Need Source for Black Chassis Paint

[Jagdpanzer]

I'm changing the engine out and would like to spiff up the engine bay. A couple of areas need the paint touched up. Anyone have a good recommendation for C4 chassis semi gloss black paint preferably in a rattle spray can?

[LGAFF]

Try eastwood....or MidAmerican Designs/Corvette carries alot of corvette correct colors

[secondchance]

I'm changing the engine out and would like to spiff up the engine bay. A couple of areas need the paint touched up. Anyone have a good recommendation for C4 chassis semi gloss black paint preferably in a rattle spray can?

Must be getting close!
I would use this and if too flat go over with satin black after POR15 has cured completely.

http://www.eastwood.com/rust-encapsulator-28193.html

[RICKYRJ1]

Must be getting close!
I would use this and if too flat go over with satin black after POR15 has cured completely.

http://www.eastwood.com/rust-encapsulator-28193.html
I agree or if it is to much of a hassle just put that engine in my car. Will she be ready for Carlisle?

[LT5-1935]

Must be getting close!


http://www.eastwood.com/rust-encapsulator-28193.html

EASTWOOD

[HAWAIIZR-1]

Must be getting close!
I would use this and if too flat go over with satin black after POR15 has cured completely.

http://www.eastwood.com/rust-encapsulator-28193.html

Phil

I'm with Yun on this one and love the POR-15 that I did my chassis with; they do have semi-gloss and it will last your lifetime and more. I don't think they have rattle can though, but it does brush on nicely without evidence of brush strokes, etc. You can whack it with a hammer and it won't chip or get damaged.:cheers:

[batchman]

For rattle can stuff Rustoleum Appliance Epoxy is hard to beat.

Have had trouble painting over POR-15 but that could have been too soon.

Cheers,
- Jeff