View Full Version : Camtastic Monday
LGAFF
10-29-2013, 07:01 PM
2 SGC Stage II Exhaust...soon to be intake cams
4 Callaway Spec Intake Cams
2 Callaway Spec Exhaust Cams
2 Jeal intake Cams going to Webcams for hardening
13 Misc 90-95 stock cams....
http://i134.photobucket.com/albums/q115/lgaff/Picture4378.jpg (http://s134.photobucket.com/user/lgaff/media/Picture4378.jpg.html)
Paul Workman
10-29-2013, 07:11 PM
So, Lee... Who did you kill to get all that loot?
WHAT A HAUL!!?:dancing
LGAFF
10-29-2013, 07:18 PM
I have some uneven matches....2 left 95 exhaust, 2 right 95 intake, etc....more intake than exhaust
efnfast
10-29-2013, 07:31 PM
Good lord that's a lot of cams.
LGAFF
10-29-2013, 07:34 PM
Some I had before but picked up 10 cams in the last 2 days
BigJohn
10-29-2013, 07:36 PM
2 SGC Stage II Exhaust...soon to be intake cams
4 Callaway Spec Intake Cams
2 Callaway Spec Exhaust Cams
2 Jeal intake Cams going to Webcams for hardening
13 Misc 90-95 stock cams....
http://i134.photobucket.com/albums/q115/lgaff/Picture4378.jpg (http://s134.photobucket.com/user/lgaff/media/Picture4378.jpg.html)
Cool!!!
Are they all new old stock or take offs?
:cheers:
LGAFF
10-29-2013, 07:38 PM
Its a mix....Callaway stuff are fresh regrinds from Dave Generous at Cam Techniques...I now own the masters since Dave has hung it up.
Mystic ZR-1
10-29-2013, 07:42 PM
Cool!!!
Are they all new old stock or take offs?
:cheers:
How many of them 410 valves are "take offs"?
How many cams make them 410 valves go up & down?
:dancing
efnfast
10-29-2013, 07:53 PM
Isn't it really Camtastic Tuesday?
LGAFF
10-29-2013, 07:55 PM
Well got some on monday and today
BigJohn
10-29-2013, 07:56 PM
How many of them 410 valves are "take offs"?
How many cams make them 410 valves go up & down?
:dancing
None are take offs.
All of them go up and down with cams.
Three of the engines are not in vehicles.
Doug how many lugnuts are on an 18 wheeler???
:neutral:
Mystic ZR-1
10-29-2013, 08:53 PM
Depends on whether or not it has knock offs...
tf95ZR1
10-29-2013, 09:25 PM
Cam a lot
Jagdpanzer
10-29-2013, 09:49 PM
I hear a new version of an old Jimmy Buffett song - Cam Monday
http://www.youtube.com/watch?v=e0---Q97pG4
BigJohn
10-30-2013, 01:17 PM
Depends on whether or not it has knock offs...
So you mean, that they are not real Alcoa Wheels!!!
:confused:
Mystic ZR-1
10-30-2013, 02:00 PM
So you mean, that they are not real Alcoa Wheels!!!
:confused:
No. The kind you're supposed to use a lead hammer on.
BigJohn
10-30-2013, 02:49 PM
No. The kind you're supposed to use a lead hammer on.
OK!
Anyway the answer is 100!
:o
PETE, for your regind program, would their be any advantages whatsoever to send you 4 brand new cams for regrinding instead of 4 used cams.
I'm noticing that new cams and used cams go for about the same money approx $250.
Thanks.
LGAFF
11-06-2013, 03:54 PM
Pete is not on this thread, might want to send him a PM.....myopinion there is no dfference. Cams wear slowly and my cam guy told me GM hardening process on cams went very deep...rare if ever to see a failure
tf95ZR1
11-06-2013, 04:22 PM
Nevermind......
LGAFF
11-06-2013, 04:30 PM
I am going to see if I can harden the set I have....another option would be to run a slightly higher idle to ensure more oil pressure
Pete is not on this thread, might want to send him a PM.....myopinion there is no dfference. Cams wear slowly and my cam guy told me GM hardening process on cams went very deep...rare if ever to see a failure
Thanks you Sir. Why do you have so many cams? Are you doing some cam work?
I swear I'm just going to start running my own blanks. But I would have so much lathe time that they would be prohibitively expensive for others to buy.
vBulletin® v3.8.11, Copyright ©2000-2024, vBulletin Solutions Inc.