93-95 Cams; Anyone got a measurement??

[LGAFF]

Anyone got a set of 93-95 cams lying around? Wondering if you can measure the base circle; which should be 1.29-1.3; then measure the overall height. Found something funky on the ones I have

[A26B]

Lee,
Some measurements from some data samples I have made.

New 93~95 Cams, B/C: 1.299~1.304, O/A: 1.688~1.692

These dimensions are the same as 90~92 cams

[LGAFF]

hmmmm, mine are not....showing same base circle but more lift

[LGAFF]

90-92 spare I have: I get .390
http://i134.photobucket.com/albums/q115/lgaff/DSCN5550.jpg (http://s134.photobucket.com/user/lgaff/media/DSCN5550.jpg.html)

93-95

Primary Intake:
http://i134.photobucket.com/albums/q115/lgaff/DSCN5547.jpg (http://s134.photobucket.com/user/lgaff/media/DSCN5547.jpg.html)

Secondary Intake:
http://i134.photobucket.com/albums/q115/lgaff/DSCN5548.jpg (http://s134.photobucket.com/user/lgaff/media/DSCN5548.jpg.html)

Base circle: 93-95 ...same as 90-92
http://i134.photobucket.com/albums/q115/lgaff/DSCN5546.jpg (http://s134.photobucket.com/user/lgaff/media/DSCN5546.jpg.html)

[LGAFF]

Now these are the specs of a regrind...but regrinds have a base circle of 1.24-1.25

[LGAFF]

and of course I have 2 right exhaust and 2 right intakes of these....

[A26B]

hmmmm, mine are not....showing same base circle but more lift

Well, maybe they never were ground to stock lift. Entirely possible they were machined & ground from forged blanks with the stock B/C with higher lift.

There are quite a few of those around. I have 4 of them in my Zee.

SGC Stage I cams have 0.415" lift, close to what you are describing.