Any interest in door sill protectors?

[Z51JEFF]

I made a few sets of these a few years ago and a few people have shown some interest in buying a pair.I would have to buy a 4 by 8 foot sheet of aluminum,pay the water jet owner to cut the out,finish the piece and ship each set in a PVC tube for protection.The ZR-1 logo I had made years ago,I have a few sets left but none to sell to Id have to get these made as well.Id be looking at selling a set of these for between $40-$60 a set finished ready to put in your car.The friend that put me in touch with the water jet owner years ago estimated I could get between 15 to 20 sets out of the sheet of aluminum.If enough people want a set of these Ill see about getting it done.The ZR-1 logo colors at this point would be an option Id look into,once the logo maker has the program its just a matter of changing out the color of the film in the machine to the next color.These are brushed aluminum.Ill get the car outside in a day or 2 and get some better pictures.http://i10.photobucket.com/albums/a136/FLYTYM/DSC00357_zps95b3b102.jpghttp://i10.photobucket.com/albums/a136/FLYTYM/DSC00359.jpg

[Dynomite]

Interested in two sets :thumbsup:

[HAWAIIZR-1]

I'm definitely interested in a set!!!

Thanks!!

[PhillipsLT5]

What holds them in place?

[Z51JEFF]

What holds them in place?

3M Pressure Sensitive Tape -PST-,the same stuff used on side trim.Ive gottin a few PMs about making these,I need 15 sets in order for this to work.Ill pull the car out of the garage and get some better pictures in a day or 2.

[Fully Vetted]

Count me in. Those should look pretty good with the sill protectors I'm having made.

[RyanChappel]

They look good.

[tf95ZR1]

Interested. Price range?

[PhillipsLT5]

I am interested, Ted it says 40 to 60 for set

[Torchred96]

Definitely! Let me know where to paypal.

[rkreigh]

I'm in, they look great

also interested in a carpet protector for up front. I have some plastic parts on there that look terrible

[Z51JEFF]

I tried to get some pictures today,this is the only one that came out.Ive started looking for the aluminum,the place i got these from doesnt have brushed aluminum anymore so I need to find a new supplier.http://i10.photobucket.com/albums/a136/FLYTYM/DSCN0035_zps4d834855.jpg

[5ABI VT]

That looks great ! Ill take a set if they're available! Can mine be flipped and the logo on the other side? I'll edit a photo so you know what I'm asking :)

[Rex Ruby]

If you are having them cut out with a water jet how about just cutting out the ZR-1?

[G8nightman]

I would be in.

[Z51JEFF]

If you are having them cut out with a water jet how about just cutting out the ZR-1?

More money plus the guy that will be doing this is doing it as a side job,dont want to take up too much of his time.Im having a hard time finding the brushed aluminum so this might not work out

[icarus-54]

interested in a set

[DennisC]

Who was looking at making up some more door sill protectors that had the splash design? i can't find that anywhere in the forum?

[DennisC]

Never mind found them on ZR-1 Parts for sale.

[JimZRyd]

These are cool! I'd definitely be interested in a set! David aka Fully Vetted was the other member who was discussing the ones that slip over the sill. I'd like a set of each in order to protect the sill the most.

[DennisC]

Yeah I will probably do the same too...

[GOLDCYLON]

Interested in two sets :thumbsup:


X 1 more

[BigJohn]

X 1 more


Why only one????

:neutral:

[Dynomite]

X 1 more

I think you are talking one set?

I knew you would be on board Daryll......:dancing
Now to get you involved with the Billet Aluminum Belt Tensioner Pulley, The Fuel Line Billet Aluminum Bracket by Carter, and the Red Tow Adapter :D

Oh....and you just got to get one of Carter's Oil Filter Billet Aluminum Covers :thumbsup:

[RedrockLT5]

Count me in for a set.

[Z51JEFF]

I just talked to the water jet guy and hes going to look into some material.I cant find the brushed aluminum so Im looking at brushed stainless steel at 1/8 inch thick.These are the decals Im going to have made,I had these made years ago.Im open to options as far as colors but nothing fancy,basic body colors and maybe the full ZR-1 emblem in body color meaning it will look like the hood-bumper emblem if I can get the detail right and it looks good,if you get the piece too small you cant get multiple layers of the vinyl to pick up the detail.http://i10.photobucket.com/albums/a136/FLYTYM/DSCN0081_zps2dd2248f.jpg