91vettezr1
07-03-2013, 10:16 PM
Hi,
Selling a used set of 18" Fikse FM/5's wheels black anodized.These are from a C5 Corvette. Rears are 18"x 11" with new 315/30/18 Michelin Pilot Sports, fronts are 18" x 10" with 275/35/18 new Michelin Pilot Sports. Tires were never ridden on. Not sure of the offset but these will fit 90-95 ZR-1's with a 1.5" spacer on the rear.no spacer needed in front. Of course they will fit all c5 Corvettes. Front lip to face on rear is 1 3/4", and measurement on inside from flat pad where lug holes is 8". On the fronts .from lip to face is 1.5" and measurement from measurement on the inside from flat pad where lug holes to edge is 7 3/4".Also incuding 1.5" wheel spacers.
Comes with New McGard Lug nuts and wheel locks. Just had the wheels high speed mounted on Hunter gsp9700, using stick on weights. Also installed new o-rings on the center caps,new anodized bike master valves stems. Also had a body shop paint the red striping on the wheels edge. This is not a cheap decal. Stripe can easily be removed with some laquer thinner.I thought it made the wheels really pop.Overall rims are in excellent condition with no curbing and very clean on the inside. I was going to use these on my 94 ZR-1 but need some money for my daughters college bills.Asking $2400 plus shipping. I can deliver from exit 12 on rt 80 to exit 168 in NJ or they can be picked up at my house or work. Shipping would be around $200 for all 4. I have more pics tomorrow with them on the car. Pics below. email me directly @ toddcerami@comcast.net
http://s1246.photobucket.com/user/fredflypogger/slideshow/rims%20fikse
Selling a used set of 18" Fikse FM/5's wheels black anodized.These are from a C5 Corvette. Rears are 18"x 11" with new 315/30/18 Michelin Pilot Sports, fronts are 18" x 10" with 275/35/18 new Michelin Pilot Sports. Tires were never ridden on. Not sure of the offset but these will fit 90-95 ZR-1's with a 1.5" spacer on the rear.no spacer needed in front. Of course they will fit all c5 Corvettes. Front lip to face on rear is 1 3/4", and measurement on inside from flat pad where lug holes is 8". On the fronts .from lip to face is 1.5" and measurement from measurement on the inside from flat pad where lug holes to edge is 7 3/4".Also incuding 1.5" wheel spacers.
Comes with New McGard Lug nuts and wheel locks. Just had the wheels high speed mounted on Hunter gsp9700, using stick on weights. Also installed new o-rings on the center caps,new anodized bike master valves stems. Also had a body shop paint the red striping on the wheels edge. This is not a cheap decal. Stripe can easily be removed with some laquer thinner.I thought it made the wheels really pop.Overall rims are in excellent condition with no curbing and very clean on the inside. I was going to use these on my 94 ZR-1 but need some money for my daughters college bills.Asking $2400 plus shipping. I can deliver from exit 12 on rt 80 to exit 168 in NJ or they can be picked up at my house or work. Shipping would be around $200 for all 4. I have more pics tomorrow with them on the car. Pics below. email me directly @ toddcerami@comcast.net
http://s1246.photobucket.com/user/fredflypogger/slideshow/rims%20fikse