Parting out two yes two ZR-1

[Y-me]

What do ya'll need/want? have a 90 and a 92. Will be parting out the engines down to the rotating assemble, block/crank/pistons.

My shop is located at 4331 Veronica S, shoemaker blvd Ft myers fl. Stop on by say hi.

[mike100]

I'm still trying to collect an ignition module for my 91.

[Y-me]

I'm still trying to collect an ignition module for my 91.

I want gold for that. 700.00 New one's are double and they are basically unavailable.

[Pete]

Give me prices on a pair of heads L/R w/some details i.e. miles,year.
1 set of Cams
1 Left Ex.Cam

Pete

[carter200]

How much for all 4 coolant pipes if they are in great shape?

[Blue Flame Restorations]

Hey Dan. Please don't forget what we discussed last week.

[XfireZ51]

What are interior/exteriors?

[Y-me]

How much for all 4 coolant pipes if they are in great shape?

I'll let you know when I get them off, what constitutes "great shape" on a 21 year old car?

[Y-me]

What are interior/exteriors?

Both cars are white with red interior, The 90 has a decent interior, the other is hit or miss.

[vilant]

What would you want for the '90; 2-front shock actuators(if they work), shifter knob, and original air filter cover?

[icarus-54]

90 back-up light switch?Does either one have a Hurst shifter?

[carter200]

I'll let you know when I get them off, what constitutes "great shape" on a 21 year old car?


NO gouges nor cracks and the lands where the bolts seat are not cracked nor crushed in........put yourself in my place and would you buy them. That is an indicator of great shape.

Pics would be a nice touch, too.

[GOLDCYLON]

This is a small.... Looking for white clip that attaches to passenger rear of fuel rail. Been looking for a long while. GC :cheers:



http://i13.photobucket.com/albums/a292/bdw18_123/91ZR-1LT5Pside.jpg

[Y-me]

This is a small.... Looking for white clip that attaches to passenger rear of fuel rail. Been looking for a long while. GC :cheers:



http://i13.photobucket.com/albums/a292/bdw18_123/91ZR-1LT5Pside.jpg

Neither of mine has that line.

[Kevin]

ecm if it hasn't been called for yet?

[carter200]

NO gouges nor cracks and the lands where the bolts seat are not cracked nor crushed in........put yourself in my place and would you buy them. That is an indicator of great shape.

Pics would be a nice touch, too.

Well..........any news on these? :confused:

[Y-me]

Well..........any news on these? :confused:

Currently pulling them out will send pics.

[yzpilot]

In dyer need of a ECM! DOn't need the chip, just the computer. Are they available?

[mike100]

^^^^^ car down! ^^^^^ (verified bad ecm with my spare)

[yzpilot]

Thanks for the back up Mike!!:-D

[GOLDCYLON]

Y-me hook these brothers up with an ECM

[Y-me]

Y-me hook these brothers up with an ECM

I PM'd him about it.

[GOLDCYLON]

I PM'd him about it.

Awesome GLWTS of all your pieces... GC

[Kevin]

got your PM also, I need an ecm, but not sure the piggybank has that much to give right now

[Y-me]

got your PM also, I need an ecm, but not sure the piggybank has that much to give right now

Can't hate on that.

[A26B]

I'm interested in the following from both cars

Top alternator brackets (alum fork)
Serpentine belt tensioners
Power Steering pump & pulley (pulleys must be straight & no damage)
Thermostat housings
Throttle body(s)
Throttle body cable covers @ t/body
Cam position sensors
92 Oil pan assy
Clutch forks (no cracks or bent)
AC Comp(s) w/clutch (Clutch assy w/accessories is all I really want)
Coolant crossover pipes
Oil Pumps (for core use)
Coil Pak base & aluminum bracket

May be also be interested in short or long blocks if package deal is right

Shoot me an email or PM.

[Y-me]

I'm interested in the following from both cars

Top alternator brackets (alum fork)
Serpentine belt tensioners
Power Steering pump & pulley (pulleys must be straight & no damage)
Thermostat housings
Throttle body(s)
Throttle body cable covers @ t/body
Cam position sensors
91 Oil pan assy
Clutch forks (no cracks or bent)
AC Comp(s) w/clutch (Clutch assy w/accessories is all I really want)
Coolant crossover pipes
Oil Pumps (for core use)
Coil Pak base & aluminum bracket

May be also be interested in short or long blocks if package deal is right

Shoot me an email or PM.

Yikes.

[maroon88iroc]

I need a ZR1 power key switch and radio from the 1990.

I'm easier to get a hold of by txt @ 478-320-8917

Thanks,
-Gibson

[pantera1683]

I need the wiper spray nozzle that attaches to the driver's side wiper assembly and a power key.

[Y-me]

I need the wiper spray nozzle that attaches to the driver's side wiper assembly and a power key.

nozzles go with the wiper arms. Power key and switch with bezel, 210 shipped. I have a 90 (don't know if 91 works like 90 or 92,
and a 92-93

[maroon88iroc]

Y-me I returned ur PM.. I'll take the power key and switch with bezel and the Bose Radio.

Thanks,
-Gibson

edit: Payments sent!

[pantera1683]

how much for the driver side wiper?

[Y-me]

75 shipped for the pair of wipers, breaking them up make the other one junk.

[pantera1683]

75 shipped for the pair of wipers, breaking them up make the other one junk.

I'll pass, thanks.

[Y-me]

They fly on ebay at that price.

[cvette98pacecar]

I need a both passenger and driver side door lock switches and the interior door lights with covers.

[phrogs]

Tell me about the transmissions Im interested in one. As long as it works but I'd tKe a broken one.

Thanks

[RHanselman]

Would like the fender well bolts, air dam/spoiler bolts and front nose bolts off the 92. Price dependant of course...

[FI250]

Along with the A.I.R. system I could use an original cover for the air intake. Any prices yet??

[lakemeadzmonster]

:blahblah: On the 1990 on I'm looking for the 2 braided steel brake lines that come off of the reservoir and attach to the steel brake lines under drivers side below firewall.

I bought insulated replacements and adapters but have always wanted the factory ones back.

Also would be interested in Bose speakers if they are in working order.

[carter200]

Currently pulling them out will send pics. You still yanking on these or what? ;) Still awaiting pics and price....

[Y-me]

You still yanking on these or what? ;) Still awaiting pics and price....

You passed on the coolant crossover pipe, and the coolant tubes are stuck at this point.

[Y-me]

Ok those of you who ordered smaller stuff that should have been gone already. The Fed Ex guy keeps racing past my office at 100 mph, never picks stuff up. Well I scheduled a pick up, so hopefully the Fed Ex gods will smite him if he passes again forcing me to drive the 8 miles to a fed ex office center.

[NVMYRC51]

Heads off the 90?

[Vetman]

Do u have a solid top?

[Y-me]

Do u have a solid top?

Yes but I'm not shipping it, most of the time they show up broken.

[GOLDCYLON]

Yes but I'm not shipping it, most of the time they show up broken.

Have the UPS store pack it and insure it if it breaks its on them. That cost is past onto your buyer. Just an idea. GC

[vilant]

Have the UPS store pack it and insure it if it breaks its on them. That cost is past onto your buyer. Just an idea. GC

I tried that already at one of their stores. They won't do it because the top doesn't fit in any of their "standard" boxes (the largest one they have is a bicycle box), which means they can't pack it and won't insure it. You can pack it yourself but they won't insure it. I remember someone said he built a custom wood crate to ship tops or windshields? Not sure who he used to deliver.

[Blownrunner]

You need to answer your phone, I live a few hours away, would like to set up a time when I could stop by.

Call me 813-689-5792

[Y-me]

You need to answer your phone, I live a few hours away, would like to set up a time when I could stop by.

Call me 813-689-5792

Didn't realize I had a call until too late last night, will call soon.

[Y-me]

Have the UPS store pack it and insure it if it breaks its on them. That cost is past onto your buyer. Just an idea. GC

Did that once. It showed up broken, the buyer called the ups store and the A-hole that packed it/owned the place told the customer I packed it.

[WVZR-1]

I had a Melrose box that I used I think 4 times to ship a top and part of the sale was that the top be returned. The fifth sale was going to the left coast and the return of the empty box was a little more than I had anticipated and I just let it go with the sale. I had "no issues" with any top I shipped. I've sent one other top and it "arrived alive" also. The Melrose packaging isn't hard to duplicate.

I've always used FEDEX and only once I had to open a box for their inspection before they would apply the amount of insurance that I requested. I don't use UPS for anything of value. Yes there's problems with all of them and this isn't the time of year to be considering the ship of valuables or anything of value.

[GOLDCYLON]

I tried that already at one of their stores. They won't do it because the top doesn't fit in any of their "standard" boxes (the largest one they have is a bicycle box), which means they can't pack it and won't insure it. You can pack it yourself but they won't insure it. I remember someone said he built a custom wood crate to ship tops or windshields? Not sure who he used to deliver.


Hmm they have wised up I guess. How in the hell does Melrose do it ?

[GOLDCYLON]

Did that once. It showed up broken, the buyer called the ups store and the A-hole that packed it/owned the place told the customer I packed it.

That would be an easy battle to win. however your right he is an A-hole

[WVZR-1]

That would be an easy battle to win. however your right he is an A-hole

There's no easy "battle" to win when UPS is involved. There's a post on the CF that involved a top and the shipper was several months getting a resolution. I believe they actually trashed his broken top. It was a pack and ship also. I had a differential claim with UPS and was best I recall better than 6 months getting resolved and paid. That was my last UPS "ship" of valuables.

I've had two issues with deliveries of UPS packages - one I found in the middle of the yard. Several months later another and the shipper replaced the order no questions asked. 90 days or so later UPS wanted to investigate and after a conversation they said they could check the package by GPS and it was delivered and they pinpointed the drop spot. It was a very light piece of software, less than I'm sure 6 - 8 ounces and I'm sure it blew away. It was well beyond "breezy". I had checked the yard and a couple adjacent properties before calling the vendor. I asked the gal "you can confirm the drop" -she said "yes"! I had the original box from the "middle of the yard incident" and gave her the package tracking. The scan was done nowhere near my house. She didn't say how many feet but it wasn't at my door-step. Theirs and I'm sure others are very sophisticated tracking.

The package was about this time of year and I arrived home from work way past darkness every weekday from my work. I looked out the window on a Saturday morning and spotted the box while talking on the phone. Tracking said it had been there a couple of days. It was a CF buy and I had no idea of when to expect it.

[mike100]

Melrose has a special heavy duty box with a sort of framework cardboard skeleton top holder which adds both strength and provides a gap to allow the corners and ends of the outer box to crush and never touch the top. I have considered buying just the box from that guy as i had an $800 misadventure with a C6 top that got hammered when it knife-edged right through the end of a box that the seller thought was going to work out.

The seller was a lawyer in Texas and convinced FedEx to pay the insurance.

[GOLDCYLON]

There's no easy "battle" to win when UPS is involved. There's a post on the CF that involved a top and the shipper was several months getting a resolution. I believe they actually trashed his broken top. It was a pack and ship also. I had a differential claim with UPS and was best I recall better than 6 months getting resolved and paid. That was my last UPS "ship" of valuables.

I've had two issues with deliveries of UPS packages - one I found in the middle of the yard. Several months later another and the shipper replaced the order no questions asked. 90 days or so later UPS wanted to investigate and after a conversation they said they could check the package by GPS and it was delivered and they pinpointed the drop spot. It was a very light piece of software, less than I'm sure 6 - 8 ounces and I'm sure it blew away. It was well beyond "breezy". I had checked the yard and a couple adjacent properties before calling the vendor. I asked the gal "you can confirm the drop" -she said "yes"! I had the original box from the "middle of the yard incident" and gave her the package tracking. The scan was done nowhere near my house. She didn't say how many feet but it wasn't at my door-step. Theirs and I'm sure others are very sophisticated tracking.

The package was about this time of year and I arrived home from work way past darkness every weekday from my work. I looked out the window on a Saturday morning and spotted the box while talking on the phone. Tracking said it had been there a couple of days. It was a CF buy and I had no idea of when to expect it.


I was refering to the "LIE" aspect by the UPS Pack and ship story. Dont get me wrong I dont trust either UPS or FEDEX however, they are your only option sometimes or large heavy items like tires. I have great success with the USPS.

[GOLDCYLON]

Melrose has a special heavy duty box with a sort of framework cardboard skeleton top holder which adds both strength and provides a gap to allow the corners and ends of the outer box to crush and never touch the top. I have considered buying just the box from that guy as i had an $800 misadventure with a C6 top that got hammered when it knife-edged right through the end of a box that the seller thought was going to work out.

The seller was a lawyer in Texas and convinced FedEx to pay the insurance.


Yikes

[Y-me]

That would be an easy battle to win. however your right he is an A-hole

Oh no I definitely got that straightened, the fact that he tried just put a bad taste in my mouth.

[GOLDCYLON]

Oh no I definitely got that straightened, the fact that he tried just put a bad taste in my mouth.


I agree and I would vote with my feet as well. Again a total ahole

[Y-me]

Ok here is what I've learned about parting out two of these at the same time or anymore period.

I am 99.9% sure I ain't doin' this again.

All ZR1 owners owe me 10 bucks for making their cars more rare and valuable.

I am not removing heads again, if someone wants the heads they can do the work, removing the timing set up and packaging of the remaining block, AFTER paying me. So 4k for Block heads and timing gear.

1,900 for a block with crank, and pistons/rods. Hehe I said 'Rods'.

Everyone wants something relatively cheap that requires 10 hours of work, and incapacitates the car.

I am Jerry's B*%ch.

There is no Santa Claus

The Fed ex guy thinks it's hilarious as he blows by me trying to flag him down, He waves back while laughing and trying to break his time record through the parking lot.

This was too hard to take on in a new unknown area (there is like no newspaper for packing here) with no large vehicle to get/drop off stuff. A bicycle, Harley and Lowly LT1 Vette are just not sufficient.

I am too far now From Brett to come visit and give me money.

Gold Cylon would probably be cool to have a beer with.

Wile E. Cyote just ain't the Super Genius he claims to be.

[Y-me]

This thing has a Fideza aluminum flywheel 300 shipped, could not have been on long, includes pressure plate and clutch plate

[Blue Flame Restorations]

I'l be in Kissimmee in January for a beer. Got the DIS today. Can never have enough backups (3)!

[phrogs]

Come on how many of these have you parted out? I have killed 4 ZR-1s so you all owe me $40 bucks each for making your car more rare.

Parting them out is fun!

[efnfast]

This thing has a Fideza aluminum flywheel 300 shipped, could not have been on long, includes pressure plate and clutch plate
Any idea how many miles are on this?

[XfireZ51]

I parted one out and it was painful to watch especially since I really liked the car.
My garage looked like a huge Thanksgiving Day table after everyone had finished
eating.

[Y-me]

Come on how many of these have you parted out? I have killed 4 ZR-1s so you all owe me $40 bucks each for making your car more rare.

Parting them out is fun!

Got me beat.

[Y-me]

Any idea how many miles are on this?

No clue but still shiny

[GOLDCYLON]

Ok here is what I've learned about parting out two of these at the same time or anymore period.I am 99.9% sure I ain't doin' this again.

What...... with all that practice?

All ZR1 owners owe me 10 bucks for making their cars more rare and valuable. Or at least a beer


I am not removing heads again, if someone wants the heads they can do the work, removing the timing set up and packaging of the remaining block, AFTER paying me. So 4k for Block heads and timing gear.1,900 for a block with crank, and pistons/rods. Hehe I said 'Rods'.

Thats why those bolts can be used over and over again


Everyone wants something relatively cheap that requires 10 hours of work, and incapacitates the car.

Its a small community and just hard working honest folks own these car now. The big money owners are long gone and moved on to newer cars.

I am Jerry's B*%ch

We all are ;) and thanks to Jerry for supporting us in this hobby :handshak:

There is no Santa Claus Poor Virginia :(

The Fed ex guy thinks it's hilarious as he blows by me trying to flag him down, He waves back while laughing and trying to break his time record through the parking lot.

:censored: I really hate FEDEX and UPS and this is the worst time of year to ship with them.

This was too hard to take on in a new unknown area (there is like no newspaper for packing here) with no large vehicle to get/drop off stuff. A bicycle, Harley and Lowly LT1 Vette are just not sufficient.I am too far now From Brett to come visit and give me money.

Why do I hear Banjos ?

Gold Cylon would probably be cool to have a beer with.

Corona please :)

Wilye E. Coyote just ain't the Super Genius he claims to be.

Yes he is :-D ACME said so

[Schrade]

Secondary Vacuum Pump?

Excision shouldn't take 10 hours; 9 tops http://www.zr1.net/forum/images/icons/icon10.gif


also looking for SP loom brackets, that go here:
https://lh3.googleusercontent.com/-v_Qw896nrMk/UoFJenZvB_I/AAAAAAAACtI/9DcYilcpdUQ/s1280/HPIM7492.JPG

[Karl]

What condition are the ZF-6 Speed transmissions?

[Y-me]

What condition are the ZF-6 Speed transmissions?

One works great, blue tag 1900.00 the other pops out of reverse, still in car presumably a black tag 1, 000. Plus shipage.

[icarus-54]

Any word on a back-up light switch?

[Z06scentair]

Dis module?

[maroon88iroc]

Have you got the small stuff shipped out yet?

I am still waiting on the radio and power switch key with bezel I paid for last monday. It sucks driving the car with no radio..

[phrogs]

One works great, blue tag 1900.00 the other pops out of reverse, still in car presumably a black tag 1, 000. Plus shipage.

Wait 1000 for the black tag? That's different than when I asked If it's a black tag Let me know for sure please.

[Mr Blue]

In regards to shipping the top, TCurtner shipped one to me in March. He wrapped it in bubble wrap, supported it with closed cell foam, and used two overlapping guitar boxes. The top was perfect on arrival. :) Hard to say it was overkill, maybe just enough. I also arranged to pick it up at the UPS store close to home because I didn't want it delivered when no one was home. Can't be too careful.

David

[XfireZ51]

Y-me,

Would like roll cage molding or halo for both sides. Also, do you have the rubber gasket for the door strikers? These can be found at the upper door on the C pillar. I can provide pics if needed.

[Y-me]

Wait 1000 for the black tag? That's different than when I asked If it's a black tag Let me know for sure please.

Thats cuz both cars should have been black tags, and turns out the 92 had a blue, so I have not been under the 90 yet.

[Y-me]

Y-me,

Would like roll cage molding or halo for both sides. Also, do you have the rubber gasket for the door strikers? These can be found at the upper door on the C pillar. I can provide pics if needed.

Yes I would need pics as Corvettes don't have c-pillars.

[XfireZ51]

I'm looking for the gasket that surrounds this

http://i187.photobucket.com/albums/x198/Z51Xfire/3aa256d31142e191d0d840f1252c8711_zps4bbabb44.jpg
Both sides


Also the halo moldings

http://i187.photobucket.com/albums/x198/Z51Xfire/9d74d71619a34fb3d8cae6c1b6be866d_zps7d727dfe.jpg

Both sides. Color Black, no cracks.

[Y-me]

I'm looking for the gasket that surrounds this

http://i187.photobucket.com/albums/x198/Z51Xfire/3aa256d31142e191d0d840f1252c8711_zps4bbabb44.jpg
Both sides


Also the halo moldings

http://i187.photobucket.com/albums/x198/Z51Xfire/9d74d71619a34fb3d8cae6c1b6be866d_zps7d727dfe.jpg

Both sides. Color Black, no cracks.

Got red.

[XfireZ51]

Got red.

What about rubber seals I'm looking for?

[phrogs]

Thats cuz both cars should have been black tags, and turns out the 92 had a blue, so I have not been under the 90 yet.

Yeah I get that, let me know when you find out.

[Z51JEFF]

How much for a set of J55 calipers in great shape?

[Y-me]

How much for a set of J55 calipers in great shape?

Selling them with the suspensions.

[Z51JEFF]

How much for the driver side halo molding on the 92?

[Y-me]

How much for the driver side halo molding on the 92?

It was cracked.

[Y-me]

No more interest? I'm surprised there are not more South Floridians that need stuff. Back in VA the Wazoo would have held a Kegger at my house by now.

[Kevin]

i was under the impression you gave up parting these out

[Y-me]

i was under the impression you gave up parting these out

Either way gotta clear out what I got.

[cvette98pacecar]

Take some photos of what is left. I am sure someone will still buy parts.
Do both cars still have the Dana 44? Shoot me an Email with a price and we might be able to work something out.

[Y-me]

Selling the rear suspensions 1,500 a piece. Most stuff that fit are already in boxes with the 90 still 3/4 complete as I don't want a ton of clutter in there during my inspections, whenever that goes down.

[Blownrunner]

Thats cuz both cars should have been black tags, and turns out the 92 had a blue, so I have not been under the 90 yet.

What is the difference between the trans with black id plate or blue? Thanks.

[Y-me]

What is the difference between the trans with black id plate or blue? Thanks.

A black tag is an earlier 89-93 Unit, It was made in Germany, and has thicker gears so overall stronger, but noisier.

A Blue Tag 94-96 was Built in America and runs quieter.

Either trans will work in any year.

[rikker]

What do ya'll need/want? have a 90 and a 92. Will be parting out the engines down to the rotating assemble, block/crank/pistons.

My shop is located at 4331 Veronica S, shoemaker blvd Ft myers fl. Stop on by say hi.

Any contact number for you on parts?

[Y-me]

Any contact number for you on parts?

Business line (not quite open yet, usually screen calls due to high volume of people trying to sell me stuff.) 239-672-4025

Personal Line 703-434-0671

[alnukem]

Heads received, Thanks, Tim

[Y-me]

Heads received, Thanks, Tim

Just now?

[-=Jeff=-]

back-up/reverse lights ??

[icarus-54]

back-up light switch @trans?

[Y-me]

back-up light switch @trans?

Have not really looked for it. This site has em for 40.00 http://www.ecklerscorvette.com/corvette-back-up-light-switch-for-cars-with-manual-transmission-1989-1996.html

[RICHARD TILL]

Under the console lid there are two indentions, one for an ash tray and the other is a molded rubber insert for a drink can. I need the molded rubber. Have one?

[icarus-54]

Have not really looked for it. This site has em for 40.00 http://www.ecklerscorvette.com/corvette-back-up-light-switch-for-cars-with-manual-transmission-1989-1996.html

The ones they sell are for a regular vette,the one for a zr-1 dosent have the pig tail,the wiring harness plugs directly into the switch.

[WVZR-1]

The ones they sell are for a regular vette,the one for a zr-1 dosent have the pig tail,the wiring harness plugs directly into the switch.

None of the OEM/GM switches had the pig-tail but it works for and is a service part for all. In all likely hood you don't need a switch. Remove yours and clean/soak the detent ball and you should be all set. Now if it's leaking through the switch connector that's a different issue.

Y-me removes the switch he's now created a "leaker" and an "incomplete" ZF. I wouldn't think he's interested in a sale of it.

[icarus-54]

It's been cleaned and soaked the detent ball has been worked and there is no leak,but it still doesnt work.Guess I'll have to use the replacement.

[merkanic]

I killed my transmission @ mojave mile. Do you still have one for sale

[LantanaTX]

Looking for:

left and right cowl screens
the rubber fuel neck thing
drivers side of the console that has carpet attached to it for black interior
review mirror glass has some black spots if you have a good one
passenger side window if perfect condition.
Secondary fan
panel with light and fog light switch in it if nice condition, mine has gray paint rubbed off below fog light switch
Front left and right indicator/fog light lens/assembly, mine has minor cracks and staining
Drivers door pull cup if gray is in good condition, mine us rubbed off

[Y-me]

Looking for:

left and right cowl screens
the rubber fuel neck thing
drivers side of the console that has carpet attached to it for black interior
review mirror glass has some black spots if you have a good one
passenger side window if perfect condition.
Secondary fan
panel with light and fog light switch in it if nice condition, mine has gray paint rubbed off below fog light switch
Front left and right indicator/fog light lens/assembly, mine has minor cracks and staining
Drivers door pull cup if gray is in good condition, mine us rubbed off


Have to look at what I have when I get back, and conditions. front lenses never happen as I sell them with the entire bumper and you have to completely disassemble the assembly to replace them. As for "perfect condition" these cars were parted out for a reason, it's not like I'm parting NCRS candidates

[LantanaTX]

Have to look at what I have when I get back, and conditions. front lenses never happen as I sell them with the entire bumper and you have to completely disassemble the assembly to replace them. As for "perfect condition" these cars were parted out for a reason, it's not like I'm parting NCRS candidates

Understood, but worth a try right? Also while going over the car, I noticed I am missing a piece of trim on the targa top. It is the small piece of trim on the rear passenger side that goes from the corner where the attachment point is to behind the passengers head. Let me know if you can help with this, but I assume this usually gets sold with the top.

[We Gone]

A lot of the small parts are common C4 parts. Hope you find what you need, some time tracking down all the small stuff just takes time.

[Racinfan83]

Lantana you may have tried this already - but look for the stuff you mentioned on Corvette Central, Corvette America, Mid America Motorsports, etc. I have found even some small "hard to find" interior parts at CC.

[LantanaTX]

Lantana you may have tried this already - but look for the stuff you mentioned on Corvette Central, Corvette America, Mid America Motorsports, etc. I have found even some small "hard to find" interior parts at CC.

Thanks, I already have some other parts on their way to me from Corvette America and Corvette Central.

[Y-me]

left and right cowl screens No good
the rubber fuel neck thing 15.00
drivers side of the console that has carpet attached to it for black interior have tan, you can peel your carpet and glue it on 75.00
review mirror glass has some black spots if you have a good one sold my last good one
passenger side window if perfect condition. 125 not perfect
Secondary fan One fan? 50.00
panel with light and fog light switch in it if nice condition, mine has gray paint rubbed off below fog light switch 85.00
Front left and right indicator/fog light lens/assembly, mine has minor cracks and staining
Drivers door pull cup if gray is in good condition, mine us rubbed off

[LantanaTX]

left and right cowl screens No good
the rubber fuel neck thing 15.00
drivers side of the console that has carpet attached to it for black interior have tan, you can peel your carpet and glue it on 75.00
review mirror glass has some black spots if you have a good one sold my last good one
passenger side window if perfect condition. 125 not perfect
Secondary fan One fan? 50.00
panel with light and fog light switch in it if nice condition, mine has gray paint rubbed off below fog light switch 85.00
Front left and right indicator/fog light lens/assembly, mine has minor cracks and staining
Drivers door pull cup if gray is in good condition, mine us rubbed off]

Thank you, I am traveling on business for a couple of days and will try to get a hold of you when I am back in town.