View Full Version : 1990 Red/Red part out
Polo-1
08-30-2013, 05:41 PM
Looks like I might have a second Red part out coming up.
Anyone want parts again ;)
List at post # 19
http://www.zr1.net/forum/showpost.php?p=182032&postcount=19
tpr60
08-30-2013, 07:03 PM
How is the carpets behind the seats? One seat cushion&back in red? Keep me in mind.
vettn71
08-30-2013, 07:30 PM
What about the windshield and rear bumper?
Jim
Dynomite
08-30-2013, 08:43 PM
Looks like I might have a second Red part out coming up.
Anyone want parts again ;)
Sure ;)
I like parts :D
GOLDCYLON
08-30-2013, 09:57 PM
Pm sent
Polo-1
08-30-2013, 10:30 PM
This car has no body damage ( never wrecked ). Paint, glass, everything works and is clean. Car just turned 60,0xx miles. I think I can part it for more then as is running car.
Just looking for interest for part before it looks like the last 91 Red car.
The Z killer:p
Sometimes the parts are better used to keep the pack going:)
http://i7.photobucket.com/albums/y292/kpie/IMG_1532.jpg (http://s7.photobucket.com/user/kpie/media/IMG_1532.jpg.html)
I'll take the 402.
Oh wait, never mind.
:-)
vilant
08-31-2013, 02:32 PM
PM sent
Polo-1
08-31-2013, 05:31 PM
I'll take the 402.
Oh wait, never mind.
:-)
might need that back....:dancing
Z51JEFF
09-02-2013, 02:24 AM
I need the pass side carpet thats on the side of the trans tunnel.I think this is attached to the entire panel.Will buy whatever just to get this one piece of carpet.Also need the Halo panels if they are in good shape,Thanks.
-=Jeff=-
09-02-2013, 10:19 AM
Didn't the halo panels change in 91? If so these may not work for Z51Jeff
Z51JEFF
09-02-2013, 02:18 PM
Didn't the halo panels change in 91? If so these may not work for Z51Jeff
It was 84-90,91-96.But the car being parted is a 91 and so is mine so no issues.
-=Jeff=-
09-02-2013, 04:56 PM
It was 84-90,91-96.But the car being parted is a 91 and so is mine so no issues.
But the title of this thread is 90 red/red for part out..
Z51JEFF
09-03-2013, 01:25 AM
But the title of this thread is 90 red/red for part out..
I got it mixed up with the other car already parted,Damn wanted those panels.I could still use the carpet.Thanks for the info Jeff.
emmvette
09-03-2013, 09:22 AM
Are the brains any good? I may buy them for spares if the price is right. PM sent.
icarus-54
09-03-2013, 09:55 AM
How about a back up light switch?
Z51JEFF
09-03-2013, 11:55 AM
How much for the ECM?
I am looking for a discontinued GM part number 10052168. It is a small retainer clip (bracket) for the fuel lines on a 1994 ZR-1 Corvette. The part sits just above the blower motor control module just forward of the firewall on the passenger side. It appears to be unique for the ZR-1 model as I have not seen it on the 1994 Corvette with the LT1 engine.
Thanks,
Dale Zimmerman
1994 Black Rose ZR-1
Lincoln, Nebraska
Polo-1
09-03-2013, 05:32 PM
Here is a starter list of part for this 1990 part out. Let me know what you all want. The car is still togather. Will not start till I have a good part of the list filled out.
Parts are all good and working. Will have pictures later as list gets filled.
Front bumper cover - 200
Front bumper support - 100
Front impact bar - 200
Hood - 400
Fender LH - 50
Fender RH - 50
Door LH - 200
Door RH - 200
Rear bumper - 1,000
Mirror LH - 45
Mirror RH - 45
All molding - 500
Rear bumper support - 100
Rear bumper impact - 100
Foglight LH - 75
Foglight RH - 75
Headlight LH - 75
Headlight RH - 75
Hood prop - 25
Front suspension - 400
Engine cradle - 100
Front calipers & brackets - 125
Dana 44 complete - 1,500
Windshield - 750 - Goldcylon
Oil cooler - 80
Oil Cooler lines - 90
Radiator - 25
Thermostat Housing - 500
Gas tank - 50
Fuel Sender - 150
Engine - 5,000 Will come complete all sensors and DIS and coils
Trans & Bell Housing- 1,000
Driveshaft - 75
C-Beam - 75
AC box underhood - 500
AC box dash - 50
Dash pad - 150
Dash skeleton - 50
Seat track LH - 50 -=Jeff=-
Seat Track RH - 50 -=Jeff=-
Seats - 600 -=Jeff=-
Trans tunnel LH - 75
Trans tunnel RH - 75
Door panel LH - 125
Door panel RH - 125
Cluster - 350
CCM & Keys - 250
ECM - 425
SeatBelts - 150 -These are post recall
Headlight switch - 40 -
FX3 & Seat Switch and harness - 150
Targa Top Clear - 350
7Targa Top Painted - 300
Inner Fender F LH - 50
Inner Fender F RH - 50
Inner Fender M LH - 25
Inner Fender M RH - 25
Inner Fender R LH - 50
Inner Fender R RH - 50
Inner Fender Rear LH - 40
Inner Fender Rear RH - 40
Tail Lamps - 50
License plate frame - 125
Reverse lights - 75 =Jeff=
AC Controller - 100
AC programmer - 250
ABS - 250
ABS Sensors Wheel 50ea -
Brake booster - 150
Brake Master - 50
Airbag - 125
Steering Wheel - 100
Column - 125
Airbag Sensors - 150
DERM - 250
FX3 actuator front - 75 ea-Cliff
FX3 actuator rear - 75 ea- Cliff
FX3 Shocks Front - 50 ea
FX3 Shocks Rear - 50 ea
Polo-1
09-03-2013, 05:34 PM
I got it mixed up with the other car already parted,Damn wanted those panels.I could still use the carpet.Thanks for the info Jeff.
I might still have from the 91 part out. I need to look out in the barn. I'll let you know.
Polo-1
09-03-2013, 05:36 PM
Are the brains any good? I may buy them for spares if the price is right. PM sent.
Yes, It's a running driving car. I will not sell a part that bad. Those that know me from the last part out, know my parts are good to go.
Dynomite
09-03-2013, 05:37 PM
I will take actuators front and rear
Z51JEFF
09-03-2013, 06:49 PM
I might still have from the 91 part out. I need to look out in the barn. I'll let you know.
What I really need is the carpet on the pass side of the trans tunnel.From what I understand this is glued to the entire side of the trim that runs from the dash trim next to the console all the way down to the floor.This is in Flame Red 90-92.Thanks.
mike100
09-03-2013, 10:16 PM
If by chance you don't sell the front suspension as a unit, I'm kind of keeping my eye out for a front spring IF the center pads were not cut down to lower the car.
chriskinzel
09-03-2013, 11:20 PM
If the '7Targa Top Painted - 300' is the red fiberglass top I would like it.
Thanks
yzpilot
09-04-2013, 04:53 AM
Definitely interested in the ECM! Have a dead one now, and a really good looking paper weight! Mine is a 91, but from what I understand, it is the same for 90-91. Let me know.
Thanks
ZZZZZR1
09-04-2013, 08:23 AM
Definitely interested in the ECM! Have a dead one now, and a really good looking paper weight! Mine is a 91, but from what I understand, it is the same for 90-91. Let me know.
Thanks
ECM's work on each year 1990 to 1995
:cheers:
David
GOLDCYLON
09-04-2013, 08:39 AM
ECM's work on each year 1990 to 1995
:cheers:
David
With the correct year Prom yes they do
mrmojo1111
09-04-2013, 12:55 PM
Obviously, Chriskinzel has dibs on the targa top, but, if that falls through, I'll take it.
Vetman
09-04-2013, 01:08 PM
I need the solid top if it is available.
Z51JEFF
09-05-2013, 01:07 PM
Has the spark controller been spoken for yet?
chriskinzel
09-05-2013, 03:16 PM
When will these be ready to ship? How can I pay for them?
GOLDCYLON
09-05-2013, 05:16 PM
Has the spark controller been spoken for yet?
According to the list its going with the motor if you mean the DIS? or are you refering the blower motor thingy
Polo-1
09-05-2013, 08:18 PM
Well parts are not flying off the car like the old days. Sure the prices are not at fire sale price. I'm just not sure yet. The car is clean shape I might try to sell as a running car for $17-18 range... I'll keep this going till this weekend. Everyone just post your parts wanted out here to keep some order of who wants what.
Thanks Guys
Kevin
vilant
09-06-2013, 04:23 PM
I'm PM'ed you back at post #8 about the parts I wanted. 2- front shock actuators and air filter cover. I'll take the shifter knob too, if unaccounted for.
Vetman
09-06-2013, 07:58 PM
Is there a solid top? If so, price.
Polo-1
09-06-2013, 09:59 PM
Targa Top Clear - 350
Targa Top Painted - 300
Vetman
09-07-2013, 10:26 PM
I will buy the solid top if it is in decent shape. Please PM me details of condition and cost to ship to Washington at 98908 and payment procedure.
mrmojo1111
09-07-2013, 10:40 PM
:cheers:Did chriskinzle decline the solid top? I believe he had dibs and I had secondzies ; )
mrmojo1111
09-07-2013, 10:41 PM
Although, maybe prohibitive to ship 3/4 of the way across the country!
chriskinzel
09-08-2013, 09:11 PM
I still want the solid top!
Z51JEFF
09-08-2013, 11:49 PM
I need the rear window striker,still looking for NOS but at this point Ill take a nice used piece.
Vetman
09-09-2013, 01:43 PM
Let me know if the deal with Chris doesn't happen.
zr1carguy
09-10-2013, 03:53 PM
Do you have the rear license plate assembly for the 1990 ZR1? Thanks
chriskinzel
09-19-2013, 01:10 PM
What is happening with this? Still parting out? or ??? Just wondering.
Polo-1
09-19-2013, 10:33 PM
It's not off the table, but I'm thinking of trying to polish it up and sell as a running car first.
phrogs
09-20-2013, 09:39 AM
You and me both!
I just missed a deal on Copart for a Flood damaged red 90 ?? I forgot about the auction because I was on vacation..
This car has no body damage ( never wrecked ). Paint, glass, everything works and is clean. Car just turned 60,0xx miles. I think I can part it for more then as is running car.
Just looking for interest for part before it looks like the last 91 Red car.
The Z killer:p
Sometimes the parts are better used to keep the pack going:)
http://i7.photobucket.com/albums/y292/kpie/IMG_1532.jpg (http://s7.photobucket.com/user/kpie/media/IMG_1532.jpg.html)
Dynomite
09-20-2013, 02:51 PM
It's not off the table, but I'm thinking of trying to polish it up and sell as a running car first.
Selling as a runing car without the four FX-3 Shock Actuators?? :sign10:
Just teasing ya :thumbsup:
vBulletin® v3.8.11, Copyright ©2000-2025, vBulletin Solutions Inc.