Fikse Offsets.

[cvette98pacecar]

To all Registry Members we now have a discount on FIKSE wheels. I would like to get them in the store for members to buy but have no clue what offsets are needed. If you have FIKSE wheels please add the sizes and offsets so we can the wheels to the store.

Thank you in advance.

[Daniel_Mc]

Man this is a good thing Robert!! Thanks for doing this :thumbsup:

One thing you may want to verify along with the offsets is what brake set up people are running. Some of the aftermarket rotor hats have a built in spacer and this will throw the wheel offset off from a "stock" car.

-Daniel

[cvette98pacecar]

Man this is a good thing Robert!! Thanks for doing this :thumbsup:

One thing you may want to verify along with the offsets is what brake set up people are running. Some of the aftermarket rotor hats have a built in spacer and this will throw the wheel offset off from a "stock" car.

-Daniel

ty.

In addition how about some photos. That way the member could get an Idea of how the wheel will look on his Z.

[Dynomite]

One thing you may want to verify along with the offsets is what brake set up people are running. Some of the aftermarket rotor hats have a built in spacer and this will throw the wheel offset off from a "stock" car.

-Daniel

Exactly :thumbsup:

ZR-1 (90' and 91') Wilwood Rotors and C4 to C5-Z06 Conversion (http://forums.corvetteforum.com/c4-zr-1-discussion/3005470-tech-info-lt5-modifications-rebuild-tricks-500-hp-3.html#post1581564033)

[Z51JEFF]

Ohhhhhhhhhhhhhhhhhhhh how I wish you had that discount for HREs.:censored:Getting ready to get off my a$$ and buy some new shoes for Rosie.