share ;-D

I'd like to address the heads to start those are NOT Dunn heads, I did find some time to research a little over the weekend. I do believe I have a set somewhere tho.

To answer LGAFF yes those are a set of JEal cams.

Everyone interested will have a PM shortly.

Thanks
Anthony

[anthonyzr1]

Ok guys heres the update:

Dave is taking the silver plenum, IH, set of stock cams and a crank.
Phil is taking the black plenum, Ih, air horns

Can't wait to meet you gentlemen!

[cvette98pacecar]

Ok guys heres the update:

Dave is taking the silver plenum, IH, set of stock cams and a crank.
Phil is taking the black plenum, Ih, air horns

Can't wait to meet you gentlemen!

It is Robert Not Phil. Dont be selling my parts. Unless Phil made a deal with you last night before I called.

[anthonyzr1]

It is Robert Not Phil. Dont be selling my parts. Unless Phil made a deal with you last night before I called.

Nope he didn't sorry. I've been swamped (I was the middle of selling a Mini S when we spoke lastnight) I will message cliff and revise the listing since he's been so much help thus far. I didn't want to post numbers associated with the deals but if the guys purchasing don't mind then its fine by me. My other thing was I did speak with Jerry at jerrysgaskets.com about purchasing the parts in bulk but when I checked my pm's I wanted to give the guys that got to me first crack they all made "good" offers so I went with it since it ate up most of the parts minus 2 cranks, 1 set of factory cams and the jeal's. So I'm going to go thur the rest of the stuff and get some new photos and pricing posted since I have a good feel for where things should be priced to move at this point.

:cheers:

[anthonyzr1]

Yeah I don't and wasn't trying to run an auction, the first guys that pm'ed and called all worked out.

[Dynomite]

Yeah I don't and wasn't trying to run an auction, the first guys that pm'ed and called all worked out.

Received the Plug Wires today....thanks....nice :thumbsup:

[phrogs]

I can't give away used pistons.