Looking for single throttle cable clips

[GOLDCYLON]

Need a pair of the single cable clips for the later model LT5 motor throttle clips that secure the throttle cable to the top of the plenum. This is for Bill Lear's 63 Split Window LT5. Phil and I am helping him chase a few parts. I traded him a throttle shield yesterday. If you have some you can spare PLMK. Thanks Daryll

[XfireZ51]

Need a pair of the single cable clips for the later model LT5 motor throttle clips that secure the throttle cable to the top of the plenum. This is for Bill Lear's 63 Split Window LT5. Phil and I am helping him chase a few parts. I traded him a throttle shield yesterday. If you have some you can spare PLMK. Thanks Daryll

Dar,

Think I have 2 spares.

[GOLDCYLON]

Awesome Dom lmk how much you want. Daryll

[phrogs]

I have doubles not singles.
Did he retain the asr? I also have some double throttle cables for our earlier set ups to incorporate the cruise control.

Later
Jp

[GOLDCYLON]

I have doubles not singles.
Did he retain the asr? I also have some double throttle cables for our earlier set ups to incorporate the cruise control.

Later
Jp


No the ASR was not retained. Ok no sweat Dom is looking for a pair of singles for me at the moment. Thanks for the help

[GOLDCYLON]

While Dom still continues to look if anybody else has a single or a pair PLMK. GC

[carter200]

GC,
I'll be machining these in billet in the near future. Been in the works but the holidays slowed me down a bit. :dancing

[efnfast]

GC,
I'll be machining these in billet in the near future. Been in the works but the holidays slowed me down a bit. :dancing

Excellent, I've been wondering what to do with mine since I powder coated my plenum. I'll replace 'em.

[Dynomite]

GC,
I'll be machining these in billet in the near future. Been in the works but the holidays slowed me down a bit. :dancing

Two sets for me......engraved in red letters of course :handshak:
When you get ready and when we see the top surface area.....I will think on what to engrave :cheers:
May need longer SS allen head screws if you make these in billet aluminum.

[efnfast]

D, I thought they only made these for the two cables. Even when there was only one cable, i thought.....

[XfireZ51]

D, I thought they only made these for the two cables. Even when there was only one cable, i thought.....

Mine is a 92 and the clips are for one throttle cable.

[efnfast]

I stand corrected.
I thought I was wrong once before, but I was mistaken.

[GOLDCYLON]

Dom is right the later motors only used a single cable. We need a pair of singles. Carter will let Bill know you could make a pair in billet as well. GC

[carter200]

Dom is right the later motors only used a single cable. We need a pair of singles. Carter will let Bill know you could make a pair in billet as well. GC

Thanks GC. I'll post up when I have an example of both a single and double.

[GOLDCYLON]

still looking :handshak:

[carter200]

still looking :handshak:

GC,
I'm currently machining items for customers but soon as there is a lull I'll be making the billet clips. Hang in there.....;)

[GOLDCYLON]

I will ask Bill if he wants to go billet Carter. Thanks GC

[PhillipsLT5]

I know this will GREAT and better than the plastic Home Depot clip Bill has now on his Split Window that proably does not work

[Dynomite]

I will ask Bill if he wants to go billet Carter. Thanks GCWhat!!!!!! You think there will be doubt ;)

I am thinking what I will have Carter etch in red letters on the double Throttle Cable Billet :dancing

LT5 is obvious so got to be more creative than that.....:D

I have Amsoil 10W-40 on Carter Oil Filter Billet Cover and 91 (for 91 Octane) on Carter Fuel Line Billet.....so maybe -2s (No Secondaries) on the double Throttle Cable Billet .......but there are two Billet Clips so maybe "No" on first and "Seconds" on second :sign10:

The Etching makes each Billet Dual Purpose :cheers:

[LGAFF]

http://www.classictube.com/products

pan down the page, would these stainless clips work????

[Dynomite]

http://www.classictube.com/products

pan down the page, would these stainless clips work????


http://www.classictube.com/images/Doublelineclampweb.jpg

[efnfast]

I'm holden' out for Carter

[carter200]

Thanks all for hanging in and I promise you'll love the billet clips.

PS: Lee you're killing me :censored:

[LGAFF]

sorry only read the first post...

Tell you what here is a free killer idea, how about making some spark plug wire looms that would clean up the engine bay.

[Dynomite]

sorry only read the first post...

Tell you what here is a free killer idea, how about making some spark plug wire looms that would clean up the engine bay.

Billet aluminum. Yes :thumbsup:

[LGAFF]

Also what about the billet PCV retainer we talked about a few years back, I think that would go over well also, PCV sit inside billet sealing with an o-ring or small hose section. Maybe a bolt that runs through the center and holds them together

[LGAFF]

I know, nice drawings:)

http://i134.photobucket.com/albums/q115/lgaff/PCV.png (http://s134.photobucket.com/user/lgaff/media/PCV.png.html)

[LGAFF]

Didn't mean to highjack the thread

[PhillipsLT5]

The single 1 may work but the stock 1 and plenum have a second hole, 1 for screw and I think 1 to stop it from pivoting on screw and turning

[carter200]

sorry only read the first post...

Tell you what here is a free killer idea, how about making some spark plug wire looms that would clean up the engine bay.

Lee,
Hope you know I was just funnin with ya. Hi temp here in my part of sunny Texas was 25 today so I still trying to thaw out. Gonna be 15 tonight and get to a balmy 34 tomorrow, maybe.
Thanks for the other ideas.
PhillipsLT5 is correct and I have a plan to take care of the 2 cable billet clip.
Keep the ideas coming and email or PM me with them so I can keep track of your ideas. :dancing

[Dynomite]

Lee,
Thanks for the other ideas.
PhillipsLT5 is correct and I have a plan to take care of the 2 cable billet clip.
Keep the ideas coming and email or PM me with them so I can keep track of your ideas.

Here ya go ......Etched with AMSOIL 10W-40 in Heavy Red Letters. The size of the letters is shown.

You can see if you take a hammer to the plastic "T" Handle you end up with a nice Flat steel end
with a dimple that you can drill in the middle. I added washers to seal the deal :D

I just know Carter can make Lemonade out of this without the washers and a better transition
from Billet Aluminum "T" Handle to the Dip Stick ;)

Several have Oil Dipstick "T" handles that are broken or cracked which is what I had.....so what the hay.....get the hammer out and see what is inside the "T" Handle :p

I NEED Two.

See Item #3 of LT5 Lubrication Tricks (http://forums.corvetteforum.com/c4-zr-1-discussion/3005470-tech-info-lt5-modifications-rebuild-tricks-500-hp.html#post1580467641)


http://i287.photobucket.com/albums/ll142/dynomite007/Dynomite/c779687c-1d2c-4d7d-9343-e89cf0885f96.jpg
http://i287.photobucket.com/albums/ll142/dynomite007/Dynomite/04e49517-64bb-4341-8ace-9a50f77870cf.jpghttp://i287.photobucket.com/albums/ll142/dynomite007/Dynomite/59bd3c1a-0e8a-43c6-9c85-f0ffe6c3afc6.jpg

[carter200]

[QUOTE=Dynomite;194154]Here ya go ......Etched with AMSOIL 10W-40 in Heavy Red Letters. The size of the letters is shown.

You can see if you take a hammer to the plastic "T" Handle you end up with a nice Flat steel end
with a dimple that you can drill in the middle. I added washers to seal the deal :D

I just know Carter can make Lemonade out of this without the washers and a better transition
from Billet Aluminum "T" Handle to the Dip Stick ;)

Still awaiting the donor dipstick from GC per our last talk about this.......

[WVZR-1]

Need a pair of the single cable clips for the later model LT5 motor throttle clips that secure the throttle cable to the top of the plenum. This is for Bill Lear's 63 Split Window LT5. Phil and I am helping him chase a few parts. I traded him a throttle shield yesterday. If you have some you can spare PLMK. Thanks Daryll

I believe these will do and seem to have the "locating tab" appropriately placed as well:

http://www.classicindustries.com/1955/tri-five/parts/tf600111.html

You can enlarge the image from the link so rather than posting just an image I did the link. I needed some heater cable for a friend and stumbled across these.

[GOLDCYLON]

[QUOTE=Dynomite;194154]Here ya go ......Etched with AMSOIL 10W-40 in Heavy Red Letters. The size of the letters is shown.

You can see if you take a hammer to the plastic "T" Handle you end up with a nice Flat steel end
with a dimple that you can drill in the middle. I added washers to seal the deal :D

I just know Carter can make Lemonade out of this without the washers and a better transition
from Billet Aluminum "T" Handle to the Dip Stick ;)

Still awaiting the donor dipstick from GC per our last talk about this.......

I have not forgot just have not found it at the moment. I put it somewhere so safe that even I cant remember where that is. :cheers:

[carter200]

You guys asked for it and I have come thru on the Billet single throttle cable clip that replaces the nasty factory clip. I will be designing and machining the double throttle cable clip tomorrow.

3282

3283

3284

$40, shipping is included, for the pair whether you choose the single or the double billet throttle cable clip.

Thanks for your support and more is on the way from CT Machining...:dancing

[carter200]

Here is the Billet double throttle cable clip:

3285

$40, shipping is included, for the pair whether you choose the single or the double billet throttle cable clip.

Thanks for your support and more is on the way from CT Machining...:dancing

[efnfast]

Nice, cash is on the way Carter. -Steve

[carter200]

Nice, cash is on the way Carter. -Steve

Received your payment. Also have received payment from Dynomite, Crabs, Roy Barnes and HAWAIIZR-1.

Thanks guys for the support. I plan on mailing out next Friday. Contact me if you need them sooner........:cheers:

[HAWAIIZR-1]

Carter,
Settling in back in Hawaii; will send payment soon for 90MY double. Mahalo brah! Craig :handshak:

[carter200]

Carter,
Settling in back in Hawaii; will send payment soon for 90MY double. Mahalo brah! Craig :handshak:

Payment received and thanks;

PS: Welcome back and get well :dancing

[efnfast]

Nice!