Front Inner wheel wells

[We Gone]

As most of you read in a previous post I made, while on my way to Marc's I had the good luck of killing a road gator in the process it cracked my left front inner fender well. I have spent the last few days looking for a new one problem is they are all black part # 10255287. Mine are gray? I have found out the 88-90's # 14104001 are all gray. There does not look to be any major changes other than near the radiator and slotted outer mounting holes.
Could I get you 90's and early 91's guys to look and confirm if your front inner wheel wells are gray or black? I just wonder if GM modded the first 100 or so Gray 90's ones to fit the early 91's mine is #118.

If all else fails I will change both to black but would prefer to keep it original.

http://imageshack.us/a/img838/1103/9nxk.jpg

http://imageshack.us/a/img818/4993/l1nl.jpg

[902066]

Looked at my 90 #2066. Left front liner is black. Mounting bolts look to be like yours.

[We Gone]

Thanks, odd I wonder how I got gray on L & R

[Franke]

Looked ay my 90 #1755. They are black also.

[tpr60]

My 90 #903 are black.

[We Gone]

thanks, looks like at this point I may be buying both...just my luck!!!!:-({|=

[WVZR-1]

Thanks, odd I wonder how I got gray on L & R

First thing to check is the casting information on your "old parts"! There will be casting information for sure! Then you shop for a match! The 14104001 can be had - drop me a PM!

[902066]

My eyes aren't the greatest any more, but it looks to me like my black liners have #14104001 on them?

[WVZR-1]

My eyes aren't the greatest any more, but it looks to me like my black liners have #14104001 on them?

I had never seen "gray" but I wouldn't argue it. I'd think some sort of treatment has discolored the original and I would have thought that the fascia change from '90 to '91 would require a different wheelhouse liner anyway. I've never physically tried to fit one to the other so I wouldn't argue that either. My '90 is #673 and they're black and at daylight I might actually check for a casting.

[PhillipsLT5]

http://www.20thstreetauto.com/

[We Gone]

I had never seen "gray" but I wouldn't argue it. I'd think some sort of treatment has discolored the original and I would have thought that the fascia change from '90 to '91 would require a different wheelhouse liner anyway. I've never physically tried to fit one to the other so I wouldn't argue that either. My '90 is #673 and they're black and at daylight I might actually check for a casting.

Thanks for the input. and yes the 90's are different due to the front fascia. I have looked up the part # from GM as listed in on the Parts CD, They are 10275625 & 626, so far I have found a few different #s but GM had a habbit of changing #'s over the years. The R & L on mine are Gray as the pic shows and are gray all the way thru, this is only the front forward liners all the others are black. I have found a set of NOS with the part # I listed waiting on a reply as to the color. If they are black I will just get the set. If it were any of my other C4's I would just leave it as is.
Just finding it odd that mine were not black as others, I may call Gordon Killibrew and ask him about it.

The part # off the left on my 95 & 96 are 10255287

[We Gone]

My eyes aren't the greatest any more, but it looks to me like my black liners have #14104001 on them?

Yes that is a correct part # for 88-90

[WVZR-1]

For your '91 you want parts with this casting information:

Right side: 10146496

Left side: 10146495

Those should likely be found on '91 & '92 cars only and maybe '93. The material may have changed creating a part# difference in maybe '94. There's one other interim part # between what you have and the original numbers I gave you but I believe they're insignificant.

You need to have a couple '91 owners check theirs and confirm what I've just mentioned.

[Cal55]

My 91 #202 are black, I haven't checked the # though. It really isn't very noticeable, you might just want to leave it unless you plan on having the car judged.

[We Gone]

My 91 #202 are black, I haven't checked the # though. It really isn't very noticeable, you might just want to leave it unless you plan on having the car judged.

Thanks I found a set of NOS with the correct part number. I will just change both so they match. I spoke with Gordon and he told me if they made a change in vendors on the line they used all of the old's first so finding 1 left in gray may never happen. I will never get my car judged I'm just anal about the details LOL.

[Cal55]

Thanks I found a set of NOS with the correct part number. I will just change both so they match. I spoke with Gordon and he told me if they made a change in vendors on the line they used all of the old's first so finding 1 left in gray may never happen. I will never get my car judged I'm just anal about the details LOL.

That's great you found some NOS ones. I know what you mean about being picky about certain things. I guess that would bother me too just knowing it's there. Good luck with the car!
Joe